Pro-Edge for Carvers

The main jigs and belts required for sharpening woodturning gouges and chisels. The Robert Sorby ProEdge Woodturners Sharpening Accessory Kit includes...... ProSet Bevel Angle Guide Fingernail Profile Kit Skew Jig Standard Gouge Jig Ceramic Belt 60 grit - x1 Ceramic Belt 120 grit - x1

Buffing Mop to fit the ProEdge Sharpening Machine. Also part of the Buffing Kit (PEBUFFKIT)

The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges. This set contains the arm and the boss but both items are available individually.

Honing wheel to fit the ProEdge Sharpening Machine. Also part of the Honing Kit (WPEPHONEKIT)

This kit uses the abrasive honing wheel which can be shaped to allow for honing of gouge flutes - especially useful for woodcarving tools. Items also available individually.

This common abrasive is designed primarily to sharpen carbon steel bench chisels, carving tools and plane irons but will also hone harder high speed steel tools. The material longevity is at the lower end of the abrasives scale they use on their belts, but makes an excellent economical choice. Work your way through grit sizes (heavier grits for the removal of more material) to achieve a fine finish...

This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.

The Robert Sorby ProEdge Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long. Please note that you will already need to own a jig to use this (either the PEKJIGS or PEKJIGL).

Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset. By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.

Perhaps the most popular in the range of belts. This robust material is designed to handle the demands of all steels. Not strictly 'grit sizes' these belts are built using brick and pyramid abrasive shaping. The highest 3000 'grit' size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.

Increases access when tools are getting old and worn.

This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). This jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform. Ideal for sharpening chisels and plane irons.

The updated version of the ever popular Robert Sorby ProEdge sharpening system. In all honesty the machine has remained the same as nothing really needed to be updated! Robert Sorby have however changed from using the old terms of 'Basic' and 'Deluxe or Plus'. Thankfully it has been simplified, and the Sorby machine comes in one edition which includes a single 120 grit aluminium...