Glenn Lucas 5/8'' Bar Bowl GougeGlenn Lucas 5/8'' Bar Bowl Gouge
Glenn Lucas 5/8'' Bar Bowl Gouge
The Glenn Lucas 5/8'' Bar Bowl Gouge with 16'' handle. This tool is great for the rough shaping of wet or dry bowls as well as refining work. The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
£92.00 inc VAT
Glenn Lucas Bowl GougesGlenn Lucas Bowl Gouges
Glenn Lucas Bowl Gouges
The Glenn Lucas Bowl Gouge - 3/8'' Round Bar (GL5S) or 1/2'' round bar (GL5) Both can be used for the finer cuts on both the inside and outside of a bowl. Handle is 16" for the GL5 and 14'' for the GL5S. The gouges feature a secondary bevel on the heel to give the tools some clearance when going around tight corners making concave curves or coves.
from £55.00 inc VAT

Glenn Lucas Finishing Bowl Gouge - 5/8'' Round BarGlenn Lucas Finishing Bowl Gouge - 5/8'' Round Bar
Glenn Lucas Finishing Bowl Gouge - 5/8'' Round Bar
Glenn Lucas Finishing Bowl Gouge - 5/8'' Round Bar Great tool for finishing the cuts on the bottom of the bowl inside. Handle is 16" in length. The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
£92.00 inc VAT
Glenn Lucas Heavy Duty Bowl Roughing GougeGlenn Lucas Heavy Duty Bowl Roughing Gouge
Glenn Lucas Heavy Duty Bowl Roughing Gouge
The Glenn Lucas 3/4'' Heavy Duty Bowl Roughing Gouge with a 16" handle. Ideal for rough shaping of unseasoned wood. The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
£124.00 inc VAT

Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)
Robert Sorby Fingernail Profile Bowl Gouges (Deep Flute)
The profile of this Robert Sorby Fingernail Profile Bowl Gouge increases the flexibility allowing a woodturner to perform "pull cuts" without catching the lathe bed. The greater cutting tip area allows for both delicate shearing cuts and for heavy profiling cuts.
from £54.00 inc VAT
Robert Sorby Standard Bowl Gouges (Deep Flute)Robert Sorby Standard Bowl Gouges (Deep Flute)
Robert Sorby Standard Bowl Gouges (Deep Flute)
The Robert Sorby standard bowl gouges are a must in the tool kit of every bowl turner. These tools are ideal for making bowls, capable of producing either massive profiling cuts or delicate finishing cuts as necessary.
from £54.00 inc VAT

Hamlet Bowl GougeHamlet Bowl Gouge
Hamlet Bowl Gouge
Milled from round bar. Every Hamlet bowl gouge is finely turned for making the best of turned bowls, for heavy profile cuts or delicate feather cuts.
from £38.00 inc VAT
Glenn Lucas 1/2'' Spindle GougeGlenn Lucas 1/2'' Spindle Gouge
Glenn Lucas 1/2'' Spindle Gouge
The Glenn Lucas Spindle Gouge - 1/2'' - the ideal tool for detailed spindle work and box making. Handle is 10" in length. The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
£37.00 inc VAT

Glenn Lucas 3/8'' Spindle GougeGlenn Lucas 3/8'' Spindle Gouge
Glenn Lucas 3/8'' Spindle Gouge
The Glenn Lucas 3/8'' Spindle Gouge used for detailed spindle work and box making. The handle is 10" in length. The gouge features a secondary bevel on the heel to give the tool some clearance when going around tight corners making concave curves or coves.
£31.00 inc VAT
Hamlet Spindle Roughing GougeHamlet Spindle Roughing Gouge
Hamlet Spindle Roughing Gouge
These are often simply referred to as roughing gouges but they are not to be used for roughing bowls. They are only for spindle work i,e roughing a square spindle to round.
from £46.00 inc VAT

Robert Sorby Spindle Roughing GougesRobert Sorby Spindle Roughing Gouges
Robert Sorby Spindle Roughing Gouges
Robert Sorby spindle roughing gouges are for initial turning of uneven or square stock to round. The shape of the roughing out gouge enables the tool to cut safely with the wings (the name given to the tips of the side walls) well back from the workpiece.
from £70.00 inc VAT
Hamlet Standard Spindle GougeHamlet Standard Spindle Gouge
Hamlet Standard Spindle Gouge
These are tools for working between centres on parallel grain. For beads, coves and profile work on vases, cups and shaped work.
from £26.00 inc VAT

