Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

   
 

Secure Online Shopping



Pegas Scroll Saw Blades

Pégas scroll saw blades are manufactured in Switzerland from high quality carbon steel and contain the highest possible carbon content for saw blade applications. Pégas also makes use of a proven fabricating process that produces crisp, sharp, precisely formed teeth. All the blades are heat treated and tempered to maintain uniform grain structure and to achieve the highest hardness possible. This process creates long lasting durable blades, making them the finest in the world. Additionally, all Pégas scrollsaw blades are capable of performing in power saw applications.

Specification Details can be downloaded here

Pegas Skip Tooth Blades
Ref: P90.4-ST


These blades are a good all round versatile application blade. The range of sizes and teeth per inch allows the cutting of intricate patterns as well as rough-cut work. Thickness of work range from 1/16 inch to 2½ inch. Skip blades perform well with wood, plastic, bone, Corian and most fibrous materials. The blades provide good chip removal, will accept a fast feed rate, and will give a smooth finish.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Skip Tooth number (Thickness in inches x Width in inches x TPI)

For example Pegas Skip Tooth 2/0 (T 0.0078 x W 0.026 x 28 TPI)

Prices incl VAT 


Pegas Skip Tooth Blades

Quantity:  


Pegas Skip Tooth 8 (T 0.016 x W 0.053 x 14 TPI) P90.409/B 2.53
Pegas Skip Tooth 10 (T 0.017 x W 0.060 x 12.5 TPI) P90.411/B 2.62



Pegas Super Skip Tooth Blades
Ref: P90.5-SS


These blades offer an exceptionally clean cut for intricate fret work - the higher the tpi number, the finer the cut that can be made. Super skip tooth blades are versatile, performing well in wood, plastic, bone, Corian® and most fibrous materials but they are especially good for hardwoods. Thickness of work ranges from 1.5mm to 60mm.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Skip Tooth number (Thickness in inches x Width in inches x TPI)

For example Pegas Super Skip Tooth 2/0 (T 0.0087 x W .0236 x 21.4 TPI)

Prices incl VAT 


Pegas Super Skip Tooth Blades

Quantity:  


Super Skip Tooth 2/0 (T 0.0087 x W .0236 x 21.4 TPI) P90.579/B 3.25
Super Skip Tooth 0 (T 0.0094 x W 0.0291 x 19.3 TPI) P90.580/B 3.25
Super Skip Tooth 1 (T 0.0102 x W 0.0300 x 17.2 TPI) P90.581/B 3.25
Super Skip Tooth 4 (T 0.0134 x W 0.0374 x 13.8 TPI) P90.584/B 3.25
Super Skip Tooth 5 (T 0.0142 x W 0.0402 x 12.8 TPI) P90.585/B 3.25
Super Skip Tooth 6 (T 0.0150 x W 0.0441 x 12 TPI) P90.586/B 3.25
Super Skip Tooth 7 (T 0.0157 x W 0.0488 x 11.3 TPI) P90.587/B 3.25
Super Skip Tooth 8 (T 0.0165 x W 0.0504 x 10.7 TPI) P90.588/B 3.25
Super Skip Tooth 9 (T 0.0173 x W 0.0512 x 10.1 TPI) P90.589/B 3.25
Super Skip Tooth 10 (T 0.0181 x W 0.0543 x 9.6 TPI) P90.590/B 3.25
Super Skip Tooth 11 (T 0.0189 x W 0.0575 x 9.2 TPI) P90.591/B 3.25
Super Skip Tooth 12 (T 0.0197 x W 0.0610 x 8.8 TPI) P90.592/B 3.25



Pegas Progressive Skip Tooth Blades
Ref: P90.46-PS


These blades are versatile, performing well in wood, plastic, bone, Corian® and most fibrous materials. These blades feature fine entry teeth to avoid splitting or tear-out and have coarser teeth in the centre to clear the waste. Perfect for coated materials or veneered surfaces, they give a very clean internal cut. Thickness of work ranges from 1.5mm to 60mm.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Skip Tooth number (Thickness in inches x Width in inches x TPI)

For example Pegas Progressive Skip 2 (T 0.0118 x W 0.0267 x 21 TPI)

Prices incl VAT 


Pegas Progressive Skip Tooth Blades

Quantity:  


