Tormek AWT-250 Advanced Water TroughTormek AWT-250 Advanced Water Trough
Tormek AWT-250 Advanced Water Trough
The Tormek Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools. Magnet Cleans the Stone The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone...
£29.00 inc VAT
Tormek LA-120 Jig Shaft
Tormek LA-120 Jig Shaft
Replacement shaft for the LA-120 Profiled Honing Wheel

5

£12.00 inc VAT

Tormek LA-124 Set of Optional Narrow DiscsTormek LA-124 Set of Optional Narrow Discs
Tormek LA-124 Set of Optional Narrow Discs
For use with the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2mm (3/32") radius and one with a 45° tip. These smaller disc profiles permit the honing of small carving tools with very narrow profiles.
£35.75 inc VAT
Tormek LA-220 Leather Honing Wheel
Tormek LA-220 Leather Honing Wheel
Gently removes the burr which develops during grinding and polishes the bevel. Fits Tormek T-8, Tormek T-7 and Tormek 2000. It is used together with Tormek Honing Compound PA-70. To get the highest possible sharpness on your edge tool, you finish the sharpening process by honing your tool on the Leather Honing Wheel. The leather on the Leather Honing Wheel is provided by the tannery Tärnsjö...
£71.50 inc VAT

Tormek Leather Profiled Honing Wheel
Tormek Leather Profiled Honing Wheel
With the profiled Tormek leather honing wheels LA-120 you can hone and polish the inside of turning gouges, carving gouges and V-tools. Fits all Tormek models. You mount the extra wheels on the outer side of the standard honing wheel. LA-120 is delivered with two standard discs. The first has a radius of 3mm (1/8") for gouges and the second has a 60° tip for v-tools. It is used...
£55.00 inc VAT
Tormek MSK-200 Stainless Steel Shaft for T3/T4
Tormek MSK-200 Stainless Steel Shaft for T3/T4
Tormek Stainless steel main shaft with Ezylock nut in composite. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone. With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation...
£38.00 inc VAT

Tormek MSK-250 Stainless Steel Shaft for T7/T8
Tormek MSK-250 Stainless Steel Shaft for T7/T8
The Tormek MSK-250 stainless steel shaft, washer and EzyLock nut are all made of stainless steel. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone. With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left...
£39.00 inc VAT
Tormek RB-180 Rotating Base
Tormek RB-180 Rotating Base
The Tormek RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds. Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the Tormek Rotating Base RB-180, you can easily...
£48.50 inc VAT

Tormek US-105 Universal Support with Micro Adjust
Tormek US-105 Universal Support with Micro Adjust
The Tormek Universal Support is the basis for all Tormek jigs. US-105 has a square cut Acme style thread which prevents damage by the locking screws and a Micro Adjust with scale for precise setting of the edge angle and cutting depth. Fits Tormek T-8, Tormek T-7 and Tormek 2000. The versatile Tormek Universal Support is the basis of the Tormek system. It is made of 12mm (approx. ½")...
£39.50 inc VAT
Tormek US-430 Extended Universal Support with Micro Adjust
Tormek US-430 Extended Universal Support with Micro Adjust
The Tormek Extended Universal Support for sharpening long tools, such as long knives, cleavers and machetes. Micro adjust with scale for precise setting of edge angle and cutting depth. Fits Tormek T-8, Tormek T-7 and Tormek 2000. Length: 436mm. Height: 212mm. Can be placed in these positions: - Vertically for sharpening towards the edge. - Horizontally for sharpening with the edge. -...
£80.50 inc VAT

Tormek XB-100 Horizontal Base
Tormek XB-100 Horizontal Base
The Tormek XB-100 Horizontal Base is an upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.
£26.95 inc VAT