Robert Sorby Standard Spindle GougesRobert Sorby Standard Spindle Gouges
Robert Sorby Standard Spindle Gouges
Robert Sorby spindle gouges are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. They are used to create coves, beads, and other profiles on goblets, vases and egg cups.
from £36.00 inc VAT
Robert Sorby Fingernail Profile Spindle GougesRobert Sorby Fingernail Profile Spindle Gouges
Robert Sorby Fingernail Profile Spindle Gouges
Robert Sorby fingernail profile spindle gouges are ideal for fine detailing on spindle work. The wing tips are ground back to reduce the danger of catching when working in confined areas.
from £40.00 inc VAT

Robert Sorby Long & Strong Spindle GougesRobert Sorby Long & Strong Spindle Gouges
Robert Sorby Long & Strong Spindle Gouges
Robert Sorby long and strong spindle gouges are the same as standard but with a longer blade allowing you additional reach into the workpiece.
from £52.00 inc VAT
Robert Sorby Continental Style Spindle GougesRobert Sorby Continental Style Spindle Gouges
Robert Sorby Continental Style Spindle Gouges
Robert Sorby continental style spindle gouges have a wonderful reputation for superb handling when doing spindle work.
from £45.00 inc VAT

Hamlet Detail Gouge
Hamlet Detail Gouge
Detail gouge for very fine point work between spindles.
from £31.00 inc VAT
Robert Sorby Spindlemaster - 812HRobert Sorby Spindlemaster - 812H
Robert Sorby Spindlemaster - 812H
The spindlemaster will create beads & coves as well as planing and trimming end grain. Taming the skew is perhaps the most common of problems encountered by the woodturner. The digs-ins which ensue from incorrect presentation cause many turners to avoid using the skew chisels and consequently reduce their skills and limit their opportunities of turning between centres. The new Spindlemaster...
from £50.50 inc VAT

Glenn Lucas 1'' Radius Edge Skew ChiselGlenn Lucas 1'' Radius Edge Skew Chisel
New
Glenn Lucas 1'' Radius Edge Skew Chisel
Glenn Lucas 1'' Radius Edge Skew Chisel which is used for planing cuts and detailed work on spindles. This is Glenn's preferred shape of skew chisel. The handle is 10" in length
£46.00 inc VAT
Hamlet Rolled Edge Radius Skew ChiselsHamlet Rolled Edge Radius Skew Chisels
Hamlet Rolled Edge Radius Skew Chisels
A combination of radius skew and rolled edge for steadiness on the tool rest without fear of drag.
from £34.00 inc VAT

Robert Sorby Standard Skew ChiselsRobert Sorby Standard Skew Chisels
Robert Sorby Standard Skew Chisels
Robert Sorby standard skew chisels are rectangular in section, giving this type of of skew more weight. This makes them superb for large spindle work e.g kitchen table legs and newel posts.
from £45.93 inc VAT
Hamlet Standard Skew ChiselHamlet Standard Skew Chisel
Hamlet Standard Skew Chisel
Made from flat rectangular bar heavier than oval section for turning on legs, posts etc.
from £29.00 inc VAT

Robert Sorby Oval Skew ChiselsRobert Sorby Oval Skew Chisels
Robert Sorby Oval Skew Chisels
Robert Sorby oval skew chisels have a profile that allows the tool to glide effortlessly along the tool rest. Use to smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and V-cuts, e.g stair ballustrading and chair legs.
from £45.93 inc VAT
Hamlet Oval Skew ChiselHamlet Oval Skew Chisel
Hamlet Oval Skew Chisel
Finely balanced tool designed to allow the tool ease of movement along the tool rest producing a clean fine finish without the fear of tool rest damage.
from £35.00 inc VAT

Hamlet Rolled Edge Skew ChiselsHamlet Rolled Edge Skew Chisels
Hamlet Rolled Edge Skew Chisels
A combination of flat skew and rolled edge for steadiness on the tool rest without fear of drag.
from £31.00 inc VAT
Glenn Lucas 3/4'' Square End ScraperGlenn Lucas 3/4'' Square End Scraper
Glenn Lucas 3/4'' Square End Scraper
Glenn Lucas 3/4'' Square End Scraper used for box making and chucking recesses. Handle is 10" in length
£39.41 inc VAT

