Classic Hand Tools

View Cart
 
 
 
     
   
     

    Secure Online Shopping

   
 

Secure Online Shopping



Bad Axe Tool Works Bad Axe Tool Works

Bad Axe Saws now available in the UK! Please check back often as we'll be adding to the range over the next few months.

Bad Axe Tool Works makes saws as they would have appeared fresh out of a 19th Century American sawmaker's shop. Why Bad Axe? Well the answer is quite simple..... Bad Axe is a city in the U.S. state of Michigan where the saws are made.

Have a read of what Chris Schwarz has to say here.

Watch the saws in action below.


Bad Axe 10'' Dovetail Saw
Ref: BAD10-DS-RIP


15 ppi Rip.
0.018" Gauge Plate.
10" blade.
Depth of cut 2".
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

"Why do I want this saw?"
Because you'll love the balance and the way it cuts with the hammer-set thin-plate toothline.  


Price: 224.00 (Including VAT at 20%)

Bad Axe 10'' Dovetail Saw

Quantity:  



Bad Axe 10" Dovetail Hybrid Saw
Ref: BAD10-DS-H


17 ppi Hybrid.
0.015" Gauge Plate.
10" blade.
Depth of cut: 1-1/2" under the back at the heel, canting down to 1-3/8" at the toe.
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

"I already own a dovetail saw--why would I want this one?"
Because you've never tried a 10" dedicated dovetail saw before, have you? You're going to love the way a longer toothline in a lighter, yet longer saw makes for a far more accurate cut with fewer chances of dithering off course.
We designed an open-handled, thin (0.015) plate dovetail saw 10" long with just enough real estate below the back to facilitate longer, more precise dovetail cuts with fewer strokes to promote accuracy and efficiency with long rifle precision. 


Price: 224.00 (Including VAT at 20%)

Bad Axe 10

Quantity:  



Bad Axe 12" Stiletto (Hickory Handle)
Ref: BAD12-S-HICK


15ppi RIP.
0.018" Gauge Plate.
12" blade.
Depth of cut 1 3/4" at the heel, and cants to 1 5/8" at the toe.
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

Before designing my 12" hybrid dovetail/small tenon saw, I asked Bad Axe customers who like my company's facebook page what they thought. Virtually everyone clamored for a longer plate, citing a desire for more accuracy and control when sawing 3/4 up to 6/4 stock, where shorter saws fall--well, short. My new Bad Axe 12" hybrid dovetail/small tenon saw is the happy result. 


Price: 240.00 (Including VAT at 20%)

Bad Axe 12

Quantity:  



Bad Axe 12" Stiletto (Black Walnut Handle)
Ref: BAD12-S-BW


15ppi RIP.
0.018" Gauge Plate.
12" blade.
Depth of cut 1 3/4" at the heel, and cants to 1 5/8" at the toe.
Black-Oxided Carbon Steel Sawback.
Black Walnut Handle.
Regular Size Handle.
Brass Slotted Nuts. 


Price: 265.00 (Including VAT at 20%)

Bad Axe 12

Quantity:  



Bad Axe 12" Crosscut Carcass Saw
Ref: BAD12-C


14 ppi Crosscut.
0.020" Gauge Plate.
12" blade.
Depth of cut 3".
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

This is the saw you will want for fine work, whether ripping or cross-cutting small tenons, or for fine to medium crosscut work in general. 


Price: 264.00 (Including VAT at 20%)

Bad Axe 12

Quantity:  



Bad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet (Hickory Handle)
Ref: BAD14-B-HICK


14 ppi Hybrid.
0.018" Gauge Plate.
14" blade.
Depth of cut 2 1/8" at the heel, canting to 2" at the toe.
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

At 14" long and filed 14 ppi onto a thin .018-gauge plate, the Bayonet excels at virtually any carcase joinery requirement you'll care to throw at it, whether slicing tenon shoulders large and small, making a delicate long-span miter cut, sawing dadoes, cutting rabbets, or crafting a long sliding dovetail pin and tail. The Bad Axe Bayonet simply closes in and gets the job done with few strokes, better balance, and far greater accuracy. When paired with our 12" Stiletto Dovetail Saw, the Bad Axe Bayonet presents a comprehensive solution for any furniture project crafted by your own two hands.
 


