Lie-Nielsen No.60 1/2 Block PlaneLie-Nielsen No.60 1/2 Block Plane
Back In Stock
Lie-Nielsen No.60 1/2 Block Plane
The Lie-Nielsen No 60½ Block Plane is based upon the old Stanley No 60½. This is a superb little block plane and should be in your tool kit, useful for all woodworking jobs in particular great for trimming end grain. The movable shoe in front of the blade allows you to easily adjust the mouth opening - fine mouth for finishing your work and wafer thin shavings or the wider opening...
£199.00 inc VAT
Veritas Low-Angle Block Plane + PM-V11 BladeVeritas Low-Angle Block Plane + PM-V11 Blade
Veritas Low-Angle Block Plane + PM-V11 Blade
Veritas have made a block plane that uses a ''Norris'' style combined sideways (lateral) and up and down adjustment which gives you greater control when adjusting its impressive 1/8'' thick by 1 5/8'' wide PM-V11. This plane also overcomes one of the drawbacks of other block planes in having higher side wings (ideal for shooting) with finger grips in each side. The...
£195.00 inc VAT

Veritas DX60 Block Plane + PM-V11 BladeVeritas DX60 Block Plane + PM-V11 Blade
Veritas DX60 Block Plane + PM-V11 Blade
This Veritas DX60 block plane is one of the finest planes that Veritas have ever made. 4 years of design work culminates in a superb plane made to exacting standards and featuring newly refined stainless-steel hardware. The knob and wheel have elegant elliptical knurled edges for a firm grip. The lever cap has been extensively redesigned to integrate cleanly with the plane body and provide an...
£265.00 inc VAT
Clifton Adjustable Low Angle Block Plane
Clifton Adjustable Low Angle Block Plane
Made from bronze, this block plane aims to offer the ultimate in comfort and style. Aiming to fit your hand perfectly with it's high quality walnut handle, this block plane will allow you to shave the surface of your project with ease. Made from a high quality bronze casting, made here in Sheffield UK, this is then finished with the new signature graphite colour on the body to offer one of the...
£305.00 inc VAT

Veritas Miniature Low Angle Block Plane
Veritas Miniature Low Angle Block Plane
This version of the Veritas low-angle block plane is about a third the size of the original. At just under 2½" long and ¾" wide, it is a useful size for small-scale work or where a larger plane would be difficult to use. The low 12° bed angle combined with the 25° blade bevel gives it a cutting angle of 37°, making it also suitable for end-grain use. The stainless-steel Norris-style adjuster...
£68.45 inc VAT
Veritas Standard Angle Block Plane + PM-V11 Blade
Veritas Standard Angle Block Plane + PM-V11 Blade
This is the standard angle version of the Veritas low angle block plane. Preferred for general-purpose work, the 20° bed angle plus the 25° bevel angle on the bevel-up blade result in an effective cutting angle of 45°, the same as found in most bench planes. A low-profile lever cap results in a plane that fits the hand well, at only 1/8" higher than its low-angle sibling. Mechanically,...
£219.00 inc VAT

Lie-Nielsen No.507 Rebating Block Plane
Lie-Nielsen No.507 Rebating Block Plane
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished bronze. The throat is non adjustable. It is 6¼" long...

5

£218.00 inc VAT
Veritas Skew Block Plane + PM-V11 BladeVeritas Skew Block Plane + PM-V11 Blade
Veritas Skew Block Plane + PM-V11 Blade
The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A Bubinga knob locks the toe...
£274.00 inc VAT

Lie-Nielsen No.140 Skew Block Plane - Iron (Right)Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
Back In Stock
Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
The Lie-Nielsen No 140 Skew Block Plane in iron. This is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A retractable nicker scores cross-grain fibres, and the removable side plate and adjustable fence allow quick conversion to rabbeting...
£450.00 inc VAT
Lie-Nielsen Bronze Low Angle Block Plane
Lie-Nielsen Bronze Low Angle Block Plane
The Lie-Nielsen small bronze Low Angle Block Planes fit perfectly in the hand and slip easily into the pocket. The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive Stainless Steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The mouth is not adjustable. The blade in the Low Angle Plane is bedded at 12° for fine cuts...

