Lie-Nielsen Blades & Accessories

These Lie-Nielsen screwdrivers are made to fit specific screws on Lie Nielsen tools. They may be useful for other jobs as well. Modelled after gunsmith's screwdrivers with machined tips, they are correctly sized to fit the screw slots, giving you good power and control without slipping. The Chipbreaker and frog adjustment screwdriver are particularly useful. The blades are hardened 416 Stainless...

Replacement blade for the Lie-Nielsen No. 95 Edge Planes. Comes with a 25° flat ground bevel. 1.105" wide x .125" thick A2 cryogenically treated Tool Steel

Replacement blade for Lie-Nielsen No. 041 Small Shoulder Plane. Comes with a 25° flat ground bevel. 5/8" wide x .140" thick A2 cryogenically treated Tool Steel

Replacement blade for the No. 40-1/2 Scrub Plane. Comes ground with a 3" radius. * 1.450" wide x 3/16" thick * A2 Tool Steel

Replacement blade for the Lie-Nielsen No. 97½ Small Chisel Plane. Comes with a 25° flat ground bevel. 1¾" wide x 3/16" thick A2 cryogenically treated Tool Steel

Replacement blade for the Lie-Nielsen No. 212 Small Scraping Plane. The blade is double tempered A2 Tool Steel, hardened to Rockwell 60-62. Their heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish very...

Image shows non-toothed blade Toothed Replacement blade for the Lie-Nielsen No. 610 Low Angle Jack Rabbet Plane. Toothed blades have small chisel-like teeth. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane. The blade comes with a 25° flat ground bevel. The blade comes ready to use, but honing a secondary bevel of 5° or 10° will...

Replacement blade for Lie-Nielsen No. 3 Bench Plane. A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...

Replacement blade for Lie-Nielsen No. 4 or 5 Bench Planes. A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror...

Replacement blade for Lie-Nielsen No. 8 Bench Plane. A2 Steel, Cryogenically treated, hardened to Rockwell 60-62 and double tempered. Lie-Nielsen heat treating technique ensures that the blade will take and hold a very fine edge for a long time. After heat treating, the blade is fully surface ground on the top, back, and cutting edge, giving a smooth, flat surface that will take a mirror finish...

Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane. Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane. The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°. The blade comes...

Lie-Nielsen toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow this with a fine-set Smoothing Plane. Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots. We recommend that you hone your...

If you prefer a higher angle for your plane blade you can either fit a 50 degree (York Pitch) or a 55 degree (Mid Pitch) frog. Most planes have their blades at an angle of 45°, known as common pitch. But the famous English Smoothers like Norris are usually 50° (York Pitch) or 55° (Middle Pitch). The higher pitches make smoothing difficult wood easier. These 50 degree frogs will fit Lie-Nielsen...

Replacement blade for Lie-Nielsen No. 042 Medium Shoulder Plane. Comes with a 25° flat ground bevel. * 3/4" wide x .140" thick * A2 cryogenically treated Tool Steel

Replacement blade for the Lie-Nielsen No. 102 Low Angle Block Plane. The 1¼" wide 1/8" thick A2 steel blade comes with a 25° flat ground bevel.

For use in Lie-Nielsen No. 49 Tongue & Groove Plane. Centres on 1/2" stock, leaving a .166" wide tongue and .230" deep grooves. On narrower or wider boards, the tongue will be offset from centre, but still hidden within the joint. * Comes with a 25° flat ground bevel. * 3/16" thick, O1 Steel. !!!!Note:!!!! Blade does not work in vintage Stanley planes.

Replacement blade for the Curved or Flat Sole Boggs Spokeshaves. Comes with a 25° flat ground bevel. * 2" wide x 1/8" thick * A2 cryogenically treated Tool Steel

Seven hardened, double-ended blades will make 14 standard shapes. The blades will fit antique Stanleys as well, for those who have or acquire one without blades. Made from A2 Tool Steel, 5/8" (1.58cm) wide. The blade profiles include: 1/16", 5/64", 1/8", 5/32", 3/16", and 1/4" Single Beads 3/32" and 1/8" Fluting 1/8" Double Reed 1/16" and 5/64" Triple Reeds 1/16" Quadruple Reed 3/32" Double Concave 3/32"...