Lie-Nielsen No. 212 Small Iron Scraping PlaneLie-Nielsen No. 212 Small Iron Scraping Plane
Back In Stock
Lie-Nielsen No. 212 Small Iron Scraping Plane
Please note that this is the iron version, the bronze version is temporarily unavailable. Scraping Planes are used for finishing woods that do not yield well to the hand plane. A scraping plane is more comfortable to use than a hand scraper, and a plane body helps you keep the surface you are scraping flat. They can be tricky to master, however. To make it easier, Lie-Nielsen do not recommend...

5

£269.00 inc VAT
Lie-Nielsen No.62 Low Angle Jack PlaneLie-Nielsen No.62 Low Angle Jack Plane
Back In Stock
Lie-Nielsen No.62 Low Angle Jack Plane
The Lie-Nielsen No.62 Low Angle Jack Plane. What is not to like? You take the most popular and useful jack plane and bed it at a low angle (12°). This makes the most versatile group of planes even more versatile. Comes with a 2" (50mm) wide A2 steel blade which is .175" (4.5mm) thick. From the box it has a 25° bevel, but it is worth sticking a secondary bevel of 5° on it if...
£320.00 inc VAT

Lie-Nielsen No.60 1/2 Block PlaneLie-Nielsen No.60 1/2 Block Plane
Back In Stock
Lie-Nielsen No.60 1/2 Block Plane
The Lie-Nielsen No 60½ Block Plane is based upon the old Stanley No 60½. This is a superb little block plane and should be in your tool kit, useful for all woodworking jobs in particular great for trimming end grain. The movable shoe in front of the blade allows you to easily adjust the mouth opening - fine mouth for finishing your work and wafer thin shavings or the wider opening...
£199.00 inc VAT
Lie-Nielsen No.507 Rebating Block Plane
Lie-Nielsen No.507 Rebating Block Plane
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished bronze. The throat is non adjustable. It is 6¼" long...

5

£218.00 inc VAT

Lie-Nielsen Large Router Plane Open ThroatLie-Nielsen Large Router Plane Open Throat
Lie-Nielsen Large Router Plane Open Throat
A router plane is a great tool for working shallow mortices - hinge gains, inlay, doorlocks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley 071 model, the Open Throat design offers more visibility in front of the tool, which is especially useful for inlay work. Also, the blade is held solidly in the body in a square broached hole (blades will not fit original...
£269.00 inc VAT
Lie-Nielsen No.4 Iron Smoothing Plane
Lie-Nielsen No.4 Iron Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from a manganese bronze casting, or an iron casting. They all come with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth...
£419.00 inc VAT

Lie-Nielsen No.3 Iron Smoothing Plane
Lie-Nielsen No.3 Iron Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from an iron casting. Comes with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth without having to remove the lever cap...
£357.00 inc VAT
Lie-Nielsen Bronze Low Angle Block Plane
Lie-Nielsen Bronze Low Angle Block Plane
The Lie-Nielsen small bronze Low Angle Block Planes fit perfectly in the hand and slip easily into the pocket. The 5¼" body holds a 1¼" x 1/8" thick blade. An unobtrusive Stainless Steel adjuster offers blade control of micrometer ease and precision with minimum backlash. The mouth is not adjustable. The blade in the Low Angle Plane is bedded at 12° for fine cuts...

5

£169.00 inc VAT

Lie-Nielsen No.4 1/2 Iron Smoothing Plane
Back In Stock
Lie-Nielsen No.4 1/2 Iron Smoothing Plane
Solidly built, this is the ultimate smoothing plane. It is longer, wider, and heavier than the No. 4, and its extra thick blade eliminates the possibility of chatter. Comes with a 45° frog as standard. Other frogs are available separately. 10-3/8" (264mm) long. 2-3/8" (60mm) blade. A2 steel. Iron body 5½lbs (2.5kg).
£450.00 inc VAT
Lie-Nielsen No.5 Jack Plane
Lie-Nielsen No.5 Jack Plane
The equivalent of a later type Stanley Bedrock No.605 jack plane. 14" long (355mm) 2" wide blade (50mm) Iron body 5-1/2lbs (2.5kg)
£462.00 inc VAT

Lie-Nielsen Scrub Plane
Lie-Nielsen Scrub Plane
This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful practical for shaping irregular objects or creating an interesting finished surface. The Lie Nielsen Scrub Plane has a cast Iron body, 10¼" long. The blade is massive...
£275.00 inc VAT
Lie-Nielsen Large Router Plane Closed Throat
Lie-Nielsen Large Router Plane Closed Throat
A router plane is a great tool for working shallow mortices - hinge gains, inlay, doorlocks, trimming tenons and the like. Lie-Nielsen's version is based on an early Stanley 071 model, but with a closed throat which is ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Also, the blade is held solidly in the body in a square broached hole (blades...
£269.00 inc VAT

Lie-Nielsen Chisel Plane
Lie-Nielsen Chisel Plane
The Lie-Nielsen Chisel Plane is the perfect little tool (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 3/16" thick blade is set at 12 degrees. You adjust the depth of the cut by a nicely machined knurled knob. American cherry handle. !!!!
£199.00 inc VAT
Lie-Nielsen Small Router Plane Closed ThroatLie-Nielsen Small Router Plane Closed Throat
Lie-Nielsen Small Router Plane Closed Throat
Loosely based on the Stanley No. 271, these small Router Planes are perfect for shallow mortise and small relief work. The compact design makes it easy to guide along narrow edges and fit into tight spaces. The Closed Throat design gives more support in front of the blade, making it ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Lie-Nielsen...
£115.00 inc VAT

Lie-Nielsen No.042 Medium Shoulder Plane
Lie-Nielsen No.042 Medium Shoulder Plane
A improved version of the now discontinued Record 042. This plane is 3/4" wide and weighs 2.35 lbs. The body is 9¼" long, with a 3/4" x .140" thick blade. This is an elegant tool for trimming and fitting tenons, dados and rebates. !!!!
£299.00 inc VAT
Lie-Nielsen No.073 Large Shoulder Plane
Lie-Nielsen No.073 Large Shoulder Plane
A versatile, general purpose Shoulder Plane with nice heft and the best size to start with. This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model. The Bronze lever cap is higher for better grip and closer to the blade bevel for better support. The mouth geometry allows for better chip clearance, while the adjustable mouth and locking screws are large...
£376.00 inc VAT

Lie-Nielsen Low Angle Smoother
Lie-Nielsen Low Angle Smoother
The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane - with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs. It is called a Smoothing Plane because of its size (the same as the Lie-Nielsen...
£362.00 inc VAT
Lie-Nielsen No.140 Skew Block Plane - Iron (Right)Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
Back In Stock
Lie-Nielsen No.140 Skew Block Plane - Iron (Right)
The Lie-Nielsen No 140 Skew Block Plane in iron. This is based on the long unavailable Stanley 140, this multi-talented tool is designed to deal with difficult woods using a combination of a low angle approach, shear cutting action from the skewed and tilted blade. A retractable nicker scores cross-grain fibres, and the removable side plate and adjustable fence allow quick conversion to rabbeting...
£450.00 inc VAT

Lie-Nielsen Tongue & Groove Plane - 3/4"
Lie-Nielsen Tongue & Groove Plane - 3/4"
The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed. Comes with a 3/16'' (4.8mm) thick A2 steel...
£329.00 inc VAT
Lie-Nielsen No.40B Butt Mortice Plane
Lie-Nielsen No.40B Butt Mortice Plane
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners. The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4" x 1", with a 3/4" wide blade.
£210.00 inc VAT

Lie-Nielsen No.51 Shooting Board Plane - Right HandLie-Nielsen No.51 Shooting Board Plane - Right Hand
Lie-Nielsen No.51 Shooting Board Plane - Right Hand
The Lie-Nielsen Shooting Board Plane is a single purpose plane is designed to trim mitres and other end grain cuts on a shooting board. Stanley first made its version in 1909 along with a metal shooting board. Lie-Nielsen had many requests for this tool over the years, so we are pleased they redesigned the Stanley version. The Lie-Nielsen version utilises a standard 60mm (2.3/8") bench plane...
£770.00 inc VAT
Lie-Nielsen No.100 1/2 Convex Sole Block PlaneLie-Nielsen No.100 1/2 Convex Sole Block Plane
Lie-Nielsen No.100 1/2 Convex Sole Block Plane
This is a sweet little plane from Lie-Nielsen Toolworks. This curved sole low angle block plane is perfect for all sorts of hollowing jobs, chair seats, mouldings, model making, etc. The radius across the width of the sole is 3 inches, from end to end the radius is 27 inches. The sole is 3 1/2 inches long and the overall length with the squirrel tail handle is 5 inches. The 1/8 inch thick...
£150.00 inc VAT

Lie-Nielsen Model Maker's Block Plane No.100
Lie-Nielsen Model Maker's Block Plane No.100
This delightful, small low angle tool fits snugly in the palm of your hand. It is a miniature work-horse ideal for all sorts of chamfering and trimming jobs. Blade is 7/8" wide, .125 thick. At 4 3/8" long and 1 1/4" wide, weighing 8oz, this plane is effortless to use.
£105.00 inc VAT
Lie-Nielsen No 101 Violin Maker's Plane
Lie-Nielsen No 101 Violin Maker's Plane
This pocket-sized block plane is the smallest of the Lie-Nielsen hand planes to feature a captive nut blade adjuster for precisely controlled depth of cut. Loosely based on the Stanley No.101 block plane, the Lie-Nielsen Violin Maker’s Plane features several significant improvements that put it in a class of its own. The body and cap are made from Manganese Bronze for extra weight, durability,...
£132.00 inc VAT

Lie-Nielsen No.5 1/2 Jack Plane
Lie-Nielsen No.5 1/2 Jack Plane
A Lie-Nielsen No.5 1/2 Jack Plane. Probably the most popular bench plane, and the one that many woodwork teachers recommend starting out with due to its versatility. The equivalent of a later type Stanley Bedrock No.605½. 14-3/4" (375mm) long. 2-3/8" (60mm) wide blade. A2 steel. Iron body, 7lbs (3.15kg).
£492.00 inc VAT
Lie-Nielsen No.6 Fore Plane
Lie-Nielsen No.6 Fore Plane
The Lie-Nielsen No.6 Fore Plane is sized midway between a Jack and a Jointer. The No.6 Fore Plane is designed to further true the surface after the Jack has sized it. Its length enables it to skim off high spots as it bridges low spots, delivering a leveled surface ready for the smoothing plane. 18" (457mm) long 2 3/8" (60mm) blade. A2 steel. Iron body. 7½lbs (3.4kg). ...
£510.00 inc VAT

Lie-Nielsen No.7 JointerLie-Nielsen No.7 Jointer
Lie-Nielsen No.7 Jointer
The Lie-Nielsen No.7 Jointer Plane is a great plane for edge jointing and flattening larger areas. The late, great Alan Peters used his No.7 for pretty much everything, and today we still come across ex-students which still favour their jointer over any other plane. The equivalent of a later type Stanley Bedrock No.607 jointer plane. 22" (558mm) long. 2 3/8" (60mm) wide blade....
£580.00 inc VAT
Lie-Nielsen No.8 Jointer
Lie-Nielsen No.8 Jointer
The Lie-Nielsen No.8 Jointer, a real whopper of a plane. It is the largest production plane at 24" (610mm). It will flatten and true like no other. 24" (610mm) long. 2-5/8" (66mm) wide blade. A2 steel. Iron body, 10lbs (4.5kg).
£640.00 inc VAT

Side Handle for the Lie-Nielsen No. 62 Low Angle Jack PlaneSide Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
Side Handle for the Lie-Nielsen No. 62 Low Angle Jack Plane
This powder-coated Aluminum 'Hot Dog' attaches to the side of the No. 62 Low Angle Jack Plane to make shooting more comfortable.
£92.00 inc VAT

Lie-Nielsen Small Router Plane Open ThroatLie-Nielsen Small Router Plane Open Throat
Lie-Nielsen Small Router Plane Open Throat
Loosely based on the Stanley No. 271, these small Router Planes are perfect for shallow mortise and small relief work. The compact design makes it easy to guide along narrow edges and fit into tight spaces. The Closed Throat design gives more support in front of the blade, making it ideal for working on the edges of boards or cleaning out the end of a stopped groove in a rail or stile. Lie-Nielsen...
£115.00 inc VAT
Lie-Nielsen No.95 Edge Trimming Block Plane (Right Hand)
Lie-Nielsen No.95 Edge Trimming Block Plane (Right Hand)
The Lie-Nielsen Edge Trimming plane is based on Stanley's No.95 plane, but you get the added choice of either right or left handed versions. It has a fixed fence that holds the iron at a 90 degree angle against the edge of a board. For boards up to about ¾" wide, this tool is a very convenient way to get square edges. Precision machined from a manganese bronze casting. !!!!
£269.00 inc VAT

Lie-Nielsen No.041 Small Shoulder Plane
Lie-Nielsen No.041 Small Shoulder Plane
This is the smallest of the Lie-Nielsen "Preston style" shoulder planes, 5/8" wide, 5 3/4" long. The blade is 0.140" thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings, this tool is just right for trimming and fitting small tenons, dadoes and rebates. Replacement Blades are available here
£245.00 inc VAT
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket ChiselLie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen have gone big! After many years of it being discussed we have 1-1/2'' version of their beloved chisels. The Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make, but Stanley and others once produced these chisels in a vast array. Socket chisel handles are less likely to...
£157.00 inc VAT

Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 bevel edge chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening. The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable,...
from £99.95 inc VAT
Lie-Nielsen 7 Tool Chisel Roll
Back In Stock
Lie-Nielsen 7 Tool Chisel Roll
7 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
£105.00 inc VAT

Lie-Nielsen 9 Tool Chisel Roll
Back In Stock
Lie-Nielsen 9 Tool Chisel Roll
9 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
£115.00 inc VAT
Lie-Nielsen 12 Tool Chisel Roll
Lie-Nielsen 12 Tool Chisel Roll
12 pocket leather tool roll, Brass fittings. Beautifully made in Maine, USA.
£115.00 inc VAT

Lie-Nielsen Set of 5 Bevel Edge Chisels
Lie-Nielsen Set of 5 Bevel Edge Chisels
The ever popular Lie-Nielsen A2 bevel edge chisels as a set. The most popular 5 sizes are included - 1/4", 3/8", 1/2", 3/4", 1". This does not include a tool roll.
£490.00 inc VAT
Lie-Nielsen Mortice Chisels
Lie-Nielsen Mortice Chisels
Designed with cabinetmaking in mind, these well-balanced Mortise Chisels are ground with parallel sides and are thicker than they are wide to help keep them straight in the cut. Made of A2 Tool Steel, hardened to Rockwell 60-62, cryogenically treated and double tempered. Maine-harvested Hornbeam handles. Overall length is approximately 10.5". The bevel is ground sharp at 30º, but a higher secondary...
£132.00 inc VAT

Lie-Nielsen Mortice Chisel Roll
Lie-Nielsen Mortice Chisel Roll
7 pocket leather tool roll, Brass fittings. Deeper tool roll accommodates the Lie-Nielsen mortise chisels. Beautifully made in Maine, USA.
£105.00 inc VAT
Lie-Nielsen Corner Chisel 3/8''
Back In Stock
Lie-Nielsen Corner Chisel 3/8''
Producing square mortises is exacting work. The Corner Chisel, used after the mortise has been roughed out by hand or with a slot mortiser—which produces round edged mortises—helps square corners easily and precisely. Made from A2 Tool Steel, hardened to RC 60-62 and ground razor sharp. Beveled at 30º. Comes with a Hickory handle. Overall length is approximately 10". Currently...
£175.00 inc VAT

Lie-Nielsen Fishtail Chisel 5/8''Lie-Nielsen Fishtail Chisel 5/8''
Back In Stock
Lie-Nielsen Fishtail Chisel 5/8''
Fishtail Chisels are perfect for reaching the back corners of half-blind dovetails and paring other hard-to-reach areas. Their unique shape offers versatility for right and left hand recesses. Made from A2 Tool Steel, hardened to RC 60-62. Maine-harvested Hornbeam handles. Overall length is approximately 8". The bevel comes ground sharp at 25º, but a higher secondary bevel is advisable,...
£148.00 inc VAT
Lie-Nielsen Chisel HandlesLie-Nielsen Chisel Handles
Lie-Nielsen Chisel Handles
Lie-Nielsen chisel handles are made from Maine-harvested Hornbeam and can be used with any of the Lie-Nielsen chisels. The standard handle is recommended for all but the largest chisels. Long chisel handles are 4" longer than the standard handles. Excellent for paring. The Mortise chisel handles are slightly larger in diameter and length than the standard chisel handle, the Mortise Chisel Handle...
from £27.00 inc VAT

Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen believe that their Back Saws are the finest made anywhere. They are an exact copy of a British saw made in 1830. Owning one is like having a piece of woodworking history in your shop. Since dovetailing is a ripping operation, where the kerf is running with the grain, the Lie-Nielsen Dovetail Saw has its teeth filed to a rip profile, unlike other dovetail saws on the market today. Solid...
£185.00 inc VAT
Lie-Nielsen Leather Saw CasesLie-Nielsen Leather Saw Cases
Lie-Nielsen Leather Saw Cases
Protect your Backsaw with this fitted Michigan Leather case. Use it for storage and transportation. Beautifully made in Maine.
from £92.00 inc VAT

Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
£185.00 inc VAT
Lie-Nielsen Carcass Saw with Cherry Handle
Lie-Nielsen Carcass Saw with Cherry Handle
The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado. It has 14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly. Blade is .020" (.5mm) thick, with a .003" (.076mm) set. Overall length, including handle, is 19" (48.26cm), with an overall height of 4-7/8" (12.38cm). Usable blade dimensions are 14"...
£185.00 inc VAT
Page: 1 | 2 | 3 |