Progressive Skip 2 (T 0.0118 x W 0.0267 x 21 TPI) P90.467/B 3.25
Progressive Skip 5 (T 0.0142 x W 0.0402 x 17 TPI) P90.468/B 3.25
Progressive Skip 8 (T 0.0165 x W 0.0504 x 14 TPI) P90.469/B 3.25



Pegas Double Tooth Blades
Ref: P90.5-DT


Pégas Double Tooth Scroll Saw Blades are a popular blade due to the excellent blend of the tooth/skip pattern. Double tooth blades contain sets of closely pitched teeth that aid in producing a fine finish and the skip adds the benefit of effective chip removal. Thickness of work range 1/16 inch to 2-1/2 inch. Double tooth blades perform well with wood, plastic, bone, Corian and most fibrous materials.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Double Tooth number (Thickness in inches x Width in inches x TPI)

For example Pegas Double Tooth 2/0 (T 0.0078 x W 0.026 x 28 TPI)

Prices incl VAT 


Pegas Double Tooth Blades

Quantity:  


Pegas Double Skip 3 (T .0118 x W .038 x 16.5 TPI) P90.524/B 2.36
Pegas Double Skip 5 (T .0145 x W .0425 x 15 TPI) P90.526/B 2.36
Pegas Double Skip 7 (T .015 x W .050 x 13 TPI) P90.528/B 2.53



Pegas Reverse Skip Blades
Ref: P90.4-RS


Reverse Skip Scroll Saw Blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. Thickness of work range 1/4" to 2". Blades perform well with wood, plastic, bone, Corian and most fibrous materials.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Reverse Skip number (Thickness in inches x Width in inches x TPI)

For example Pegas Reverse Skip 3R (T 0.0078 x W 0.026 x 13/7r TPI)

Prices incl VAT 


Pegas Reverse Skip Blades

Quantity:  


Pegas Reverse Skip 3R (T .013 x W .035 x 13/7r TPI) P90.428/B 3.20
Pegas Reverse Skip 5R (T .018 x W .045 x 12/9r TPI) P90.429/B 3.20
Pegas Reverse Skip 7R (T .018 x W .045 x 10/7r TPI) P90.430/B 3.54
Pegas Reverse Skip 9R (T .018 x W .045 x 8/6r TPI) P90.431/B 3.54



Pegas Double Tooth Reverse Blades
Ref: P90.4-DTR


DoubleTooth Reverse Skip Scroll Saw Blades have the same basic tooth geometry as skip blades except that a limited number of reverse teeth have been added to the bottom of the blade. Reverse teeth prevent splinters from developing on the underside of the work piece because the top teeth do not cut entirely through the work. Thickness of work range 1/4" to 2". Blades perform well with wood, plastic, bone, Corian and most fibrous materials.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Double Tooth Reverse number (Thickness in inches x Width in inches x TPI)

For example Pegas Double Tooth Reverse 5R (T 0.0078 x W 0.026 x 12/8r TPI)

Prices incl VAT 


Pegas Double Tooth Reverse Blades

Quantity:  


Pegas Double Tooth Reverse 5R (T.018 x W.045 x 12/8r TPI) P90.432/B 3.20
Pegas Double Tooth Reverse 7R (T.018 x W.045 x 10.5/7r TPI) P90.433/B 3.54
Pegas Double Tooth Reverse 9R (T.018 x W.045 x 9/6r TPI) P90.434/B 3.54



Pegas Modified Geometry Blades
Ref: P.90.4-MG


Modified Geometry Scroll Saw Blades tooth design, minimizes burning, tolerates aggressive feed rates, expels chips extremely fast, leaves a smooth finish and cuts patterns accurately. This (plain end) blade can be used on soft and hard wood up to 3" thick. It is also well suited for plastic. If you are currently using Olson PGT or Mach blades you will love our Modifed Geometry blades.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Modified Geometry number (Thickness in inches x Width in inches x TPI)

For example Pegas Modified Geometry 2/0 SPR (T 0.0078 x W 0.026 x 15/10 TPI)

Prices incl VAT
 


Pegas Modified Geometry Blades

Quantity:  


Pegas Modified Geometry 1 SPR (T.011 x W.030 x 13/7TPI) P90.439/B 5.57
Pegas Modified Geometry 3 SPR (T.0125 x W.033 x 13/7TPI) P90.440/B 5.57
Pegas Modified Geometry 5 SPR (T.015 x W.037 x 13/7TPI) P90.441/B 5.57
Pegas Modified Geometry 7 SPR (T.017 x W.043 x 10/7TPI) P90.442/B 5.57



Pegas Metal Cutting blades
Ref: P90.5-MC


These are high quality blades for precise cutting of thin metals up to .125 inch (3 mm) thick and for other hard, non metallic materials. They are specifically heat treated to give maximum performance with power scroll saws. Can be used in hand frames also.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Metal Cutting number (Thickness in inches x Width in inches x TPI)

For example Pegas Metal Cutting 2/0 (T 0.010 x W 0.021 x 59 TPI)

Prices incl VAT 


Pegas Metal Cutting blades

Quantity:  


Pegas Metal Cutting 2/0 (T .010 x W .021 x 56 TPI) P90.541/B 3.79
Pegas Metal Cutting 1 (T .012 x W .025 x 48 TPI) P90.543/B 3.79
Pegas Metal Cutting 3 (T .014 x W .029 x 40 TPI) P90.545/B 3.79
Pegas Metal Cutting 5 (T .016 x W .033 x 35 TPI) P90.547/B 3.79



Pegas Spiral Blades
Ref: P90.50-S


Spiral Scroll Saw Blades (plain end) allow cutting around the entire periphery of the blade due to a helical shape. This design allows work to be fed in straight moves. The work does not have to be turned to make cuts, so sharp inside corners can be created. Excellent for wood, plastic, ferrous metals, nonferrous metals, bone, wax and more.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Spiral number (Diameter inches x TPI)

For example Pegas Spiral 3 (D 0.041 x 40 TPI)

Prices incl VAT 


Pegas Spiral Blades

Quantity:  


Pegas Spiral 3 (D .041 x 40 TPI) P90.504/B 3.62
Pegas Spiral 5 (D .043 x 35 TPI) P90.506/B 3.88
Pegas Spiral 7 (D .051 x 28 TPI) P90.508/B 3.88



Pegas Regular Scroll 5" Blades
Ref: P90.4-RS5


Regular Scroll Saw Blades (plain end) 5" are designed as a utility blade for a broad range of applications. These blades are compatible for use in C-arm and parallel power scroll saws. Good for hard and soft wood up to 3/4" thick. Finish is medium to smooth depending on tpi selected.

5" (130mm) in length and supplied in packs of 12.

Descriptions below are:

Regular Scroll 5" (Thickness in inches x Width in inches x TPI)

For example Pegas Regular Scroll 5"(T 0.020 x W 0.049 x 25 TPI)

Prices incl VAT 


Pegas Regular Scroll 5

Quantity:  


Pegas Regular Scroll 5" (T .020 x W .049 x 25 TPI) P90.460/B/C 3.79
Pegas Regular Scroll 5" (T .020 x W .118 x 20 TPI) P90.462/B/C 3.79
Pegas Regular Scroll 5" (T .020 x W .118 x 15 TPI) P90.464/B/C 3.79
Pegas Regular Scroll 5" (T .020 x W .118 x 10 TPI) P90.465/B/C 3.79



Pegas Coping Regular/Skip 6.5" Blades
Ref: P90.5-CR6.5


For use in hand frames that require pinned end blades. These blades are compatible for use in coping saws. Good for hard and soft wood up to 3/4" thick. Finish is medium to smooth depending on tpi selected.

6.5" (165mm) in length and supplied in packs of 12.

Descriptions below are:

Coping Skip 6.5" (Thickness in inches x Width in inches x TPI)

For example Coping Skip 6.5" (T .020 x W .094 x 18 TPI)

Prices incl VAT 


Pegas Coping Regular/Skip 6.5

Quantity:  


Coping Skip 6.5" (T .020 x W .094 x 18 TPI) P90.550/C 4.80
Coping Regular 6.5" (T .020 x W .094 x 18 TPI) P90.551/C 4.80
Coping Regular 6.5" (T .020 x W .118 x 20 TPI) P90.552/C 4.80
Coping Regular 6.5" (T .020 x W .118 x 10 TPI) P90.554/C 4.80


 

 
Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement

© Classic Hand Tools Ltd | Company Registration No. 04764498 | VAT No. GB 818 111 455