Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

 

Secure Online Shopping



Tormek Square Edge Jig
Ref: T-SE77


With the SE-77 Square Edge Jig, it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.

The SE-77 Square Edge Jig is a further development of the SE-76 jig. It has been provided with an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the stone, is very narrow or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other.

The jig's construction also makes it possible to position and sharpen tapered chisels, e.g. Japanese chisels. The safety stops keep the jig securely on the Universal Support and prevent the tool from sliding off the grindstone, so there is no risk that you will hurt your fingers when sharpening. The jig fits wood chisels and plane irons up to 77 mm (3") width.

Sharpening a convex shape
Most types of plane irons can benefit from a slight convex shape. The degree of camber depends on the type of plane and should be approximately the same as the thickness of the shavings. Thanks to the adjustable side on the SE-77 jig, you can achieve the optimal convex shape for your tool.

Click here for instructions

Price incl VAT 


Price: 41.09 (Including VAT at 20%)

Tormek Square Edge Jig

Tormek Square Edge Jig

Quantity:  



Tormek Planer/Jointer Blade Jig
Ref: T-SVH320


With the Tormek Planer Blade Attachment SVH-320 you can sharpen HSS planer blades of any length. Also suitable for mitre guillotine blades.

With this jig you will always work with sharp planer blades. You do not need to interrupt your work to send them away for sharpening.

The jig copes with planer blades of any length. Blades longer than 270 mm (10½") are relocated in the blade holder and ground in two steps.

The tool is guided precisely and ground flat along its whole length to a pre-set fixed depth. This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding. It is important that the grinding angle is set with great accuracy. Follow the detailed step by step instructions carefully.

Click here for instructions

Prices include VAT 


Price: 129.88 (Including VAT at 20%)

Tormek Planer/Jointer Blade Jig

Tormek Planer/Jointer Blade Jig

Quantity:  



Tormek Knife Profile Jig
Ref: T-SVP80


The Tormek Moulding Knife Jig SVP-80 sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between the hole-centres.

Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile. Max width 100 mm. Also for profiled paint removal blades.

Click here for instructions

Prices include VAT 


Price: 108.76 (Including VAT at 20%)

Tormek Knife Profile Jig

Tormek Knife Profile Jig

Quantity:  



Tormek Jig for Gouges/Turning Cutters
Ref: T-SVD186


With the Tormek gouge jig SVD-186 you can easily sharpen your fingernail shaped woodturning gouges to a razor sharpness. The high level of control enables you to exactly replicate your chosen profile.

With this gouge sharpening jig you can also sharpen woodcarving tools with complex shapes such as curved or bent carving gouges and V-tools.

Click here for instructions

Prices include VAT 


Price: 60.59 (Including VAT at 20%)

Tormek Jig for Gouges/Turning Cutters

Tormek Jig for Gouges/Turning Cutters

Quantity:  



Tormek Multi Jig
Ref: T-SVS50


It is not without reason this jig is named "Multi Jig". It consists of a housing and two interchangeable seats for different types of tools, the open seat and the closed seat, which really makes it two jigs in one.

With SVS-50 you can sharpen square and skew turning chisels with straight or curved edges as well as parting tools, roughing gouges and gouges and chisels for woodcarving.

Click here for instructions

Prices include VAT 


Price: 43.10 (Including VAT at 20%)

Tormek Multi Jig

Tormek Multi Jig

Quantity:  



Tormek Woodcarving/Short Tool Jig
Ref: T-SVS38


This little jig is designed for sharpening short woodcarving tools and the shortest chisels. Suitable for straight shanked tools, such as wood chisels, carving gouges and tools for power carvers.

The jig has two parallel flanges running on both sides of the Universal Support which ensures that the jig at all times – even when rotated – holds the tool square to the grindstone.

This is a great advantage, as you can continuously concentrate on how the edge touches the grindstone or the honing wheel without having to worry whether the jig is square to the stone.

Min length of tool 45 mm (1¾") at 20° edge angle.

Click here for instructions

Prices include VAT
 


Price: 17.65 (Including VAT at 20%)

Tormek Woodcarving/Short Tool Jig

Tormek Woodcarving/Short Tool Jig

Quantity:  



Tormek Adjustable Tool Rest
Ref: T-SVD110


With the Tool Rest you get an extended support surface from the Universal Support. It is ideal for sharpening turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. You can also use it for cabinet scrapers and hollowing tools.