Price: 264.00 (Including VAT at 20%)

Bad Axe 14

Quantity:  



Bad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet (Black Walnut Handle)
Ref: BAD14-B-BW


14 ppi Hybrid.
0.018" Gauge Plate.
14" blade.
Depth of cut 2 1/8" at the heel, canting to 2" at the toe.
Black-Oxided Carbon Steel Sawback.
Black Walnut Handle.
Regular Size Handle.
Brass Slotted Nuts. 


Price: 284.00 (Including VAT at 20%)

Bad Axe 14

Quantity:  



Bad Axe 14" Hybrid Sash Saw
Ref: BAD14-S


12 ppi Hybrid.
0.025" Gauge Plate.
14" blade.
Depth of cut 3 5/8".
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

This is where rugged durability and precision converge at a high level, especially when you're new to hand tools and you want the perfect starter saw that will never outlast its usefullness. It can be used as a larger carcase saw for cuts against the grain, or a medium-range tenon saw when you want to sink it up to the hilt when crafting tenon cheeks with the grain. It's just a great all-around size, and that's why Disston made so many back saws with the same specs well over a century ago that are still floating around on eBay today. 


Price: 280.00 (Including VAT at 20%)

Bad Axe 14

Quantity:  



Bad Axe 16" Hybrid Tenon Saw
Ref: BAD16-T


12 ppi Hybrid.
0.025" Gauge Plate.
16" blade.
Depth of cut 4".
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.

This is what the maker says:

Nicknames are assigned, not self-promoted, and Tom Fidgen calls this my 'Jack Saw.' This saw features a 4" deep x 16" long premium-grade Swedish spring steel sawplate, a firearms-grade, hot-blued carbon steel. Hands-down, the Jack Saw is my best seller. My advice to newcomers is to start out with this guy in 11 or 12 ppi filed x-cut or hybrid cut, and when you're ready to purchase a dedicated ripping saw, consider the Jack saw in 11 ppi rip or the 18" Beast in 10 ppi rip. 


Price: 275.00 (Including VAT at 20%)

Bad Axe 16

Quantity:  



Bad Axe 18" Large Tenon Saw 'Beast' (Hickory Handle)
Ref: BAD18-B-HICK


11 ppi Hybrid.
0.025" Gauge Plate.
18" blade.
Depth of cut 4 1/2".
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts.
 


Price: 290.00 (Including VAT at 20%)

Bad Axe 18

Quantity:  



Bad Axe 18" Large Tenon Saw 'Beast' (Black Walnut Handle)
Ref: BAD18-B-BW


11 ppi Hybrid.
0.025" Gauge Plate.
18" blade.
Depth of cut 4 1/2".
Black-Oxided Carbon Steel Sawback.
Black Walnut Handle.
Regular Size Handle.
Brass Slotted Nuts. 


Price: 310.00 (Including VAT at 20%)

Bad Axe 18

Quantity:  



Bad Axe 18" Roubo Beast Master
Ref: BAD18-RBM


9 ppi RIP.
0.0315" Gauge Plate.
18" blade.
Depth of cut 5".
Black-Oxided Carbon Steel Sawback.
American Hickory Handle.
Regular Size Handle.
Brass Slotted Nuts. 


Price: 300.00 (Including VAT at 20%)

Bad Axe 18

Quantity:  



Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
Ref: BAFSKP


What's included.....
30 1/2" Saw Plate & 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand.
Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt.
3" x 3/8" eyebolt with jam nut.
Striker Plate with fastening screws.
Two U-bolts to secure plate to brackets.

''All you have to do is cut and form the wooden components'' 


Price: 265.00 (Including VAT at 20%)

Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)

Quantity:  


 

 
Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement

© Classic Hand Tools Ltd | Company Registration No. 04764498 | VAT No. GB 818 111 455