Barr Gutter AdzeBarr Gutter Adze
Barr Gutter Adze
The Barr Gutter Adze is primarily used for roughing-out chair seats. It is also very useful for log scribe work, large bowl projects and totem work. It has a 30" hardwood handle which can be cut to desired length. 2 1/4" cutting edge, approx #6 sweep, overall head length is 9", head wt. approx 3lbs, handle length 30''
£215.00 inc VAT
Barr Hand AdzeBarr Hand Adze
Barr Hand Adze
The Barr Hand Adze is the best choice for roughing out your bowls and chair seats. Designed for maximum control the 2¼" cutting edge is just enough for the task at hand. Not too light, not too heavy it is the perfect addition to your workshop! 2¼" cutting edge, head length 8", total weight 2lbs, handle length 15"
£190.00 inc VAT

Oak-Framed Buildings
Oak-Framed Buildings
By Rupert Newman, The author originally trained as a naval architect and shipwright moved on to oak timber framed construction for houses. Full colour photographs show projects both complete and under construction. Indented for aspiring self-builders as well as established carpenters and builders. Structural details and three-dimensional drawings are included. Chapters comprise: Past...
£24.95 (VAT exempt)
Replacement Blade for Ryoba Gold Saw
Replacement Blade for Ryoba Gold Saw
Replacement blades for Ryoba Gold Saw. A double edged blade with X-cut & rip edges and traditional style handle. A choice of 4 sizes 220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220 240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size. 270mm blade - 0.6 mm thick...
from £30.00 inc VAT

Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included..... 30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand. Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt. 3" x 3/8" eyebolt with jam nut. Striker Plate with fastening screws. Two U-bolts to secure plate to brackets. ''All you have to do is cut and form the wooden components.''
£230.00 inc VAT
Barr Bench ChiselsBarr Bench Chisels
Barr Bench Chisels
The bench chisel has the same quality construction as their popular framing chisels, but with a shorter blade length. The chisels are all 13" (325mm) long overall. Available as 1" (25mm), 1½" (38mm), 2" (50mm) or as a set of 3 Bench Chisels.
£168.00 inc VAT

Crucible Lump HammerCrucible Lump Hammer
Crucible Lump Hammer
The Crucible lump hammer has a 2.2lb. hardened steel head and is ideal for assembly, mortising, setting holdfasts and dozens of other chores. Comfortable octagonal hickory handle with a waxed finish. The late, great furniture maker Alan Peters often said that one of his favourite tools was his “lump hammer,” a British term for what Americans might call an engineer’s hammer or a small sledge....
£135.00 inc VAT
Gransfors Bruk Carpenter's Axe 465Gransfors Bruk Carpenter's Axe 465
Back In Stock
Gransfors Bruk Carpenter's Axe 465
These axes have a straight edge and thin blade with low angle of the bevel face, suited for work in dry wood. The forged inward curve from the heel to the lip of the head allows your hand to grip almost straight above the centre of the edge. This, and the long straight cutting edge, gives rigidity, stability, and control when cutting. Functions like a good heavy knife. The axe poll is ground and...
£142.00 inc VAT

Gransfors Bruk Swedish Broad AxesGransfors Bruk Swedish Broad Axes
Back In Stock
Gransfors Bruk Swedish Broad Axes
The pattern of the Gransfors Broad Axe and the handle is based on old Swedish logging techniques for squaring logs and structural timbers of all kinds. Has sufficient space between the "blade’s beard" and the handle for the user’s fingers. There are different options of bevels (double, left or right). You also have handle options of straight (so the blade is in line with the...
£225.00 inc VAT
Gransfors Bruk Swedish Drawknife 486Gransfors Bruk Swedish Drawknife 486
Gransfors Bruk Swedish Drawknife 486
This is a big beast and popular for quick removal of bark from logs and other large trimming work. The hickory handles are set on full-length tangs extending straight out from the ends of the blade. The blade is bowed up and curved forward in the centre for effective peeling, shaping and smoothing. The total length is 22½". The blade is 11½" in length and 1½" wide. It weighs 1lb. 5oz. The tool...
£158.00 inc VAT

Lie-Nielsen No.073 Large Shoulder Plane
Lie-Nielsen No.073 Large Shoulder Plane
A versatile, general purpose Shoulder Plane with nice heft and the best size to start with. This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model. The Bronze lever cap is higher for better grip and closer to the blade bevel for better support. The mouth geometry allows for better chip clearance, while the adjustable mouth and locking screws are large...
£376.00 inc VAT
Lie-Nielsen No.507 Rebating Block Plane
Lie-Nielsen No.507 Rebating Block Plane
The Lie-Nielsen No 507 Rebating Block Plane is also described as a Lie-Nielsen 60½ Rebating Block Plane (60 1/2R). This 12° angle rebate block plane is based on an old Sargent block plane (No 507). The plane body is made from unbreakable ductile iron and is ground flat and square to .001". The cap iron is polished bronze. The throat is non adjustable. It is 6¼" long...

