Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

   
 

Secure Online Shopping



Robert Sorby Patriot Chuck & Accessories


These are British made chucks and accessories made in Sheffield, England. Robert Sorby have a wealth of experience in all matters woodturning so expect the best from them.

Robert Sorby Patriot Chuck
Ref: RSPC


The Patriot lathe chuck was developed by Robert Sorby after many years of experience in selling, marketing and distributing another chuck. Hence the design incorporates all the key features which turners look for in a scroll chuck:

- compact design which does not strain lathe bearings yet is ideal for all sizes of project
- inserted system so there is a size to fit almost every lathe
- all jaws are perfectly matched so there is no need for tiresome number matching
- the single key operation with positive location requires only the lightest of touches
- key is articulated to allow access behind large projects
- true compression angles on drive and driven gear ensure smooth operation every time
- jaws stops prevent slides from working loose
- wide selection of useful jaws give additional versatility
- jaws dovetailed on inside and outside face
- additional serrated teeth on jaws give extra grip (see below)
- enclosed back protects gearing against dust
- backplate is removable for easy maintenance and cleaning
- comes complete with 2" jaws and woodscrew
- English instruction manual supplied

Please make sure that you select the correct thread from the list below.

These chucks are all made in Sheffield, England

Prices incl VAT 


Robert Sorby Patriot Chuck

Quantity:  


Robert Sorby Patriot Chuck RSPC 1 1/2" x 6 - ADAPTOR  189.70
Robert Sorby Patriot Chuck RSPC 1 1/2" x 6 - DIRECT THREAD  189.70
Robert Sorby Patriot Chuck RSPC 1 1/4" x 8  189.70
Robert Sorby Patriot Chuck RSPC 1 1/8" x 12  189.70
Robert Sorby Patriot Chuck RSPC 1" x 10  189.70
Robert Sorby Patriot Chuck RSPC 1" x 10 Left Handed  189.70
Robert Sorby Patriot Chuck RSPC 1" x 12  189.70
Robert Sorby Patriot Chuck RSPC 1" x 8  189.70
Robert Sorby Patriot Chuck RSPC 18mm x 2.5  189.70
Robert Sorby Patriot Chuck RSPC 20mm x 1.5  189.70
Robert Sorby Patriot Chuck RSPC 20mm x 2  189.70
Robert Sorby Patriot Chuck RSPC 24mm x 3  189.70
Robert Sorby Patriot Chuck RSPC 25mm x 2  189.70
Robert Sorby Patriot Chuck RSPC 3/4" x 10  189.70
Robert Sorby Patriot Chuck RSPC 3/4" x 16  189.70
Robert Sorby Patriot Chuck RSPC 30mm x 3.5  189.70
Robert Sorby Patriot Chuck RSPC 30mm x 1.5  189.70
Robert Sorby Patriot Chuck RSPC 33mm x 3.5 - ADAPTOR  189.70
Robert Sorby Patriot Chuck RSPC 33mm x 3.5 - DIRECT THREAD  189.70
Robert Sorby Patriot Chuck RSPC 5/8" Plain Bore  189.70
Robert Sorby Patriot Chuck RSPC 7/8" x 12  189.70
Robert Sorby Patriot Chuck RSPC 7/8" x 12 Left Handed  189.70
Robert Sorby Patriot Chuck RSPC 7/8" x 16  189.70



Robert Sorby Zero Jaws
Ref: RSJZ


These innovative jaws allow the turning of extremely fine, detailed pieces like lace bobbins as they close right down. The unique dome shape enables the turner to work close to his project. At the same time the dome can be used for internal gripping of larger projects without the fear of marking.

The photo shows the Zero Jaws fitted to a Patriot Chuck (not included).

Prices incl VAT 


Price: 65.54 (Including VAT at 20%)

Robert Sorby Zero Jaws

Quantity:  



Robert Sorby Wobble Chuck
Ref: RSWC


The Wobble Chuck is an inexpensive introduction to off-centre or eccentric turning, the Wobble Chuck fits in the standard 2" jaws of the Patriot chuck in the same manner as a faceplate ring. The workpiece can be held by three screws - like a faceplate - or by a single wood screw - like a screw chuck - or by both means. It is then off-set by rotating the upper section of the Wobble Chuck. Ideal for goblets with off-set stems. A great opportunity to experiment with novel projects.

The photo shows the Wobble Chuck fitted to a Patriot Chuck (not included).

Prices incl VAT 


Price: 72.04 (Including VAT at 20%)

Robert Sorby Wobble Chuck

Quantity:  



Robert Sorby RSJ1 Jaws - 1" (25mm)
Ref: RSJ1


1" Jaws. With a fine internal and external dovetail, these 1" jaws are perfect for gripping miniature projects. The jaws expand from 25mm to 50mm and compress from 39mm down to 14mm.

