Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

   
 

Secure Online Shopping


Online Catalogue >  Books & DVDs  >  DVDs  >  Tools & Techniques  >  David Charlesworth


Drawer Making & Fitting with David Charlesworth
Ref: DVD-DMAF-DC


In this DVD, David Charlesworth shows the making and fitting of a first class, English Arts and Craft’s drawer.

This exhibition quality drawer has an effortless, silky action for two thirds of its opening. It then tightens slightly in the carcase, preventing it from being inadvertently pulled out. The flush drawer slip with scratch bead, gives an elegant result, suitable for the storage of photographs and documents.

Chapters
1. Introduction
2. Materials
3. Design
4. Preparation of Components
5. Shooting
6. Creating Drawer Slips
7. Marking Dovetails
8. Cut Tails with Bandsaw
9. Barrel Curve
10. Shellac Inside
11. Drawer Glue Up
12. Fitting Drawer Slips
13. Rout Rebates for Tongues
14. Fit Drawer Bottom Assembly
15. Initial Clean Up
16. Drawer Slips Glue Up
17. Clean Up
18. Carcase Construction
19. Fitting the Drawer
20. Final Details

162 minutes, Lie-Nielsen Toolworks Productions, 2015.

Price Includes VAT 


Price: 29.95 (Including VAT at 20%)

Drawer Making & Fitting with David Charlesworth

Quantity:  



David Charlesworth - Hand Tool Techniques - Part 1
Ref: DCDVD1


Hand Tool Techniques - David Charlesworth & Lie-Nielsen Toolworks

David Charlesworth has been teaching fine furniture making at his Devon workshop since 1977 and is widely respected as a writer for Furniture & Cabinate Making magazine. His speciality is getting the most out of hand tools in precise, original and efficient ways.

* Part 1 - Plane Sharpening - keeping your waterstones flat, preparing the back of your blade, The Ruler trick, honing the bevel, preparinga curved blade, re-sharpening a curved blade, fetling the chip-breaker, assembly of the blade and chipbreaker and setting up the plane.

DVD 75 mins Code DCDVD1  


Price: 21.44 (Including VAT at 20%)

David Charlesworth - Hand Tool Techniques - Part 1

Quantity:  



David Charlesworth - Hand Tool Techniques - Part 2
Ref: DCDVD2


Part 2 - Hand Planing - stop shavings and stright edges, datum surfaces, bumps, face edge, wind, thicknessing to a gauge line, planing end grain and square edges, placing a knife line, flattening your benchtop.

DVD 93 mins Code DCDVD2 


Price: 21.44 (Including VAT at 20%)

David Charlesworth - Hand Tool Techniques - Part 2

Quantity:  



David Charlesworth - Hand Tool Techniques - Part 3
Ref: DCDVD3


David Charlesworth's 3rd DVD

Hand Tool Techniques Part 3 - Precision Shooting Simplified.

63 minutes Code DCDVD3 


Price: 21.44 (Including VAT at 20%)

David Charlesworth - Hand Tool Techniques - Part 3

Quantity:  



David Charlesworth - Hand Tool Techniques - Part 4
Ref: DCDVD4


Part 4 - Hand Tool Techniques: Precision Preparation of Chisels for Accurate Joinery

Chisels are an essential part of every woodworker’s kit. Preparing chisels for precise work differs in some important ways from preparing plane blades. In this DVD, a companion to David’s DVD on the treatment of plane blades, he explores these differences. His techniques employ waterstones and a simple triple bevel to speed the honing process and get a razor-sharp edge in minutes. The dvd also demonstrates methods for avoiding the 'dreaded' hollow waterstones and 'bellied' chisel backs. "

64 minutes. Code DCDVD4 


Price: 21.44 (Including VAT at 20%)

David Charlesworth - Hand Tool Techniques - Part 4

Quantity:  



David Charlesworth - Hand Tool Techniques - Part 5
Ref: DCDVD5


Chisel Techniques For Precision Joinery.

