Starrett Adjustable Tri-Squares
Starrett Adjustable 90° precision tri-squares with 1mm and 1/2mm graduations on both sides.
13MA 100mm blade
13MC 150mm blade
Starrett Student Combination Square 150mm
The Starrett Student Metric Combination Square was designed to train and develop young people including apprentices to lay out and check their work more efficiently. The combination square is far superior to clumsy, old-style solid workshop-grade squares that are still in use but at a price students can afford.
The combination square can be used as a try square, 45º mitre, a depth gauge, a...
Starrett Combination Squares 90 & 45 degree
Starrett Combination Squares available in 150mm, 300mm or 600mm hardened steel rule. Cast iron head with locking nut, scribe and integral spirit level.
The Metric rules have mm and 1/2mm graduations on both sides.
The 300mm Metric/Imperial rule has a Satin chrome finish with 0.5mm and 32nds graduations on one Side; mm and 64ths on the reverse side.
Starrett Combination Sets 300mm
These Starrett 300mm Combination Sets are a super reliable piece of kit. The Starrett Combi set comes with three cast iron heads and a black wrinkle finish.
The square head has 90° and 45° reference faces, an integral spirit level and a useful scribe.
The centre head helps you find the centre of circles such as dowels. You'd probably guessed that by its name, but still a helpful...
Starrett Double Steel Square - Metric
Designed for tool and diemakers, these fine precision double steel squares from Starrett have adjustable blades, ideal for tight fits. 50mm Complete with Graduated, Graduated Narrow/Bevel Blades.
Narrow blade has mm and ½mm graduations. It is 4mm wide over a length of approximately 41mm and cut away at one end to a width of 2.4mm
Beveled blade is 45º on one end and 30º on the...
Starrett Combination Blades - Metric \ Imperial
Available as either a 300mm or 600mm hardened steel rule available in Metric/Imperial (1/2mm and 32nds One Side; mm and 64ths Reverse Side)
Satin chrome finish makes these rules much easier to read than the regular finish blades.
Prices incl VAT
Starrett Combination Blades - Metric Only
Available as either a 300mm or 600mm hardened steel rule available in Metric (mm and 1/2mm both sides)
Satin chrome finish makes these rules much easier to read than the regular finish blades.
Starrett Square Head (only)
Square Head for Combination Squares, Combination Sets and Bevel Protractors.
Can be used with the following rules:
Starrett Combination Blades - Metric
Starrett Combination Blades - Metric/Imperial
12" and 24" Sterling Combination Square Rules
300mm and 600mm Sterling Combination Square Rules
Starrett Square Head (only) for 4' Combination Squares
Black Wrinkle-finished, cast iron steel center head.
Can be used with the following rules:
Sterling Dovetail Rule
Starrett Square Head (only) for 6' Combination Squares
Black Wrinkle-finished, cast iron steel center head.
Can be used with the following rules:
6" Sterling Combination Square Rule only
100mm and 150mm Sterling Combination Square Rules only
Starrett Combination Square Attachment 1
These Starrett Combination Square Attachments fit combination square blades 1" (25mm) wide. They allow attaching rules, blades or thin steel try squares, up to 1" (25mm) wide, at right angles to the blade of the square for laying out key seats, centers, scribing horizontal lines, and measuring diameters.
Blade: 1" (25mm) Range, 1 9/16" (40mm) Length.
Starrett Stair Gage
Starrett's stair gage fixture attachments clamp to a framing or rafter square forms a handy gage for laying out stair stingers, hip, valley, and other rafter cuts plus many unusual cuts.
These fixtures have a smaller area that contacts the square blade.
Fixtures are convenient, small in size and are lower in cost.
Slotted to keep two opposite hexagonal faces at right angles to the edge...