Also compatible with Nova and Supernova chucks.

The photo shows the RSJ1 Jaws fitted to a Patriot Chuck (not included).

Prices incl VAT 


Price: 41.30 (Including VAT at 20%)

Robert Sorby RSJ1 Jaws - 1

Quantity:  



Robert Sorby RSJ15 Jaws 1 3/8" (35mm)
Ref: RSJ15


1 3/8" Jaws. Designed for smaller projects like boxes and bowls up to 6".

The photo shows the RSJ15 Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 45.31 (Including VAT at 20%)

Robert Sorby RSJ15 Jaws 1 3/8

Quantity:  



Robert Sorby RSJ3 Jaws 2 3/4" (70mm)
Ref: RSJ3


2 3/4" Jaws. For larger projects and bowls up to 13" where a little extra grip is required.

The photo shows the RSJ3 Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 60.78 (Including VAT at 20%)

Robert Sorby RSJ3 Jaws 2 3/4

Quantity:  



Robert Sorby RSJ4 Jaws 3 1/2" (89mm)
Ref: RSJ4


3 1/2" Jaws. Intended for bowls up to 16" needing substantial holding power.

The photo shows the RSJ4 Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 63.34 (Including VAT at 20%)

Robert Sorby RSJ4 Jaws 3 1/2

Quantity:  



Robert Sorby RSJ5 Jaws 4 ¼" (108mm)
Ref: RSJ5


4¼" Jaws. These jaws enable a much bigger recess or spigot to be held and are hence designed for bowls and platters over 16".

The photo shows the RSJ5 Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 66.11 (Including VAT at 20%)

Robert Sorby RSJ5 Jaws 4

Quantity:  



Robert Sorby RSJDG Deep Grip Jaws
Ref: RSJDG


Deep Grip Jaws.The deep sides of these jaws make them ideal for large logs or awkward pieces of wood. They come with both internal and external dovetails to hold cumbersome pieces securely.

The photo shows the RSJDG Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 66.01 (Including VAT at 20%)

Robert Sorby RSJDG Deep Grip Jaws

Quantity:  



Robert Sorby Pin Jaws 1" (25mm)
Ref: RSJP


1" Pin Jaws. The extra length of these jaws makes them suitable for awkward pieces of wood like burrs. Dovetailed on the inside and outside they are ideal for small projects or tall turned items like pepper-mills.

The photo shows the Pin Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 55.06 (Including VAT at 20%)

Robert Sorby Pin Jaws 1

Quantity:  



Robert Sorby Long Nose Jaws
Ref: RSJLN


Long Nose Jaws.These jaws have a reach of 4" allowing bowls to be remounted internally. The shape of the jaws allows easy access to the back of the project. Dovetailed internally and externally for extra versatility.

The photo shows the Long Nose Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 78.41 (Including VAT at 20%)

Robert Sorby Long Nose Jaws

Quantity:  



Robert Sorby Custom Jaws
Ref: RSJC


Custom Jaws made from high quality nylon, these jaws can to shaped using regular turning tools to create a shape to meet the needs of a specific project.

The photo shows the Custom Jaws fitted to a Patriot Chuck (not included).

Price incl VAT
 


Price: 27.46 (Including VAT at 20%)

Robert Sorby Custom Jaws

Quantity:  



Robert Sorby Bowl Reversing Jaws
Ref: RSJBR


Bowl Reversing Jaws. Designed for finishing the outside and foot of a bowl. Lightweight, but extremely strong solid aluminium construction with 10 different location points to hold a variety of sizes of bowl. Rubber grips hold the project in place without causing damage.Maximum bowl diameter 9". 10" capacity over bed bars.

The photo shows the Bowl Reversing Jaws fitted to a Patriot Chuck (not included).

Price incl VAT 


Price: 72.38 (Including VAT at 20%)

Robert Sorby Bowl Reversing Jaws

Quantity:  



Robert Sorby Steb Drive
Ref: RS-STBCH


Using the same principles as the original patented Stebcentre the Steb Drive conveniently fits in the jaws of a Patriot chuck. Its serrated teeth and spring-loaded centre pin create an unparalleled grip on wood.

Price incl VAT 


Robert Sorby Steb Drive

Quantity:  


Robert Sorby Steb Drive 1/2"  45.67
Robert Sorby Steb Drive 7/8"  45.67
Robert Sorby Steb Drive 1¼"  53.29


 

 
Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement

© Classic Hand Tools Ltd | Company Registration No. 04764498 | VAT No. GB 818 111 455