Knives: Page 3

This well balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140 Wide Centring Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of the blade, it will self centre in the jig, giving you the same result on both bevels. The longer clamp stabilises...

A strop is a leather strip used to polish the edge of a chisel, plane iron or a knife. Stropping is the final part of the sharpening process in achieving a truly sharp edge. Stropping has always been the accepted way to finishing a cut throat razor guaranteeing the closet of shaves. Unlike honing which removes metal from the bevel, stropping burnishes away any microscopic metal strands clinging to...

This Flexcut Knife Strop has an 8'' by 2'' leather stropping surface, designed exclusively for keeping your knife blades sharp. Includes Flexcut Gold Polishing Compound.

Pfeil Honing Strops for the finest edges for all knives. Birch base, faced with a fine calf leather. Size 300 x 40 x 20mm

Micro fine abrasive paste achieves a mirror finish after initial sharpening using a leather strop. 8,000 - 10,000 Grit. Micro fine abrasive cream to create a mirror finish after initial sharpening using a leather strop. Leaves tools a super keen cutting edge to give clean accurate cuts. Simply apply paste to the strop, rub to absorb and then stroke the edge to be polished across the strop until polished...

The honing compound is used together with the Tormek Leather Honing Wheels. The unique qualities of the leather together with the honing compound will effectively remove the burr created from sharpening, without damaging the edge. At the same time, it will also polish the bevel to the finest finish. The honing compound contains a combination of micro abrasives and polishing components (average...

For hunting knives and those with blades over 8". Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).

This larger knife holder is ideal for hunting knives and knives over 8" long. Both jigs can be adjusted using the collar on the arm to allow for steep and shallow sharpening bevels. Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.

The Tormek Small Knife Holder SVM-00 opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen. Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle. The holder works together with the Tormek Knife Jig SVM-45. You can sharpen...

Ron Hock High Carbon kit to create a Chef's Knife with a 5" blade , 1/8" thick - sold without handles and include 3 steel pins. General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is...

Ron Hock kit to create a Slicing/Carving Knife with 8" blade, 1/8" thick - sold without handles and include 3 steel pins. General Info on the Hock Tools Knife Kits - The top quality, high carbon tool steel in these blades makes a superior cutting tool in the kitchen. While stainless cutlery can be handy nothing cuts better in the kitchen than high-carbon tool steel. This is O1 tool...