Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

   
 

Secure Online Shopping



Grobet Triangular Saw Files
Ref: TF


To choose the right file, size it to the tooth. Ideally, about half of the cutting surface of the file will be in contact with the tooth -- half of the file will be in the gullet and the other half unused. When you rotate the file to get a fresh edge, it will be uniformly sharp. If you use a smaller file, only some of the new surface will be fresh and the rest dull.

Prices include VAT

 


Grobet Triangular Saw Files

Quantity:  


Saw File:4in. Double extra slim taper 15-20 Ppi TF-4XXST 6.94
Saw File:5in. Double extra slim taper 12-14Ppi TF-5XXST 7.04
Saw File:6in. Double extra-slim taper 11 Ppi TF-6XXST 7.09
Saw File:6in. Extra-slim taper 9-10 Ppi TF-6XST 6.59
Saw File:6in. Slim taper 8 Ppi TF-6ST 5.48
Saw File:7in. Regular taper 4-5½ Ppi TF-7RT 6.28



Veritas Saw File Holder
Ref: 05G4601


Not only does this guide provide a secondary grip for your saw file, it also helps you control the angle of the
file as you sharpen, using the eye’s natural ability to judge parallel and level.

It has a rotating collar for setting a positive or negative rake angle up to 30°, and a 3" wide protractor to set
the fleam (or bevel) angle up to 45° left or right. All you need to do is keep the edge of the protractor parallel
and level to the blade, something easy to do by eye.

Because the angle guide doesn’t limit the movement of the file, you learn to control it manually, gaining the experience needed for freehand sharpening.

The protractor is marked in 5° increments, and the collar has a vernier scale marked in 1° increments. A rubber O-ring inside the collar provides light resistance to the vernier scale to make precision setting straightforward.

Measures 2-5/8" long overall, with an anodized aluminum body, a stainless-steel protractor, and brass thumbscrews for locking the rake and fleam angles.

Made in Canada

Price incl VAT 


Price: 28.82 (Including VAT at 20%)

Veritas Saw File Holder

Quantity:  



Vallorbe Blunt Mill File Second Cut
Ref: LX5670


Vallorbe 2nd cut mill files are used in preparation for saw sharpening, and for squaring the edges of cabinet scrapers prior to sharpening. Can be used in conjunction with Veritas Jointer/Edger. Handles are also available, please see separate listing.
 


Vallorbe Blunt Mill File Second Cut

Quantity:  


10" (250mm x 25mm x 4mm) Cut 2 6.40
8" (200mm x 19mm x 3.5mm) Cut 2 4.80
6" (150mm x 15mm x 2.5mm) Cut 2 4.00



Vallorbe 'Crocodile' File Handles
Ref: ALx10


Antislip plastic file handle with hardened threaded insert. These can be reused time and time again.

#5 Fits 10-12" files. Recommended for:
10" mill file

#4 Fits 6-8" files. Recommended for:
8" mill file
7" regular saw file

#3 Fits 4-6" files. Recommended for:
6" mill file
7" slim and 6" saw files

#2 Fits 4-6" files. Recommended for:
6" slim and 6" x-slim saw files

#1 Fits 4-5" Files. Recommended for:
5" xx-slim saw files

Prices include VAT 


Vallorbe 'Crocodile' File Handles

Quantity:  


Vallorbe AL110 File Handle #1 5.00
Vallorbe AL210 File Handle #2 5.00
Vallorbe AL310 File Handle #3 5.00
Vallorbe AL410 File Handle #4 5.00
Vallorbe AL510 File Handle #5 5.00



Vallorbe 'Condor' File Handles
Ref: ALx60


Precision needle file handle. These can be reused time and time again.

AL260 Condor Handle for Needle Files. Recommended for:
6" xx-slim and 6" x-slim saw files.

AL160 Condor Handle for Needle Files. Recommended for:
4" xx-slim and 5" xx-slim saw files.

Prices include VAT 


Vallorbe 'Condor' File Handles

Quantity:  


Vallorbe AL160 File Handle 8.70
Vallorbe AL260 File Handle 8.70



Veritas Jointer/Edger
Ref: VM0701


This jointer/edger can be used on cabinet scrapers, scraper plane blades, handsaws and ski edges.
It has a 45° jointing capability as well as the standard 90°. The handle has a comfortable, ergonomic shape and the screws are designed so they can be tightened with a small coin.

In the workshop, it is invaluable for jointing scrapers and handsaws; the fence is relieved next to the file to accommodate tooth set. Anodized aluminum with solid brass screws. Use with a 6" or 8" mill file (not included).  


Price: 11.93 (Including VAT at 20%)

Veritas Jointer/Edger

Quantity:  



Somax Saw Tooth Setter Size 1
Ref: TFS250-BLUE


The Somax No. 250 Saw Setter Size 1 are the blue version of these saw setters imported from Japan. These nifty little pliers allow you to put the set back on your saws. Teeth are set usually to each side of the blade (the term for the width of your cut is the kerf) and is how your saw cuts through wood efficiently as it helps clear the blade through your wood. Over time, set can need adding back on the saw.

The setting pliers have a small hammer that will put the set back on your saw tooth when you squeeze the handles together and the tooth is in line with this hammer.

There are numbered settings on this device (these do not equate to what tooth per inch but a reference for you to remember which setting your saw may be).

These are for suitable for saws with greater than 10 teeth per inch.

Unfortunately this item is not currently available. Please call us on 01473 784 983 or email sales@classichandtools.com to be added to our waiting list.

Price includes VAT
 


Price: 24.00 (Including VAT at 20%)

Somax Saw Tooth Setter Size 1



Somax Saw Tooth Setter Size 2
Ref: TFS250-GOLD


The Somax No. 250 Saw Setter Size 2 are the gold version of these saw setters imported from Japan. These nifty little pliers allow you to put the set back on your saws. Teeth are set usually to each side of the blade (the term for the width of your cut is the kerf) and is how your saw cuts through wood efficiently as it helps clear the blade through your wood. Over time, set can need adding back on the saw.

The setting pliers have a small hammer that will put the set back on your saw tooth when you squeeze the handles together and the tooth is in line with this hammer.

There are numbered settings on this device (these do not equate to what tooth per inch but a reference for you to remember which setting your saw may be).

These are for suitable for saws with less than 10 teeth per inch down to around 4 teeth per inch.

Price includes VAT
 


Price: 24.00 (Including VAT at 20%)

Somax Saw Tooth Setter Size 2

Quantity: