Sold Pre-owned and Second Hand Tools Archive

8” beech bodied spokeshave with1 ½” straight blade, in good order. Stamped Parry & Son 359 Old St. with the Sundial logo. An adjustable mouth beech bodied spokeshave with brass adjusting knobs and curved wear strip to the sole which houses the 3” blade. No cracks, Made by J. Frost Norwich, England. 11 1/2” overall. J.Frost, Norwich dates from 1864-1892. Both...

£65.00 inc VAT

3 Lovely Vintage Brass Backed Saws [Vintage, SOLD]

3 Lovely Vintage Brass Backed Saws [Vintage, SOLD]

Refurbished to a high standard. E C ATKINS 13tpi X- CROSS CUT TENON SAW – DEEP BRASS BACK 14” BLADE – attractive closed handle with ATKINS medallion FROST DOVE STREET NORWICH – SPECIAL – 18tpi DOVETAIL SAW 9” BLADE, CLOSED BEECH HANDLE 12” SPEAR & JACKSON 13tpi X – CUT “Leapfrog” tenon saw All straight bladed. A lovely collection. A...

£99.00 (VAT exempt)

Adze Head [Vintage, SOLD]

A little used adze head (makers mark indistinct) The blade is curved, 70mm across. The adze is 240mm overall with a short pin. Rectangular tapered poll 45mm x 30mm reducing to 38mm x 26mm. The sweep is as showed on the photo. (Medium to tight)

£35.00 inc VAT

Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]

Carpenter’s Adze Head - Brades & Co No.385 [Vintage, SOLD]

This is in G++ condition. Carpenter’s Adze Head - Brades & Co No.385

£30.00 inc VAT

Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]

Colquhoun and Cadman 2 1/4" wide chisel [Vintage, SOLD]

Oooh! – this is magnificent. 2 ¼” edge, an impressive 20” overall with a long handle (7 ½”) & 1 5/8” brass ferrule. We think the handle and ferrule may not be original, but this doesn’t distract from the overall appeal of this monster. It has been sharpened and for a chisel that is possibly 125 years old it is in superb condition. No pitting...

£125.00 (VAT exempt)

E.C.E Wooden Plane [Pre-owned, SOLD]

E C Emmerich Smoothing Plane - 48mm wide blade – Pre-owned We think this has not been used as it presents as new. Lacquered beech body with steamed beech sole. Wooden wedge. Made in Germany. A commission sale.

£80.00 (VAT exempt)

IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]

IOROI Bevel Edge Chisel Set – 9 piece box [Pre-owned, SOLD]

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£295.00 inc VAT

Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]

Japanese Mortise Chisel – 12mm wide [Pre-owned, SOLD]

A stout fella but with 80mm of blade left, enough for the building of a temple or two. 245mm overall. Red Oak handle. Steel strike hoop and ferrule. Little used. Makers stamp but we can’t identify the maker.

£24.00 inc VAT

Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance, SOLD]

Large Carving Chisel – 3/4'' Double Bevel Skew by Flexcut USA [Clearance, SOLD]

These unused tools were discontinued from Flexcut USA’s portfolio of large tools several years ago. These are unused new, old stock tools in perfect condition. Flexcut designed these beefy tools to be stuck with a mallet when working on large sculptures. but of course, they can be used by hand to shape work without whacking with a mallet as required. The old Flexcut code is MC 302 which...

£14.00 inc VAT

Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case [Pre-owned, SOLD]

Lie-Nielsen Toolworks - Curved Boggs Spokeshave with leather case [Pre-owned, SOLD]

Pre-owned but little used in Lie-Nielsen leather case.

£175.00 inc VAT

Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]

Lie-Nielsen Toolworks No.9 Mitre Plane [Pre-owned, SOLD]

Complete with hot dog handle (which currently retails for £92) and the cherry side handle. So this is an earlier No.9 as the cherry handle was replaced over time for the hot dog option. With this purchase you get both! This discontinued plane from heirloom hand tool maker Lie-Nielsen Toolworks has been well cared for by a long-standing customer of Classic Hand Tools. We have sold 4 of these...

£665.00 (VAT exempt)

Marples M6 Jack Plane [Vintage, SOLD]

This Marples jointer plane has a 2 3/8” wide blade (original with correct cap iron and 1 ¾” left in the blade). A few scratches to the distinctive cherry red japanning. Nice handles (rosewood – we think). 18” overall Dating this plane is fun, which we will leave to you (suffice to say we think post 1940). Do your detective work here at this superb William...

