Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket ChiselLie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen have gone big! After many years of it being discussed we have 1-1/2'' version of their beloved chisels. The Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make, but Stanley and others once produced these chisels in a vast array. Socket chisel handles are less likely to...
£157.00 inc VAT
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 bevel edge chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening. The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable,...
from £99.95 inc VAT

Lie-Nielsen Set of 5 Bevel Edge Chisels
Lie-Nielsen Set of 5 Bevel Edge Chisels
The ever popular Lie-Nielsen A2 bevel edge chisels as a set. The most popular 5 sizes are included - 1/4", 3/8", 1/2", 3/4", 1". This does not include a tool roll.
£490.00 inc VAT
Lie-Nielsen 7 Tool Chisel Roll
Back In Stock
Lie-Nielsen 7 Tool Chisel Roll
7 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
£105.00 inc VAT

Lie-Nielsen 9 Tool Chisel Roll
Back In Stock
Lie-Nielsen 9 Tool Chisel Roll
9 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
£115.00 inc VAT
Lie-Nielsen 12 Tool Chisel Roll
Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
£115.00 inc VAT

Lie-Nielsen Mortice Chisels
Lie-Nielsen Mortice Chisels
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut. Made of A2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. Maine-harvested Hornbeam handles. Overall length is approximately 10.5". The bevel is ground sharp at 30º, but a higher secondary...
£132.00 inc VAT
Lie-Nielsen Mortice Chisel Roll
Lie-Nielsen Mortice Chisel Roll
7 pocket leather tool roll, Brass fittings. Deeper tool roll accommodates the Lie-Nielsen mortise chisels. Beautifully made in Maine, USA.
£105.00 inc VAT

Lie-Nielsen Corner Chisel 3/8''
Back In Stock
Lie-Nielsen Corner Chisel 3/8''
Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely. Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Beveled at 30º. Comes with a Hickory handle. Overall length is approximately 10". Currently...
£175.00 inc VAT
Lie-Nielsen Fishtail Chisel 5/8''Lie-Nielsen Fishtail Chisel 5/8''
Back In Stock
Lie-Nielsen Fishtail Chisel 5/8''
Fishtail Chisels are perfect for reaching the back corners of half-blind dovetails and paring other hard-to-reach areas. Their unique shape offers versatility for right and left hand recesses. Made from A2 Tool Steel, hardened to RC 60-62. Maine-harvested Hornbeam handles. Overall length is approximately 8". The bevel comes ground sharp at 25º, but a higher secondary bevel is advisable,...
£148.00 inc VAT

Lie-Nielsen Chisel HandlesLie-Nielsen Chisel Handles
Lie-Nielsen Chisel Handles
Lie-Nielsen chisel handles are made from Maine-harvested Hornbeam and can be used with any of the Lie-Nielsen chisels. The standard handle is recommended for all but the largest chisels. Long chisel handles are 4" longer than the standard handles. Excellent for paring. The Mortise chisel handles are slightly larger in diameter and length than the standard chisel handle, the Mortise Chisel Handle...
from £27.00 inc VAT