5

£169.00 inc VAT

Veritas Pocket Plane + PM-V11 Blade
Veritas Pocket Plane + PM-V11 Blade
The Veritas Pocket Plane at just 4½" long and 1¼" wide overall, and weighing just less than 11oz, is aptly named - it's small and light enough to carry in an apron pocket all day. Designed with a bevel-up configuration and a fully functional combined feed and lateral adjustment mechanism, it has a finer cutting action than you might expect from such a small tool. This makes it admirably suited...
£125.55 inc VAT
Veritas Apron Plane + PM-V11 Blade
Veritas Apron Plane + PM-V11 Blade
This small, low-angle block plane from Veritas is the answer to a trim carpenter's prayers. At only 14oz it is half the weight of a standard block plane, a significant factor if you want to carry it with you all day. The 5½" long, tough ductile cast iron body will take job-site accidents in stride. This is not a plane body that will break when dropped. It has good hand feel; the unique side...
£138.00 inc VAT

Lie-Nielsen Model Maker's Block Plane No.100
Lie-Nielsen Model Maker's Block Plane No.100
This delightful, small low angle tool fits snugly in the palm of your hand. It is a miniature work-horse ideal for all sorts of chamfering and trimming jobs. Blade is 7/8" wide, .125 thick. At 4 3/8" long and 1 1/4" wide, weighing 8oz, this plane is effortless to use.
£105.00 inc VAT
Lie-Nielsen No.100 1/2 Convex Sole Block PlaneLie-Nielsen No.100 1/2 Convex Sole Block Plane
Lie-Nielsen No.100 1/2 Convex Sole Block Plane
This is a sweet little plane from Lie-Nielsen Toolworks. This curved sole low angle block plane is perfect for all sorts of hollowing jobs, chair seats, mouldings, model making, etc. The radius across the width of the sole is 3 inches, from end to end the radius is 27 inches. The sole is 3 1/2 inches long and the overall length with the squirrel tail handle is 5 inches. The 1/8 inch thick...
£150.00 inc VAT

Lie-Nielsen No 101 Violin Maker's Plane
Lie-Nielsen No 101 Violin Maker's Plane
This pocket-sized block plane is the smallest of the Lie-Nielsen hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut. Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability,...
£132.00 inc VAT
Lie-Nielsen Low Angle Smoother
Lie-Nielsen Low Angle Smoother
The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a Smoothing Plane because of its size (the same as the Lie-Nielsen...
£362.00 inc VAT

Lie-Nielsen No.3 Iron Smoothing Plane
Lie-Nielsen No.3 Iron Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from an iron casting. Comes with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth without having to remove the lever cap...
£357.00 inc VAT
Clifton No.3 Smoothing Plane
Clifton No.3 Smoothing Plane
A Clifton No.3 Smoothing Plane. This is the smallest smoothing plane Clifton make; ideal for those with smaller hands, or those with smaller jobs that don't require so much heft. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the mouth. Blade is cryogenically treated O1 steel, heated to 60-62 Rockwell. Cutter...
£325.00 inc VAT

Lie-Nielsen No.4 Iron Smoothing Plane
Lie-Nielsen No.4 Iron Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or an iron casting. They all come with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth...
£419.00 inc VAT
Clifton No.4 Smoothing Plane
Clifton No.4 Smoothing Plane
A Clifton No.4 Smoothing Plane. The most popular size of smoother. Despite its size this plane has a very heavy casting and is ideal for getting you the finish you deserve! Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the mouth. Blade is cryogenically treated O1 steel, heated to 60-62 Rockwell. Cutter Size: 2"...
£325.00 inc VAT

Lie-Nielsen No.4 1/2 Iron Smoothing Plane
Back In Stock
Lie-Nielsen No.4 1/2 Iron Smoothing Plane
Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10-3/8" (264mm) long. 2-3/8" (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).
£450.00 inc VAT
Clifton No.4 1/2 Smoothing Plane
Clifton No.4 1/2 Smoothing Plane
A Clifton No.4 1/2 Smoothing Plane. This is a real beauty, and weighs in at an impressive 2.5kg. It's the largest of the three smoothers from Clifton, so ideal when you need something a bit wider than the no.4. Polish the blade, and set the plane up for a fine shaving, and you will be left with a surface to be proud of. Bedrock design frog allows for maximum contact between frog and plane...
£335.00 inc VAT

Veritas Bevel-Up Smoother Plane + PM-V11 Blade
Back In Stock
Veritas Bevel-Up Smoother Plane + PM-V11 Blade
The latest addition to the Veritas family of low-angle bench planes is the state-of-the-art pure smoothing plane. It is the plane to use for the final finish on surfaces, especially woods of difficult grain patterns. It also complements the low-angle jack plane. Veritas have combined the generous width and weight of a dedicated smoother with the versatile inner workings of a low-angle bevel-up...
£299.00 inc VAT
Veritas Low-Angle Smoothing Plane + PM-V11 BladeVeritas Low-Angle Smoothing Plane + PM-V11 Blade
Veritas Low-Angle Smoothing Plane + PM-V11 Blade
The Veritas low-angle smooth plane has three key uses. It is used to smooth large surfaces, preferably taking a diagonal cut, partly across and partly along the grain. Similarly, with its generous sides, it is ideal for shooting mitres. Finally, it is excellent for end-grain work. The low cutting angle of 37° minimizes fibre tearing. With a bed angle of 12°, this is a "bevel-up" plane, like a low-angle...
£306.00 inc VAT