£85.00 (VAT exempt)

Record 05 SS Jack Plane [Vintage, SOLD]

With stained beech handles, this Stay-Set (SS) version of the No.5 jack plane is in excellent condition. Stay set refers to the 2-piece cap iron which makes the sharpening of the iron somewhat quicker as you do not have to disassemble the plane iron assembly. Dating from 1950 – 1965 2” wide blade. 1 ½” original iron remains. This may have been refurbished...

£75.00 (VAT exempt)

Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]

Record Compass (Circular) Plane – Record 020 [Vintage, SOLD]

This plane probably dates from about the 1980’s and is in very good condition. There is relatively little wear to the sole and all the things to check for in these planes have all passed (the sole moves freely, no cracks in the casting, all original parts, mouth rivets are not proud of the sole, the lateral blade adjuster works properly, full convex and concave range etc etc).

£105.00 inc VAT

Robert Sorby TURNMASTER Woodturning System (with Excelsior cutters) [Clearance, SOLD]

New This system (RSTM-SCT3) comes with the carbide square cutter plus the following titanium nitride cutters RSTM-GT2 Excelsior Detail Point Cutter RSTM-GT4 Excelsior French Curve Cutter RSTM-GT6 Excelsior Teardrop Inside/Outside Cutter RSTM-GT7 Excelsior Mushroom Cutter

£115.00 inc VAT

Veritas Router Plane Bundle! [Pre-owned, SOLD]

Veritas Router Plane Bundle! [Pre-owned, SOLD]

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£345.00 inc VAT

Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]

Verum 5 ½ Jack Plane, wheel marking gauge, screwdriver set & marking knife set [Pre-owned, SOLD]

Verum bundle - save yourself £125!

£195.00 inc VAT

Woodpeckers 300mm Centre/Standard Rule with Hook Stop [Preowned, SOLD]

The rule has been used sparingly and the hook stop is just out of the packet. The Woodpeckers Metric 300mm Woodworking Rule is a rule you can trust that has a very high level of accuracy. These rules are precision made from aircraft grade aluminium and anodized for surface protection and appearance. Woodpeckers say they are straighter, heavier and are easier to handle than any others on the market. Left...

£38.00 inc VAT

DMT Flattening Plate [Pre-owned, SOLD]

160 Mesh / 95 Micron 'Fine' 10” x 4 “ (250mm x 100mm) Little used we judge. Selling new for about £199 A commission sale.

£105.00 (VAT exempt)

1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]

1” Bevel Edged Cranked Paring Chisel – Buck Bros [Vintage, Refurbished, SOLD]

This is perfectly functional chisel which has been refurbished nicely to include a replacement boxwood London Pattern Octagonal handle. 1” wide, bevel edged, the tang is cranked so to allow for knuckle clearance whilst paring. 13 1/2” overall. (Note - it is difficult to find a new equivalence to give you a price guide, however a shorter bevel edge cranked 1” wide chisel from...

£42.00 (VAT exempt)

Bristol Design Thumb Plane [Pre-owned, SOLD]

Bristol Design Thumb Plane [Pre-owned, SOLD]

A very attractive plane. 5” long x 1 ½” wide with a 11/4” wide blade Steel sole to gunmetal sides Ebony infill Brass lever cap and knurled screw A few blemish marks. The rear left cheek has been resting against something in a tool box. This has caused some discolouration (see photo) and a few pin prick holes in the metal over maybe 1cm. Originally, we...

£145.00 (VAT exempt)

Robert Sorby Framing Chisel – 1 1/4'' (32mm) [Pre-owned, SOLD]

Robert Sorby Framing Chisel – 1 1/4'' (32mm) [Pre-owned, SOLD]

Overall Size: 495mm Blade Length: 267mm Width 32mm This hasn’t done much work at all! So please put me to work!

£54.00 inc VAT

Old Grannies Tooth Router [Pre-owned, SOLD]

Old Grannies Tooth Router [Pre-owned, SOLD]

This tool is larger than your usual granny. She measures 240mm x 90mm x 65mm She has 10mm, 12mm, 14mm, 16mm & 18mm wide straight blades which are currently crudely sharpened and would benefit from being refined (not a difficult task). Not elegant or refined like most grannies but adorable nevertheless!