5

£218.00 inc VAT

Liquid Ink 200ml - Black
Liquid Ink 200ml - Black
For Sumitsubo and Sumisashi, it is water soluble.
£12.50 inc VAT
Liquid Ink 200ml - Red
Liquid Ink 200ml - Red
For Sumitsubo and Sumisashi, it is water soluble.
£12.50 inc VAT


Ryoba Gold Saw
Ryoba Gold Saw
A double edged blade with X-cut & rip edges and traditional style handle. A choice of 4 sizes 220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220 240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size. 270mm blade - 0.6 mm thick (spacing of teeth 2.5mm crosscut, 3.3-5.8mm...
from £55.00 inc VAT
Shinwa Ink Line (Sumitsubo)Shinwa Ink Line (Sumitsubo)
Shinwa Ink Line (Sumitsubo)
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob. No ink is included. Body length 180 mm, thread length 20 m. New design (shiny new colours!)
£38.00 inc VAT

Shinwa Ink Line (Sumitsubo) + Black InkShinwa Ink Line (Sumitsubo) + Black Ink
Shinwa Ink Line (Sumitsubo) + Black Ink
With a sealed ink reservoir to prevent ink from leaking out or drying up. Automatic spring-loaded recoil with locking mechanism. Unbreakable plastic body and thread bob. Includes 200ml black ink. Body length 180 mm, thread length 20 m. New design (shiny new colours!)
£44.50 inc VAT
Shinwa Mini Ink LineShinwa Mini Ink Line
Shinwa Mini Ink Line
Professional quality, compact Sumitsubo. Body 130 mm, line length 15 m. No ink is included. New design (shiny new colours!)
£32.00 inc VAT

Shinwa Mini Ink Line + Black InkShinwa Mini Ink Line + Black Ink
Shinwa Mini Ink Line + Black Ink
Professional quality, compact Sumitsubo. Body 130 mm, line length 15 m. Includes 200ml black ink. New design (shiny new colours!)
£39.00 inc VAT
Thomas Flinn 3ft One Man X Cut Saw
Thomas Flinn 3ft One Man X Cut Saw
One Man Crosscut - 3ft - Great Amercian Tooth. These saws are equally popular in forestry work as they are at home cutting up smaller logs for firewood. The Thomas Flinn 3ft One Man X Cut Saw has a clear finished beech handle and comes complete with an auxiliary handle which can be attached to the front of the blade so you can get some additional assistance with cutting if necessary. The handle...
£120.00 inc VAT

Thomas Flinn Pax Hand Saws
Thomas Flinn Pax Hand Saws
Handcrafted of the finest alloy steel these saws are taper ground and breasted (meaning less teeth are in contact with the wood and therefore less friction) and are precisely set and sharpened by hand to ensure the best possible cut without binding. The handle is made from the finest steamed beech with a two-tone gloss finish. With a variation of teeth sizes, there is a Handsaw for every type of...
from £105.00 inc VAT
Thomas Flinn Two Man X Cut Saw - 4ft
Thomas Flinn Two Man X Cut Saw - 4ft
Two Man Crosscut Saw - Peg Tooth 4ft. The teeth on the Thomas Flinn Two Man X Cut Saws work in a way that the teeth cut on the pull stroke on each side of the tooth and so actually cut in each pulling direction. Popular for crosscutting of logs in forestry and cutting up of firewood at home. This 4ft (122cm) version is designed for logs upto 2ft (61cm) in diameter. Pair of Beech Handles and...
£120.00 inc VAT

Veritas Jack Rebate Plane + PM-V11 Blade
Veritas Jack Rebate Plane + PM-V11 Blade
This Veritas Jack Rebate plane cuts large-scale rebating down to size. The body is 385mm long and the blade extends the full width (57mm) of the body. It is suitable for very large rebates and fielded or bevelled panels. The long sole and substantial mass help ensure accuracy. The 4.8mm thick bevel-up blade makes right or left-handed corner cuts cleanly and accurately. Adjustable scoring spurs...
£415.00 inc VAT
Veritas Large Shoulder Plane + PM-V11 BladeVeritas Large Shoulder Plane + PM-V11 Blade
Veritas Large Shoulder Plane + PM-V11 Blade
The Veritas® large shoulder plane (a specialized rabbet plane) is the latest and largest in our line of shoulder planes. Its size and mass make it perfect for trimming breadboard tenons, adjusting shoulders, or even paring down tenon cheeks. At 8¼" long, 1¼" wide and weighing 3¾ lb, it brings both authority and precision to larger work. The ductile cast iron body is accurately machined and ground...
£327.00 inc VAT

Veritas Transfer Log Scribe
Veritas Transfer Log Scribe
Can be used with 2 pencils for double scribing and the hardened steel pin can be used on one leg for smooth scribing. Fully adjustable from 0-300mm. Calibrated so that any opening can be used once the double bubbles are set for a given pencil & pin projection. Curved pin tip has rounded end for smooth scribing and straight tip is sharp pointed for compass work. Includes indelible pencil...
£158.00 inc VAT
Wood is Good Unbreakable MalletsWood is Good Unbreakable Mallets
Wood is Good Unbreakable Mallets
Wood is Good wood carving mallets from the USA. These mallets are made with an American maple handle and a urethane head that is guaranteed to be unbreakable. They are designed to be quiet and yet able to transmit the maximum force to the tool. The smaller sizes seem to be the most popular (with the 18oz the biggest seller) but the biggies also appeal to those of you doing larger scale work or...
from £48.00 inc VAT

Barr Fat Boy SlickBarr Fat Boy Slick
Back In Stock
Barr Fat Boy Slick
If you need a big slick for paring, this is the one! The curved edge skives into the material lessening the initial force needed to start your cut. 3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30".
£249.00 inc VAT
Barr Framing ChiselsBarr Framing Chisels
Barr Framing Chisels
Barr's framing chisels have become the first choice of professional timber framers and homebuilders. These chisels will take and hold a superior edge saving you time and giving you the best possible results. Hand forged from carbon steel with a flat back and socket handle, they are a must for mortise and tenon work. The chisels are all 17½" (438mm) long overall. Available as 1" (25mm), 1½" (38mm),...
£195.00 inc VAT

Barr Large SlickBarr Large Slick
Back In Stock
Barr Large Slick
This large slick will take on the toughest jobs with ease. They take and hold a fine edge without being brittle. The handle angles up away from your work surface to allow hand clearance. If you are fed up with poor quality slicks, try one of these. Like all Barr tools, your satisfaction is guaranteed or your money back. 2½" cutting edge, 7½" blade length, length from cutting edge to end of socket...
£235.00 inc VAT
Barr Scarf SlickBarr Scarf Slick
Back In Stock
Barr Scarf Slick
Invaluable for cutting scarf joints on your timber projects, this slick is a favorite among log and timber smiths. It is also well-suited for cleaning up adzed timbers. Barr's scarf slick has a mild sweep with a curved edge and will give you a slight concave cut. 3½" cutting edge, 7½" blade length, 16" from edge to end of socket, length with handle 30". Please note that this slick is not flat (by...
£236.00 inc VAT

Barr Small SlickBarr Small Slick
Back In Stock
Barr Small Slick
Built with the same fine construction as the large slick, the small slick has a 5" blade length making it a little less hefty. 2½" cutting edge, 5½" blade length, length from cutting edge to end of socket 12", length with handle 26
£220.00 inc VAT
Henry Taylor Heavy Duty Socket Firmer ChiselsHenry Taylor Heavy Duty Socket Firmer Chisels
Back In Stock
Henry Taylor Heavy Duty Socket Firmer Chisels
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
from £78.00 inc VAT

Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
Henry Taylor Heavy Duty Socket Firmer Chisels Set of 4
These Henry Taylor chisels have a thicker and longer socket than their bevel edge chisels. This gives them added strength and durability which makes them popular with timber framers. The handle is made from Ash and has a heavy brass hoop. The handles are hard wearing but should you need to change a handle it is easy to do so with the socketed design. Replacement handles can be made or purchased. Forged...
£345.00 inc VAT
Henry Taylor Registered Mortice ChiselHenry Taylor Registered Mortice Chisel
Henry Taylor Registered Mortice Chisel
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
from £28.50 inc VAT

