Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

 

Secure Online Shopping


Online Catalogue >  Shop by Manufacturer  >  Manufacturers N-Z  >  Tormek  >  Tormek Upgrades & Spare Parts


Tormek XB-100 Horizontal Base
Ref: T-XB-100


Upgrade for earlier Tormek machine models. With the Horizontal Base you can move the Universal Support from vertical mount (for grinding towards the edge) to horizontal mount for grinding away from edge.

Click here for instructions

Price incl VAT 


Price: 15.16 (Including VAT at 20%)

Tormek XB-100 Horizontal Base

Tormek XB-100 Horizontal Base

Quantity:  



Tormek MSK-200 Stainless Steel Shaft for T3/T4
Ref: T-MSK-200


Stainless steel main shaft with Ezylock nut in composite. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.

With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.

When mounting the grindstone, turn by hand the Ezylock nut anticlockwise into position. It will automatically tighten to the right torque during the first sharpening.

If you need to change stone, turn the stone clockwise while fixating the leather honing wheel with the other hand and the EzyLock will easily loosen.

This construction makes it easy to work with different grindstones and you can change to the Japanese Waterstone SJ-200 for an extra fine finish.

Fits Tormek T-4, Tormek T-3 and older models with 200 mm (8") stone diameter.

Prices incl VAT 


Price: 48.41 (Including VAT at 20%)

Tormek MSK-200 Stainless Steel Shaft for T3/T4

Tormek MSK-200 Stainless Steel Shaft for T3/T4

Quantity:  



Tormek MSK-250 Stainless Steel Shaft for T7/T8
Ref: T-MSK-250


The shaft, washer and EzyLock nut are all made of stainless steel. The EzyLock ensures that the grindstone is held securely with no danger of unwinding. Unique design requires no tools to mount or loosen the grindstone.

With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.

When mounting the grindstone, turn by hand the Ezylock nut anticlockwise into position. It will automatically tighten to the right torque during the first sharpening.

If you need to change stone, turn the stone clockwise while fixating the leather honing wheel with the other hand and the EzyLock will easily loosen.

This construction makes it easy to work with different grindstones, from the Tormek Original Grindstone to the specialty stones Blackstone Silicon for High Speed Steel and the 4000 Grit Japanese Waterstone.

Fits Tormek T-8, Tormek T-7, Tormek 2000 and all older models with 250 mm stone diameter.

Prices incl VAT 


Price: 53.16 (Including VAT at 20%)

Tormek MSK-250 Stainless Steel Shaft for T7/T8

Quantity:  



Tormek LA-124 Set of Optional Narrow Discs
Ref: T-LA-124


For the Tormek Profiled Leather Honing Wheel LA-120. Includes two discs, one with a 2 mm (3/32") radius and one with a 45° tip.

Price incl VAT. 


Price: 24.54 (Including VAT at 20%)

Tormek LA-124 Set of Optional Narrow Discs

Tormek LA-124 Set of Optional Narrow DiscsTormek LA-124 Set of Optional Narrow Discs

Quantity:  



Tormek AWT-250 Advanced Water Trough
Ref: T-AWT-250


The Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. It also includes an embedded magnet to collect steel particles and a removable water chute for long tools.

Magnet Cleans the Stone
The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone clean and cutting more freely.

These small steel particles are otherwise pressed into the stone surface and can disturb the sharpening. When cleaning the water trough, you’ll find that most of the steel will be located right on the magnet. It can be wiped off the water trough with a paper towel or rag.

Water Chute for Long Tools
For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), just add the water chute. It attaches easily and directs the water back into the trough.

Tilt Shoes Control the Water Flow
Two Tilt Shoes are supplied with the AWT-250. You can use them to raise the honing wheel side of the machine so the water follows the tool towards the outside of the stone and runs back into the water trough.

You minimize the water dripping onto the housing. This is an advantage especially when sharpening wide tools. When not required they can be stored magnetically under the machine.

Fits Tormek T-7, Tormek 2000 and older models with 250 mm stone diameter.

Price incl VAT. 


Price: 17.46 (Including VAT at 20%)

Tormek AWT-250 Advanced Water Trough

Tormek AWT-250 Advanced Water TroughTormek AWT-250 Advanced Water Trough

Quantity:  



Universal Support with Micro Adjust
Ref: T-SUS105


Makes sharpening even easier!

Prices include VAT 


Price: 31.62 (Including VAT at 20%)

Universal Support with Micro Adjust

Quantity:  



Tormek RB-180 Rotating Base
Ref: T-RB-180


The RB-180 enables you to easily rotate the machine 180° and lock it with complete stability. You can alternate between sharpening and honing, or sharpening towards or away from the edge in seconds.

Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the Tormek Rotating Base RB-180, you can easily rotate the machine 180° to select the ideal sharpening direction.

The Rotating Base also makes it easy to switch from sharpening to honing. Honing is always carried out with the honing wheel running away from the edge, otherwise the tool will cut into the leather.

The RB-180 is constructed from three optimal high performance materials to ensure a low friction and high stability. It automatically locks in position.

A priority during the design process has been to make the RB-180 as thin as possible in order not to affect the working height. You easily turn the machine without any heavy lifting or water spillage.

The rubber feet absorb the normal vibrations and make sure that it rests firmly on the table. The RB-180 will fit Tormek T-8, Tormek T-7, Tormek T-4, T-3, the 2000 and 1200 Series, plus the SA-250 and N-1500.

Price incl VAT 


Price: 39.04 (Including VAT at 20%)

Tormek RB-180 Rotating Base

Tormek RB-180 Rotating Base

Quantity:  


 

Online Catalogue >  Shop by Manufacturer  >  Manufacturers N-Z  >  Tormek  >  Tormek Upgrades & Spare Parts

 
Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement

© Classic Hand Tools Ltd | Company Registration No. 04764498 | VAT No. GB 818 111 455