£30.00 inc VAT

Gifkins Dovetail Jig with F5 Template Upgrade [Pre-owned, SOLD]

Gifkins Dovetail Jig with F5 Template Upgrade [Pre-owned, SOLD]

This Dovetail jig and upgrade template can be studied further on the Gifkins Dovetail Jig page of our website to see if it suits your needs. It is simple to use and will make box making a simpler task for those who like to use a router. We are offering these as a combined special package that would normally set you back £550 They are pre-owned however the jig has been sparingly used...

£360.00 inc VAT

Pfeil Drawknife - 110mm blade [Pre-owned, SOLD]

Pfeil Drawknife - 110mm blade [Pre-owned, SOLD]

Offset cherry handles. 290mm overall. For small scale shaping. Used but with plenty of life left. Could do with a re-sharpen.

£28.00 inc VAT

Clifton Convex & Concave Spokeshaves [Pre-owned, SOLD]

Clifton Convex & Concave Spokeshaves [Pre-owned, SOLD]

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£155.00 inc VAT

Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]

Sargents Woodscrew Sets (5/8'', 3/4'' & 1'') [Vintage, SOLD]

Vintage screw boxes, for cutting thread onto wooden dowels. To cut 5/8”, ¾” & 1” diameter threads on dowels. With taps in original boxes. Made in England.

£85.00 inc VAT

ECE Dovetail Plane [Pre-owned, SOLD]

This is a beech bodied plane with a hornbeam sole from German maker E C Emmerich, founded in Germany in 1852. The skew blade is wedged with adjustment made by striking the strike button at the rear of the plane to loosen the wedge before tapping the iron to adjust depth. A simple thumbscrew loosens the knicker iron for adjustment. There is little wear to this plane, and the strike button shows...

£75.00 inc VAT

Veritas Dual Marking Gauge [Pre-owned, SOLD]

Veritas Dual Marking Gauge [Pre-owned, SOLD]

This pre-owned dual marking gauge has seen little use. This is what we say about this tool in our main Veritas section “The Veritas Dual Marking Gauge has two independently adjustable rods, which will allow you to set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions. Projection up to 5-3/4" is easy to set since an...

£34.00 inc VAT

Veritas Skew Rebate Plane – Right Hand – A2 blade [Pre-owned, SOLD]

Veritas Skew Rebate Plane – Right Hand – A2 blade [Pre-owned, SOLD]

This plane is in very good condition G++ This is what we write about this plane in our main Veritas Tools section ''Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts...

£210.00 (VAT exempt)

Veritas Skew Block Plane – Right Hand [Pre-owned, SOLD]

Veritas Skew Block Plane – Right Hand [Pre-owned, SOLD]

The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A bubinga knob locks the toe...

£195.00 (VAT exempt)

Veritas Honing Guide Bundle [Pre-owned, SOLD]

This bundle includes: The Veritas Mark II Honing Guide with standard clamping head, straight roller base and angle registration jig. This accepts blades between 1/2'' and 2 7/8'' wide and up to 15/32'' thick, including skew blades. It hones bevel angles from 15° to 54° and back bevels from 10° to 20°. Veritas Narrow Blade-Head which accepts blades from...

£120.00 (VAT exempt)

Blue Spruce Toolworks – Small Marking Knife [Pre-owned, SOLD]

Blue Spruce Toolworks – Small Marking Knife [Pre-owned, SOLD]

Beautiful rosewood handle - sparingly used (if at all), this another classic from the old stable of Blue Spruce tools. 7'' overall.

£85.00 inc VAT

Blue Spruce Toolworks – A pair of Skew chisels [Pre-owned, SOLD]

Blue Spruce Toolworks – A pair of Skew chisels [Pre-owned, SOLD]

Beautiful rosewood handles – left and right 3/8'' skew chisels in original packaging. 9'' overall.

£150.00 inc VAT

Blue Spruce Toolworks – 1'' Bevel Edge Chisel [Pre-owned, As New, SOLD]

Resin Infused Maple handled Blue Spruce bench ''OPTIMA'' chisel. 9'' overall. This has its original wax protection on the blade (and that is maybe why the photo appears a little odd!) Pre-owned but as new.

£110.00 inc VAT

Blue Spruce Toolworks – Maple Headed Mallet [Pre-owned, SOLD]

Blue Spruce Toolworks – Maple Headed Mallet [Pre-owned, SOLD]

Resin Infused Maple headed Blue Spruce mallet with African Blackwood handle. Absolutely gorgeous! If I was a mallet, I would fancy the socks off her/him/it! 9'' overall 2'' 1/8” diameter head 13 oz Pre-owned but this hasn’t bashed much, if at all.

£145.00 inc VAT

Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned, SOLD]

Lie–Nielsen Scrub Plane – LN 40 1/2 [Pre-owned, SOLD]

This plane hasn’t done much scrubbing yet as judged by its full iron and excellent overall condition. Boxed. This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g. taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful for shaping irregular objects or creating an interesting, finished...

£185.00 inc VAT

Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]

Philly Planes – Rosewood and Brass Dovetail Plane [Pre-owned, SOLD]

This was a commission plane for an English customer. The plane is a skewed rebate plane with a 1 3/16'' blade set in a 1 7/8'' wide body with a full width fence that is ¾'' deep. The plane is 9 ¼'' long. It has a nicked iron as shown in the photograph and a full length brass wear strip. Philly Planes stamped on the front of the plane. We can...

£250.00 inc VAT

Philly Planes – 24'' Jointer Plane [Pre-owned, SOLD]

Philly Planes – 24'' Jointer Plane [Pre-owned, SOLD]

60mm wide with 4mm thick tombstone shaped blade. Designed to make things flat! This plane has done next to no work. Beech, lovely handle, gentle chamfering. ''PHILLY PLANES MADE IN ENGLAND'' Stamped on the front of the plane. (Also, the initials CWW)

£250.00 inc VAT

Philly Planes – Superior Marking Gauge [Pre-owned, SOLD]

Philly Planes – Superior Marking Gauge [Pre-owned, SOLD]

Brass & rosewood stock, this pre-owned marking, cutting and pencil gauge is beautifully made by Welsh eccentric and tool maker Phil Edwards who is well know for his wooden plane making prowess (if not for his singing – almost a private joke – sorry!). This is what Phil says about this gauge on his website: Our traditional style marking gauge is made from Rosewood, brass and high...

£95.00 inc VAT

Glen Drake – No.2 Hammer [Pre-owned, SOLD]

Glen Drake – No.2 Hammer [Pre-owned, SOLD]

Kevin Glen Drake’s No.2 Hammer weighing in at 9 ounces and is great for light chopping and other joinery work. Model makers and light furniture makers will enjoy the sensitivity that this weight affords. We used to stock these back in the day at Classic Hand Tools before Kevin stopped making them. They were always quite sought after. Marked Glen Drake USA with the head number. Stubby...

£75.00 inc VAT

3 Auriou Rifflers (A) [Clearance, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£80.00 inc VAT

3 Auriou Rifflers (B) [Clearance, SOLD]

A selection of 3 Auriou rifflers from Forge de Saint Juery, France - Clearance This is old stock that has been locked away in a cupboard, unused for 15+ years. Rifflers are mini double ended shaped rasps and Auriou are considered the best practitioners of forging and stitching the teeth onto their own blanks, all by hand. You are buying 3 various rifflers, no shape is repeated in this selection. There...

£80.00 inc VAT

Lie-Nielsen 5/8'' chisel with paring handle [Pre-owned, SOLD]

Lie-Nielsen 5/8'' chisel with paring handle [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£75.00 inc VAT

Blue Spruce Toolworks – 4 beautiful Optima chisels [Pre-owned, SOLD]

Blue Spruce Toolworks – 4 beautiful Optima chisels [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£295.00 inc VAT

Lie-Nielsen No. 4 1/2 Smoothing Plane [Pre-owned, SOLD]

Lie-Nielsen No. 4 1/2 Smoothing Plane [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£375.00 inc VAT

Lie Nielsen Toolworks – No.9 Mitre Plane with hotdog handle [Pre-owned, SOLD]

Lie Nielsen Toolworks – No.9 Mitre Plane with hotdog handle [Pre-owned, SOLD]

Please note: you may only have a maximum of 20 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£725.00 inc VAT

Veritas 3 Saw Bundle [Pre-owned, SOLD]

3 Veritas saws - A fine-tooth dovetail saw, a small X-Cut saw & a double edged flush cutting saw

£105.00 inc VAT

Friday Finds Sold Archive

Classic Hand Tools

Customer Service

Friday Finds Sold Archive

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View