It has a generous surface, 90×110 mm, which permits a safe and steady positioning of the tool towards the stone.

The bore is made with a special wedge shape, which increases the locking force by 250 %. You can lock the Tool Rest instantly at the chosen angle. This unique design is patented by Tormek.

Click here for instructions

Prices include VAT
 


Price: 22.15 (Including VAT at 20%)

Tormek Adjustable Tool Rest

Tormek Adjustable Tool Rest

Quantity:  



Tormek Axe Jig
Ref: T-SVA170


With the Tormek Axe Jig SVA-170 you will be surprised to see how sharp you can get an axe. The jig firmly supports the axe, and enable you to sharpen it with a constant edge angle.

Click here for instructions

Prices include VAT 


Price: 9.65 (Including VAT at 20%)

Tormek Axe Jig

Tormek Axe Jig

Quantity:  



Tormek Knife Jig
Ref: T-SVM45


The Tormek Knife Jig SVM-45 is suitable for sharpening all kinds of knives; household knives, chef’s knives, craft knives and knives for hunting and fishing. You can also sharpen carver’s drawknives.

Since the jig rests freely on the Universal Support you can follow the curve of the blade.

The Universal Support is normally placed vertically for knife sharpening towards the edge. Short knives can also be ground away from the edge with the Universal Support placed horizontally.

Min. blade length 60 mm (2 3/8"). For smaller knives, see SVM-00.

Click here for instructions

Prices include VAT 


Price: 25.00 (Including VAT at 20%)

Tormek Knife Jig

Tormek Knife Jig

Quantity:  



Tormek Small Knife Holder
Ref: T-SVM00


The Small Knife Holder SVM-00 from Tormek opens up the possibility to sharpen those really small knife blades, which up until now have been difficult to sharpen.

Normally small knives have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.

The holder works together with the Tormek Knife Jig SVM-45.

You can sharpen knives of different shapes for whittling, chip carving and detail work, even folding pocket knives can be sharpened with perfect control.

Since it is the handle of the knife that is mounted in the SVM-00 holder, there is really no limit to how small a blade you can sharpen.

Click here for instructions

Price incl VAT 


Price: 23.51 (Including VAT at 20%)

Tormek Small Knife Holder

Tormek Small Knife Holder

Quantity:  



Tormek Long Knife Jig
Ref: T-SVM140


The Tormek Long Knife Jig SVM-140 has been developed especially for the sharpening of long and flexible knives, like filleting knives.

This jig works in the same way as the Knife Jig SVM-45 but is wider. Its larger width, 140 mm, stabilizes a long and thin blade and gives more support. Of course it can also be used for larger knives with a more stable knife blade like chef's knives.

The jig rests on the Universal Support. The exact edge angle is set by rotating the adjustable stop or with the Micro Adjust on the Universal Support.

The Universal Support is placed vertically for grinding towards the edge.

Click here for instructions

Prices include VAT 


Price: 36.85 (Including VAT at 20%)

Tormek Long Knife Jig

Tormek Long Knife Jig

Quantity:  



Tormek Scissors Jig
Ref: T-SVX150


Give your scissors a bite on the Tormek with the SVX-150 jig for scissors. It fits all sorts of scissors from household scissors to heavy garden shears. You can also sharpen pinking scissors that make zigzag cuts in cloth as well as portable electrical hand planer blades.

The scissors are mounted in a holder, which supports freely on a support plate. The grinding angle can be set so that you exactly replicate the existing edge angle.

One of the scissor blades, sometimes both of them, often have a slight convex shape. With the Tormek jig design, you follow the individual shape of each blade so that the sharpening runs smoothly.

The rotation of the stone presses the scissor blade towards the support plate, so you can concentrate on moving the scissors across the stone.

Click here for instructions

Prices include VAT 


Price: 31.60 (Including VAT at 20%)

Tormek Scissors Jig

Tormek Scissors Jig

Quantity:  



Tormek Drill Bit Sharpener
Ref: T-DBS22


With the Tormek Drill Bits Sharpening Attachment DBS-22 you can now sharpen your drill bits (3-22 mm) with the highest precision. The optimal point can be set according to each drilling requirement, which depends upon the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.

Click here for instructions

Price incl VAT 


Price: 187.91 (Including VAT at 20%)

Tormek Drill Bit Sharpener

Tormek Drill Bit Sharpener

Quantity:  


 

 
Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement

© Classic Hand Tools Ltd | Company Registration No. 04764498 | VAT No. GB 818 111 455