David Charlesworth unlocks the secrets of chisels, simple but sophisticated tools.

Properly tuned and used chisels are capable of very precise freehand work.

Join David's exploration of this versatile tool.

- Cutting single lap dovetail
- Horizontal paring
- Chopping waste between pins
- Note on guide blocks
- Mortise and Tenon
- The release cut
- Tenting
- Final paring
- Note on faceted pegs
- Paring the tenon

Running time 100 minutes. Lie-Nielsen Toolworks Productions, 2007. Available in DVD only.
 


Price: 21.44 (Including VAT at 20%)

David Charlesworth - Hand Tool Techniques - Part 5

Quantity:  



David Charlesworth Furniture Making Techniques: Five Topics
Ref: DCDVDFMT


In David's sixth DVD explores five important skills that will help you refine your woodworking.

Woodworkers often debate the best way to get a smooth surface directly from the hand plane on difficult to plane woods. David's techniques are easy and effective. Other tips on edge jointing, finish planing an assembled frame and panel, crisp decorative bevels to finish edges, and the effective use of the shoulder plane are all well thought out and refined by years of experience.

3 hours long 


Price: 33.95 (Including VAT at 20%)

David Charlesworth Furniture Making Techniques: Five Topics

Quantity:  



David Charlesworth's Furniture-Making Techniques
Ref: BOOK-13509


In this indispensable new guide to the basic principles of furniture making David Charlesworth reinforces his status as a dedicated commentator and teacher of the craft. This book is an ideal workshop accessory, with easy to follow instruction on the use of hand tools and how to build confidence and creativity with new, or maybe just rusty, techniques. Designed to encourage the complete beginner and challenge the student or keen amateur, all woodworkers will glean inspiration from the sound knowledge and advice within these pages. The book is suitable for all levels and abilities and includes tips & techniques on how to get the best from hand tools. 


Price: 14.99

David Charlesworth's Furniture-Making Techniques

Quantity:  



The Secret Mitre Dovetail with David Charlesworth
Ref: DVD-TSMD-DC


From his workshop in Devon, David discusses the Secret Mitre Dovetail, which has a reputation for being among the most difficult joints to cut successfully. In this DVD, David will show you that this fascinating joint, with many uses, is not as hard as one might think. David’s specialty is getting the most out of hand tools in precise, original and efficient ways, and his methods aim to eliminate common problems.

Chapters:
1. The Joint and its History
2. Timber Preparation
3. Clamping Blocks
4. Designing the Joint
5. Marking Out
6. Rebates
7. Marking the Pins
8. Roughing Out
9. Final Cuts
10. Pin Board Edge Mitres - Sawing
11. Pin Board Edge Mitres
12. Transfer
13. Sockets
14. Assess Fit and Adjust
15. Socket Board Edge Mitres
16. The Long Mitre
17. Preparing for Glue Up
18. Sawing Off Clamping Blocks
19. Final Planing

168 minutes, Lie-Nielsen Toolworks Productions, 2014.

Price incl VAT 


Price: 29.95 (Including VAT at 20%)

The Secret Mitre Dovetail with David Charlesworth

Quantity:  



The David Charlesworth DVD Collection
Ref: DCDVDSET


Hand Tool Techniques Part 1: Plane Sharpening
Hand Tool Techniques Part 2: Hand Planing.
Hand Tool Techniques Part 3: Precision Shooting Simplified.
Hand Tool Techniques Part 4: Precision Preparation of Chisels for Accurate Joinery.
Hand Tool Techniques Part 5: Chisel Techniques For Precision Joinery.
Furniture Making Techniques: Five Topics
The Secret Mitre Dovetail with David Charlesworth
Drawer Making & Fitting with David Charlesworth

900 minutes (15 hours)
 


Price: 185.00 (Including VAT at 20%)

The David Charlesworth DVD Collection

Quantity:  


 

Online Catalogue >  Books & DVDs  >  DVDs  >  Tools & Techniques  >  David Charlesworth