Lie-Nielsen No.60 1/2 Block PlaneLie-Nielsen No.60 1/2 Block Plane
Back In Stock
Lie-Nielsen No.60 1/2 Block Plane
The Lie-Nielsen No 60½ Block Plane is based upon the old Stanley No 60½. This is a superb little block plane and should be in your tool kit, useful for all woodworking jobs in particular great for trimming end grain. The movable shoe in front of the blade allows you to easily adjust the mouth opening - fine mouth for finishing your work and wafer thin shavings or the wider opening...
£199.00 inc VAT
Veritas Low-Angle Block Plane + PM-V11 BladeVeritas Low-Angle Block Plane + PM-V11 Blade
Veritas Low-Angle Block Plane + PM-V11 Blade
Veritas have made a block plane that uses a ''Norris'' style combined sideways (lateral) and up and down adjustment which gives you greater control when adjusting its impressive 1/8'' thick by 1 5/8'' wide PM-V11. This plane also overcomes one of the drawbacks of other block planes in having higher side wings (ideal for shooting) with finger grips in each side. The...
£195.00 inc VAT

Veritas DX60 Block Plane + PM-V11 BladeVeritas DX60 Block Plane + PM-V11 Blade
Veritas DX60 Block Plane + PM-V11 Blade
This Veritas DX60 block plane is one of the finest planes that Veritas have ever made. 4 years of design work culminates in a superb plane made to exacting standards and featuring newly refined stainless-steel hardware. The knob and wheel have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an...
£265.00 inc VAT
Clifton Adjustable Low Angle Block Plane
Clifton Adjustable Low Angle Block Plane
Made from bronze, this block plane aims to offer the ultimate in comfort and style. Aiming to fit your hand perfectly with it's high quality walnut handle, this block plane will allow you to shave the surface of your project with ease. Made from a high quality bronze casting, made here in Sheffield UK, this is then finished with the new signature graphite colour on the body to offer one of the...
£305.00 inc VAT

Veritas Standard Angle Block Plane + PM-V11 Blade
Veritas Standard Angle Block Plane + PM-V11 Blade
This is the standard angle version of the Veritas low angle block plane. Preferred for general-purpose work, the 20° bed angle plus the 25° bevel angle on the bevel-up blade result in an effective cutting angle of 45°, the same as found in most bench planes. A low-profile lever cap results in a plane that fits the hand well, at only 1/8" higher than its low-angle sibling. Mechanically,...
£219.00 inc VAT
Lie-Nielsen No.507 Rebating Block Plane
Lie-Nielsen No.507 Rebating Block Plane
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished bronze. The throat is non adjustable. It is 6¼" long...

5

£218.00 inc VAT

Veritas Skew Block Plane + PM-V11 BladeVeritas Skew Block Plane + PM-V11 Blade
Veritas Skew Block Plane + PM-V11 Blade
The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A Bubinga knob locks the toe...
£274.00 inc VAT
Lie-Nielsen No.140 Skew Block Plane - Iron (Right)Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
Back In Stock
Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
The Lie-Nielsen No 140 Skew Block Plane in iron. This is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A retractable nicker scores cross-grain fibres, and the removable side plate and adjustable fence allow quick conversion to rabbeting...
£450.00 inc VAT

Lie-Nielsen Bronze Low Angle Block Plane
Lie-Nielsen Bronze Low Angle Block Plane
The Lie-Nielsen small bronze Low Angle Block Planes fit perfectly in the hand and slip easily into the pocket. The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive Stainless Steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The mouth is not adjustable. The blade in the Low Angle Plane is bedded at 12° for fine cuts...

5

£169.00 inc VAT
Veritas Pocket Plane + PM-V11 Blade
Veritas Pocket Plane + PM-V11 Blade
The Veritas Pocket Plane at just 4½" long and 1¼" wide overall, and weighing just less than 11oz, is aptly named - it's small and light enough to carry in an apron pocket all day. Designed with a bevel-up configuration and a fully functional combined feed and lateral adjustment mechanism, it has a finer cutting action than you might expect from such a small tool. This makes it admirably suited...
£125.55 inc VAT

Veritas Apron Plane + PM-V11 Blade
Veritas Apron Plane + PM-V11 Blade
This small, low-angle block plane from Veritas is the answer to a trim carpenter's prayers. At only 14oz it is half the weight of a standard block plane, a significant factor if you want to carry it with you all day. The 5½" long, tough ductile cast iron body will take job-site accidents in stride. This is not a plane body that will break when dropped. It has good hand feel; the unique side...
£138.00 inc VAT
Lie-Nielsen Model Maker's Block Plane No.100
Lie-Nielsen Model Maker's Block Plane No.100
This delightful, small low angle tool fits snugly in the palm of your hand. It is a miniature work-horse ideal for all sorts of chamfering and trimming jobs. Blade is 7/8" wide, .125 thick. At 4 3/8" long and 1 1/4" wide, weighing 8oz, this plane is effortless to use.
£105.00 inc VAT

Lie-Nielsen No.100 1/2 Convex Sole Block PlaneLie-Nielsen No.100 1/2 Convex Sole Block Plane
Lie-Nielsen No.100 1/2 Convex Sole Block Plane
This is a sweet little plane from Lie-Nielsen Toolworks. This curved sole low angle block plane is perfect for all sorts of hollowing jobs, chair seats, mouldings, model making, etc. The radius across the width of the sole is 3 inches, from end to end the radius is 27 inches. The sole is 3 1/2 inches long and the overall length with the squirrel tail handle is 5 inches. The 1/8 inch thick...
£150.00 inc VAT
Lie-Nielsen No 101 Violin Maker's Plane
Lie-Nielsen No 101 Violin Maker's Plane
This pocket-sized block plane is the smallest of the Lie-Nielsen hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut. Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability,...
£132.00 inc VAT

Veritas Miniature Low Angle Block Plane
Veritas Miniature Low Angle Block Plane
This version of the Veritas low-angle block plane is about a third the size of the original. At just under 2½" long and ¾" wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use. The stainless-steel Norris-style adjuster...
£68.45 inc VAT