Veritas Small Bevel-Up Bench Plane + PM-V11 BladeVeritas Small Bevel-Up Bench Plane + PM-V11 Blade
Veritas Small Bevel-Up Bench Plane + PM-V11 Blade
This Veritas low angle smoother is 225mm long, 59mm wide and weighs only 1.25kg. It is easier to handle than a full size smoother. Think of it lying somewhere between a large block plane and a full size smoother, then you’ll see just how useful this plane can be. Like a full size version, it is useful for final finishing of surfaces, end-grain work and for shooting mitres. The ductile cast...
£276.00 inc VAT
Lie-Nielsen No.62 Low Angle Jack PlaneLie-Nielsen No.62 Low Angle Jack Plane
Back In Stock
Lie-Nielsen No.62 Low Angle Jack Plane
The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°). This makes the most versatile group of planes even more versatile. Comes with a 2" (50mm) wide A2 steel blade which is .175" (4.5mm) thick. From the box it has a 25° bevel, but it is worth sticking a secondary bevel of 5° on it if...
£320.00 inc VAT

Lie-Nielsen No.5 Jack Plane
Lie-Nielsen No.5 Jack Plane
The equivalent of a later type Stanley Bedrock No.605 jack plane. 14" long (355mm) 2" wide blade (50mm) Iron body 5-1/2lbs (2.5kg)
£462.00 inc VAT
Clifton No.5 Jack Plane
Clifton No.5 Jack Plane
A Clifton No.5 Jack Plane. The smaller of the two jack planes from Clifton. All Clifton planes have a heavy casting, so if you do not need the extra width of the 5 1/2 this could be the jack plane for you. Bedrock design frog allows for maximum contact between frog and plane body, and gives you easier, more precise adjustment of the mouth. Blade is cryogenically treated O1 steel, heated to...
£340.00 inc VAT

Lie-Nielsen No.5 1/2 Jack Plane
Lie-Nielsen No.5 1/2 Jack Plane
A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility. The equivalent of a later type Stanley Bedrock No.605½. 14-3/4" (375mm) long. 2-3/8" (60mm) wide blade. A2 steel. Iron body, 7lbs (3.15kg).
£492.00 inc VAT
Veritas Low-Angle Jack Plane + PM-V11 BladeVeritas Low-Angle Jack Plane + PM-V11 Blade
Veritas Low-Angle Jack Plane + PM-V11 Blade
The Veritas® low-angle jack plane is an exceptionally versatile plane. It excels at end grain work, is great for shooting, and also works well for smoothing. With the optional high-angle blade, it is also the answer for working difficult grain, making it a well-rounded workhorse. Veritas have designated it as a 62½ because of its generous size, heavier weight, low center of gravity...
£335.00 inc VAT

Clifton No.5 1/2 Jack Plane
Back In Stock
Clifton No.5 1/2 Jack Plane
A Clifton No.5 1/2 Jack Plane. This is a mighty jack at 3.1kg and is the largest of jack planes from Clifton. The 5 1/2 is regularly considered the go to plane for people starting out as it really is the most versatile of the bevel-down planes. The name ''jack plane'' comes from ''jack of all trades''. Bedrock design frog allows for maximum contact between frog...
£349.00 inc VAT
Lie-Nielsen No.6 Fore Plane
Lie-Nielsen No.6 Fore Plane
The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a leveled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2 steel. Iron body. 7½lbs (3.4kg). ...
£510.00 inc VAT

Clifton No.6 Fore Plane
Clifton No.6 Fore Plane
A Clifton No.6 Fore Plane. This size plane is often overlooked as people opt for the longer No.7 Jointer or a shorter 5 1/2. But if you do not wish to go to the length of a No.7 which is 4" (10cm) longer, then the No.6 could be the one at 18" long (45cm). If you have a 5 1/2 and a No.7 already then this plane is not for you. However, if you just have a smoother then this could be the perfect...
£375.00 inc VAT
Clifton No.7 Jointer Plane
Clifton No.7 Jointer Plane
A Clifton No.7 Jointer Plane. This jointer is the longest plane Clifton produce at 22" (55cm). Ideal for edge jointing and flattening larger areas before using a smoother. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane. Bedrock design frog allows for maximum contact between...
£395.00 inc VAT

Lie-Nielsen No.7 JointerLie-Nielsen No.7 Jointer
Lie-Nielsen No.7 Jointer
The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane. The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22" (558mm) long. 2 3/8" (60mm) wide blade....
£580.00 inc VAT
Lie-Nielsen No.8 Jointer
Lie-Nielsen No.8 Jointer
The Lie-Nielsen No.8 Jointer, a real whopper of a plane. It is the largest production plane at 24" (610mm). It will flatten and true like no other. 24" (610mm) long. 2-5/8" (66mm) wide blade. A2 steel. Iron body, 10lbs (4.5kg).
£640.00 inc VAT

