Best Selling

Saburrtooth 6mm Cylinder - 1/4'' x 1'' (Smooth End)

Saburrtooth 6mm Cylinder - 1/4'' x 1'' (Smooth End)

15% discount from price shown.

£19.80 inc VAT

view options

Edward Preston Wide Shoulder Plane No.1368 [Vintage]

In full working order, this heavy-duty shoulder plane is supplied with a new Ray Iles iron as the previous owner has exhausted the original cutter (also supplied) 1 ¼” wide and 8 1/4” long. You can read all about Preston Shoulder planes at Preston Tool Reviews website An excellent alternative to the current new offerings by Lie Nielsen, Veritas & Clifton. The mouth...

£135.00 (VAT exempt)

Gyokucho 374 Dozuki 240mm Crosscut + Spare Blade

The Gyokucho 374 Dozuki 240mm Crosscut TPE (rubber) handle with a spare blade.

£53.95 inc VAT

view bundle

Gyokucho Blades for Cast Gardening Saw - Large Teeth

Works with the following Gyokucho Cast 200 saws.............. 5123 Cast 200 Medium Teeth 5223 Cast 200 Fine Teeth 5323 Cast 200 Large (Coarse) Teeth 5523 Cast Gardening 200 Medium Teeth 5623 Cast Gardening 200 Large (Coarse) Teeth 5723 Cast Gardening 200 Curve

£17.50 inc VAT

Saburrtooth 6mm Cylinder - 3/4'' x 1'' - (Smooth End)

Saburrtooth 6mm Cylinder - 3/4'' x 1'' - (Smooth End)

15% discount from price shown.

£22.50 inc VAT

view options

Gyokucho Blades for Cast Gardening Saw - Medium Teeth

Works with the following Gyokucho Cast 200 saws.............. 5123 Cast 200 Medium Teeth 5223 Cast 200 Fine Teeth 5323 Cast 200 Large (Coarse) Teeth 5523 Cast Gardening 200 Medium Teeth 5623 Cast Gardening 200 Large (Coarse) Teeth 5723 Cast Gardening 200 Curve

£17.50 inc VAT

Side Float - Push

Dan Schwank of Red Rose Reproductions contacted Thomas Lie-Nielsen about making their range of discontinued floats. Lie-Nielsen had no plans to re-introduce them so they were supportive in helping Dan getting these back to market. They certainly match the build quality of the original floats by Lie-Nielsen. The Red Rose Reproductions floats come in a variety of sizes for specific uses. Primarily...

£98.00 inc VAT

Gyokucho Blades for Cast Gardening Saw - Curved

Works with the following Gyokucho Cast 200 saws.............. 5123 Cast 200 Medium Teeth 5223 Cast 200 Fine Teeth 5323 Cast 200 Large (Coarse) Teeth 5523 Cast Gardening 200 Medium Teeth 5623 Cast Gardening 200 Large (Coarse) Teeth 5723 Cast Gardening 200 Curve

£17.50 inc VAT

2 good user planes – Jointer & Smoother [Pre-owned]

A very nice Record No.7 (made in England) and a Stanley Bailey 4 ½ - pre-owned These are good quality examples of older planes which have been well cared for. The No.07 has stained beech handles. The Stanley 4 ½ has beech handles. Both have 2 3/8” wide irons with good life left in them (why not upgrade to a Hock iron?) A commission sale.

£165.00 (VAT exempt)

Crown Tools Revolution 10'' Handle Extension

£29.50 inc VAT

Gyokucho Blade for Fugaku Sentei (F745)

Replacement for the Gyokucho #F7453 saw

£18.50 inc VAT

Rob Cosman's Ultimate Chisel Roll

What Rob says .Determined to design a better chisel roll, we created the ultimate chisel roll. Our chisel roll securely holds up to 11 chisels inside with rust-inhibiting material and prevents them from falling out no matter how you carry it. The roll material is made by sandwiching a layer of Vapor Corrosion Inhibitor (VCI) material between a tough outer Cordura nylon layer and an inner cotton...

£115.00 inc VAT

Stanley Double Sided Rebate Plane – No.79 [Vintage]

A very crisp example of this classic little side rebate pane with original parts and good cutter life left. A nice little plane. Made in England. This plane is designed to help with accurately trimming dados, grooves and mouldings. The body houses two skew cutters set at a very low angle. 5 ½” overall. It also has a reversible nose for each side to allow for closer corner...

£75.00 (VAT exempt)

Flexcut 90-degree V-Tool (90°) - 5/8'' (15mm) SK706

The Flexcut SK706 90-degree V-Tool is an interchangeable blade used for wood carving. It has a 90° V-shaped edge and is 5/8'' (15mm) wide. This unhandled V-tool is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving. Flexcut V-tools come in various angles:...

£19.65 inc VAT

Gyokucho Fugaku Edauchi Gardening Saw with 300mm curved blade

Gyokucho Fugaku Edauchi Gardening Saw with 300mm curved blade

This saw has a taper ground blade with no set; this reduces the amount of friction and helps prevent binding which reduces the amount of effort required for each pull stroke. Perhaps more importantly, the clean cut will help the tree regenerate quicker. Comes with a useful sheath/guard which can be hung from a belt.

£49.00 inc VAT

Norris No.13 Smoothing Plane [Vintage]

Steel soled Norris smoothing plane with pinned parallel patent metal sides and attractive rosewood infill. Alex Mathieson & Son iron ( 1 ½” remaining at least) and matching cap iron. The lever cap is stamped Norris London. This was once owned by an A Kirkland, whose name is on the rosewood, AK initials on the plane bed and quite discreetly dotted on one of the steel sides. The...

£445.00 (VAT exempt)

Pocket Boy Medium Teeth Saw - Replacement Blades

The Silky Saws Pocketboy range of folding saws is an extremely popular, high quality gardening and leisure product. Its compact, lightweight design meaning it fits neatly into your pocket or rucksack. Ideal for light pruning around the garden, including fruit and small ornamental trees. It is also popular with campers and those enjoying the great outdoors. This sleek saw features a rust-resistant,...

from £21.50 inc VAT

view options

Replacement Blade for Clifton No. 420 Shoulder Plane

This Replacement Blade is designed specifically for the Clifton No. 420 Shoulder Rebate Plane. Made in Sheffield, UK, the blade is ¾" (19mm) wide and is crafted from high-quality steel to ensure precision and durability. It is an essential component for maintaining the sharpness and effectiveness of your Clifton shoulder plane, ensuring clean, precise cuts every time.

£33.00 inc VAT

Gyokuch Blade for Fugaku Edauchi Curved (F7763)

Replacement for the Gyokucho #F7763 saw

£18.50 inc VAT

Tormek Accessory Bundle [Pre-owned]

10 Tormek goodies – all pre-owned, all in original packaging, most with printed instructions and all used quite sparingly. Please refer to our Tormek page for more detailed descriptions including excellent videos. This lot would set you back about £500 new. SG-200 - The Tormek Original Grindstone SG-200 is the smaller version of the SG-250 grindstone and has the same composition...

£300.00 inc VAT

Crown Tools Revolution Brass Clamp Kit

Crown Tools Revolution Brass Clamp Kit includes Extender and two Long Hollower (REV16) blades.

£33.60 inc VAT

Rob Cosman's VCI Saw Case:
Small Size

What Rob says Protect your premium backsaws from damage and corrosion during storage or transportation with our custom-made VCI (Vapor Corrosion Inhibitor) saw cases. Our small-sized saw cases are specifically designed for our 3/4 Rob Cosman Dovetail and Joinery Crosscut backsaws with pistol grips, but this case will accommodate similar backsaws as long as the maximum saw dimensions are not exceeded...

£43.50 inc VAT

Crown Tools Revolution Carbide Cutter (8mm) incl Extender & Key

£45.95 inc VAT

Flexcut Back Bent Gouges SK754

The Flexcut Back Bent Gouges are interchangeable blades used for wood carving. This unhandled back bent gouge is compatible with the SK100 Quick Connect ABS Handle, SK102 Quick Connect Palm Handle, SK103 Quick Connect Long Handle for carving by hand; and the SK109 Universal Adapter for power carving.

£21.37 inc VAT

Gyokucho Replacement Blade & Tip for Pruning Shears (TS179)

£15.00 inc VAT

Pair of Lie-Nielsen Drawbore Pins [Pre-owned]

Pair of Lie-Nielsen Drawbore Pins [Pre-owned]

Drawboring is a great way to make a strong mechanical joint. A wooden pin is hammered through slightly offset holes in the two pieces, and pulls the joint together. You use Drawbore Pins to pull the joint together first (with some force and a twisting motion). This eases the edges of the hole, making driving the wood pin easier. You can also disassemble the joint if you want to work on the fit some...

£120.00 (VAT exempt)

Gyokucho Replacement Lower Anvil for Pruning Shears (TS179)

£7.00 inc VAT

Flexcut Thumbnail Ground Set FR920

These very deep gouges are designed with a parabolic curve. They are designed to be rolled up to 90 degrees and change shape from a deep #11 to a smooth #3 in one continuous cut. The thumbnail grind keeps the corners from digging into the wood as the tool is rolled. Palm Tools included: FR725 #11X x 3/16', FR925 #11X x 5/16', FR926 #11X x 3/8', FR927 #11X x 1/2'.

£88.99 inc VAT

Norris No.20E Shoulder Plane [Rare, Vintage]

This plane has been professionally restored although you wouldn't know this unless we told you as the restoration is perfectly done. The steel soled mouth is tight and true. Gunmetal body with lovely ebony infil and wedge. A very nice shoulder plane which bears the dings and marks of use. There is little left of the original Norris blade (clearly stamped with Norris London) hence the...

£395.00 inc VAT

Crown Tools Revolution Key Cutter

Crown Tools Revolution Key Cutter available in long and short.

from £17.35 inc VAT

view options

Crown Tools Revolution Replacement Blades for Long Hollower

Set of 2 Long Hollower blades for the Crown Tools Revolution Hollowing System

£26.30 inc VAT

Veritas Low Angle Bevel Up Smoothing Plane (with 2x A2 blades) [Pre-owned]

This is Veritas’ state-of-the-art pure smoothing plane. It is the plane to use for the final finish on surfaces, especially woods of difficult grain patterns. It also complements the low-angle jack plane. Veritas have combined the generous width and weight of a dedicated smoother with the versatile inner workings of a low-angle bevel-up plane. The plane has a 12° bed angle, and this...

£225.00 (VAT exempt)

Crown Tools Revolution Replacement Brass Cutter Holder

Brass Cutter Holder for use with Revolution Hollowing System

£22.90 inc VAT

Japanese Marking & Layout Tool Bundle [Pre-owned]

Japanese Marking & Layout Tool Bundle [Pre-owned]

White oak marking gauge with matching double marking (mortise) gauge, a small awl, a marking knife and a wooden hammer. 5 separate tools all in G++ condition.

£65.00 inc VAT

Crown Tools Revolution Scrapers

£45.25 inc VAT

Crown Tools Revolution Shaft 1/2''

Crown Tools Revolution 1/2'' shaft only

£34.30 inc VAT

Henry Taylor Woodcarving Punch - Medallion 1

Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.

£9.60 inc VAT

Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]

Stanley No.80 Cabinet Scraper (with a Hock Replacement Blade) [Pre-owned]

A recent, used Stanley No.80 Scraper plane with a new Hock replacement iron. The plane is in good order with 100% black japanning and a flat sole for the 2 3/8” sole.

£60.00 inc VAT

Crown Tools Revolution Shaped Cutters

Crown Tools Revolution Shaped Cutters available as an egg and pear shapes.

from £17.35 inc VAT

view options

Henry Taylor Woodcarving Punch - Medallion 2

Woodcarvers Punches from Henry Taylor which are made here in the UK. They are approximately 75mm (3'') in length and approximately 5mm wide.

£9.60 inc VAT

Crown Tools Revolution Spiralling Wheel

Crown Tools Revolution Spiralling Wheel available in 18 and 30 tooth.

from £26.25 inc VAT

view options

Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]

Woodworking Gauge - RICHARD BATES of BLOOMSBURG, USA [Rare, Vintage]

Despite many years of handling various gauges, we hadn’t seen this particular gauge before so we enjoyed playing with the adjustable tilting head. The clear patent dates on the reverse of the fence led us to the maker BATES of BLOOMSBURG OCT 20 1896, USA Link to patent source notes Directory of American Tool and Machinery Patents Jim Bode sold one of these in the not-too-distant...

£75.00 (VAT exempt)

Tissington Smoothing Plane [Vintage, Rare]

Tissington Smoothing Plane [Vintage, Rare]

Please note: you may only have a maximum of 30 minutes to complete checkout with this Friday Finds item once you have placed it in your basket. Thank you.

£265.00 inc VAT

Crown Tools Revolution Swan Neck and Egg Scraper

A 12'' Swan Neck for use with Revolution Hollowing Sytem supplied with Egg Scraper (REV13), 1/2'' diamter shaft.

£45.50 inc VAT

Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]

Lie-Nielsen Toolworks – Right Hand Skew Block Plane – LN 140 Bronze [Pre-owned]

This plane is a little bit rare these days!

£425.00 inc VAT

Crown Tools Revolution Texturing Tool

The Crown Tools Revolution Texturing Tool fits directly into the 1/2'' (13mm) collet of the Revolution Handle and is supplied with a 18 tooth texturing wheel. The blade has an indexing line scribed down the centre to allow the use of Crown Tools Indexing Tool. Adding the Indexing Tool with the appropriate Spiralling Wheels available offers full spiralling capabilities.

£77.75 inc VAT

Crown Tools Revolution Texturing Wheel

18 Tooth texturing wheel, wheels are approx 37mm diameter with 8mm central hole.

£28.75 inc VAT

Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]

Stone Masons Firesharp Toothed Chisels – 11 widths [Clearance]

11 Toothed Chisels: 10mm wide 3 pointed teeth 15mm wide 4 pointed teeth 20mm wide 5 pointed teeth 25mm wide 6 pointed teeth 30mm wide 7 pointed teeth 35mm wide 8 pointed teeth 40mm wide 9 pointed teeth 45mm wide 10 pointed teeth 50mm wide - 11 pointed teeth 55mm wide - 11 pointed teeth 60mm wide - 13 pointed teeth 270mm overall length. New old stock. Be advised...

£320.00 inc VAT

Category

Brand

Collection

Price

Additional Filters

Sort By

Per Page

View