Henry Taylor Registered Mortice Chisel Set of 5Henry Taylor Registered Mortice Chisel Set of 5
Henry Taylor Registered Mortice Chisel Set of 5
Made in Sheffield, England for over 150 years. Blade about 5½" long. F23 - 1/4" (6mm) F24a - 3/8" (9mm) F24 - 1/2" (12mm) F25 - 3/4" (19mm) F26 - 1" (25mm)
£150.00 inc VAT
Henry Taylor Swan Neck ChiselsHenry Taylor Swan Neck Chisels
Back In Stock
Henry Taylor Swan Neck Chisels
A Henry Taylor swan neck chisel is used to clean the bottom of mortices. The chisel is levered in use, not struck. Available in 1/4", 5/16" and 3/8".
from £26.00 inc VAT

Holster for Robert Sorby Timber Framer's Slick
Holster for Robert Sorby Timber Framer's Slick
A quality riveted leather holster for safer carriage of the Robert Sorby Timber Framer's Slick.
from £52.00 inc VAT
Connells Chisel Guard Set 2 - Large
Connells Chisel Guard Set 2 - Large
Set contains the following leather chisel guards: 2 x 3-3/8", 2 x 2-3/8", 2 x 2''
£31.00 inc VAT

Connells Small Chisel Guard Set 1
Connells Small Chisel Guard Set 1
Set contains the following leather chisel guards: 2 x 2", 2 x 1¼", 2 x 1", 2 x ¾", 6 x ½''
£40.00 inc VAT
Narex Mortice Chisels - Set of 4Narex Mortice Chisels - Set of 4
Narex Mortice Chisels - Set of 4
Robust mortice chisels for chopping out joints and cutting mortices. Sides taper in height and length from tip to shoulder for sidewall clearance. Bulky handle made from hornbeam which is strong enough to withstand heavy blows with a mallet. Overall length 304mm. Available as a boxed set of 4 (4mm, 6mm, 10mm and 12mm).
£66.00 inc VAT

Robert Sorby Bevel Edged Framing Chisel
Robert Sorby Bevel Edged Framing Chisel
Very similar to the RS285 framing chisel that the blade is beveled to give extra clearance in the cut. Tapered along the length. Ash handle. Shorter than the RS285 - 388mm overall length.
from £84.15 inc VAT
Robert Sorby Corner Chisel
Robert Sorby Corner Chisel
Designed for squaring up the ends of mortises, grooves or housings. The faces are precision ground to produce clean, accurate 90 degree angles. Often used nowadays to clean up after a router. Sharpen each face individually with an oil stone. The origins of this tool are from wheelwrights and millwrights who used a v shaped chisel to hollow out mortises in wheels and wooden beams (often referred...
£74.00 inc VAT

Robert Sorby Double Hooped Registered Chisel
Robert Sorby Double Hooped Registered Chisel
Originally it was thought that registered (or shipwrights chisels) were used by barge builders and they first appeared in the mid 19th century. “strong ship” or registered chisels were also described in the Scottish tool manufacturer Mathieson’s catalogue of 1900. More recently these chisels have become very popular with joiners and timber framers for mortising. The double hoops give...
from £37.07 inc VAT
Robert Sorby Framing Chisel
Robert Sorby Framing Chisel
The Robert Sorby Framing Chisel is the same principle as their registered chisel but with a longer blade and handle for deeper morticing work. Overall Size:- 495mm Blade Length:- 267mm
from £67.25 inc VAT

Robert Sorby Heavy Duty Corner Chisel
Robert Sorby Heavy Duty Corner Chisel
A heavyweight 1" (25mm) wide bruzz (corner chisel) for cleaning up deep corners of mortises. Ash Handle Overall Size:- 380-407mm Blade Length 239mm
£150.00 inc VAT
Barr 7/8' Corner Chisel
Barr 7/8' Corner Chisel
Corner chisels are forged from tough carbon steel; these chisels are hand-tapered, bent to 90 degrees, then flat ground. Terrific for cleaning out mortises. 7/8" (22.225mm) x 7/8" (22.225mm) x 18" (450mm)
£230.00 inc VAT
Page: 1 | 2 |