Veritas Box-Maker's Plough PlaneVeritas Box-Maker's Plough Plane
Veritas Box-Maker's Plough Plane
This tool has been missing for a very long time. It is based upon the Record 043 Plough Plane which was produced during the heydays of British manufacturing. An ideal tool for making grooves in boxes and small drawers, this compact plough plane excels at precise grooving and beading applications on small workpieces. 5 1/2" (140mm) long cast-iron body and weighing just 1 lb 7 oz (650 grams),...
from £152.00 inc VAT
Veritas Bevel-Up Jointer Plane  + PM-V11 Blade
Veritas Bevel-Up Jointer Plane + PM-V11 Blade
The Veritas low-angle jointer is the largest member of the Veritas bevel-up bench plane family. At 22" x 2.7/8" and weighing 7½lb, it is the answer for jointing edges and flattening large panels. The bevel-up blade configuration results in a plane that is versatile and straightforward to use. The 12° bed angle, coupled with the 25° blade bevel, creates an effective cutting angle of 37°. Simply...
£385.00 inc VAT

Veritas No 1 Bevel Up Plane + PM-V11 BladeVeritas No 1 Bevel Up Plane + PM-V11 Blade
Veritas No 1 Bevel Up Plane + PM-V11 Blade
This Veritas bevel-up version of a No.1 bench plane has a sole measuring only 45mm wide and 148mm long. Size wise very similar to a block plane and like a block plane, light enough to use single-handed. This is a super bench plane for small-scale work. It features a Norris-type adjuster for easy, accurate blade setting, and guide screws to center and fix the blade. The adjustable mouth can be closed...
£256.00 inc VAT
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack PlaneSide Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
This powder-coated Aluminum 'Hot Dog' attaches to the side of the No. 62 Low Angle Jack Plane to make shooting more comfortable.
£92.00 inc VAT

Lie-Nielsen Large Router Plane Closed Throat
Lie-Nielsen Large Router Plane Closed Throat
A router plane is a great tool for working shallow mortices - hinge gains, inlay, doorlocks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley 071 model, but with a closed throat which is ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Also, the blade is held solidly in the body in a square broached hole (blades...
£269.00 inc VAT
Lie-Nielsen Large Router Plane Open ThroatLie-Nielsen Large Router Plane Open Throat
Lie-Nielsen Large Router Plane Open Throat
A router plane is a great tool for working shallow mortices - hinge gains, inlay, doorlocks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley 071 model, the Open Throat design offers more visibility in front of the tool, which is especially useful for inlay work. Also, the blade is held solidly in the body in a square broached hole (blades will not fit original...
£269.00 inc VAT

Lie-Nielsen Small Router Plane Open ThroatLie-Nielsen Small Router Plane Open Throat
Lie-Nielsen Small Router Plane Open Throat
Loosely based on the Stanley No. 271, these small Router Planes are perfect for shallow mortise and small relief work. The compact design makes it easy to guide along narrow edges and fit into tight spaces. The Closed Throat design gives more support in front of the blade, making it ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Lie-Nielsen...
£115.00 inc VAT
Veritas Router PlaneVeritas Router Plane
Back In Stock
Veritas Router Plane
Veritas Router Plane
£237.00 inc VAT

Veritas Medium Router PlaneVeritas Medium Router Plane
Veritas Medium Router Plane
Slightly larger than the Veritas small router plane, this tool has the advantage of using the same blades as our full-size router plane. For general use, the blade may be positioned inboard with the sole encircling it for maximum registration on the workpiece, even when approaching from the side or working an edge. This allows it to bridge recesses, providing great stability even on narrow stock....
from £126.00 inc VAT
Lie-Nielsen Small Router Plane Closed ThroatLie-Nielsen Small Router Plane Closed Throat
Lie-Nielsen Small Router Plane Closed Throat
Loosely based on the Stanley No. 271, these small Router Planes are perfect for shallow mortise and small relief work. The compact design makes it easy to guide along narrow edges and fit into tight spaces. The Closed Throat design gives more support in front of the blade, making it ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Lie-Nielsen...
£115.00 inc VAT

Veritas Small Router PlaneVeritas Small Router Plane
Veritas Small Router Plane
The Veritas Small Router Plane is a versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes. The sole is designed to completely encircle the blade when in the closed-throat position for maximum registration to the workpiece, even when approaching from the side or working...
£70.40 inc VAT
Depth Stop for Lie-Nielsen 271 Small Router PlanesDepth Stop for Lie-Nielsen 271 Small Router Planes
Depth Stop for Lie-Nielsen 271 Small Router Planes
Brass depth stop makes it easy to cut predetermined depth repeatedly.
£23.00 inc VAT
Page: 1 | 2 | 3 | 4 | 5 |