Glenn Lucas French Curve ScrapersGlenn Lucas French Curve Scrapers
Glenn Lucas French Curve Scrapers
Glenn Lucas French Curve Scraper in various sizes 1 3/8'' x 3/8'' French Curve Negative Rake Scraper with 16'' handle ideal for refining the curves on bowls and platters 1 1/4'' x 5/16'' French Curve Scraper with a 16" length handle
from £46.62 inc VAT
Glenn Lucas Round Nose Negative Rake ScraperGlenn Lucas Round Nose Negative Rake Scraper
Glenn Lucas Round Nose Negative Rake Scraper
The Glenn Lucas Round Nose Negative Rake Scraper 1 3/8'' x 3/8'' with a 16'' handle Great for refining the curves on bowls and platters, very similar to the GL1 but shaped with a round nose.
£88.00 inc VAT

Robert Sorby Round Nose ScraperRobert Sorby Round Nose Scraper
Robert Sorby Round Nose Scraper
The Robert Sorby Round Nose Scraper is used on bowls and spindle work to create smooth flowing curves e.g goblets, egg cups, and inside boxes.
from £46.50 inc VAT
Hamlet Round Nose ScrapersHamlet Round Nose Scrapers
Hamlet Round Nose Scrapers
Hamlet round nose scrapers are used on concave surfaces such as bowls to leave you with a smooth finish.
from £29.00 inc VAT

Square End ScrapersSquare End Scrapers
Square End Scrapers
The Robert Sorby square end scrapers are used for finishing convex and flat bottomed forms. The end profile can be modified to a specific shape as required, eg diamond point.
from £46.50 inc VAT
Robert Sorby Curved ScraperRobert Sorby Curved Scraper
Robert Sorby Curved Scraper
The curved end profileof thie Robert Sorby Scraper makes this excellent for creating, smoothing and blending curved surfaces in bowl and spindle work, eg round bottomed boxes. This new tool is able to take an agressive cut, whilst retaining the butterfly sensitivity for the refining cuts. 3/4" Curved Scraper - 16" with handle
£54.00 inc VAT

Robert Sorby Diamond/Side Cut ScraperRobert Sorby Diamond/Side Cut Scraper
Robert Sorby Diamond/Side Cut Scraper
The Robert Sorby diamond/side cut scraper can be used on square bottomed boxes the end profiles allows the tool to create a right angled juncture between side wall and bottom. The 85º angle at the end prevents the tool from cutting th eside wall and the bottom at the same time. 3/4" Diamond/Side Cut Scraper - 16" with handle.
£57.00 inc VAT
Robert Sorby Heavy Duty - Bowl Finishing Inboard ScraperRobert Sorby Heavy Duty - Bowl Finishing Inboard Scraper
Robert Sorby Heavy Duty - Bowl Finishing Inboard Scraper
The Robert Sorby Heavy Duty Bowl Finishing Inboard Scraper is ideal for finishing bowls when working inboard. 1 1/2" (38mm) wide by 21" (525mm) overall length.
£115.00 inc VAT

Robert Sorby Heavy Duty - Bowl Finishing Outboard ScraperRobert Sorby Heavy Duty - Bowl Finishing Outboard Scraper
Robert Sorby Heavy Duty - Bowl Finishing Outboard Scraper
The Robert Sorby Heavy Duty Bowl Finishing Outboard Scraper is ideal for finishing when working in the outboard mode of the lathe. 1 1/2" (38mm) wide by 21" (525mm) overall length.
£115.00 inc VAT
Robert Sorby Heavy Duty - Full Round ScraperRobert Sorby Heavy Duty - Full Round Scraper
Robert Sorby Heavy Duty - Full Round Scraper
The Robert Sorby Heavy Duty Full Round Scraper is ideal for finishing on bowls and platters especially where a smooth curve is required. 1 1/2" (38mm) wide by 21" (525mm) overall length.
£115.00 inc VAT

Robert Sorby Round/Side Cut ScraperRobert Sorby Round/Side Cut Scraper
Robert Sorby Round/Side Cut Scraper
The Robert Sorby round/side cut scraper is designed for blending the parallel side wall and the curved bottom of vessels together. It is excellent for undercutting the rims of small bowls. 3/4" Round Side Cut Scraper - 16" with handle
£57.00 inc VAT
Robert Sorby Box ScraperRobert Sorby Box Scraper
Robert Sorby Box Scraper
The special cutting profile of this Robert Sorby box scraper makes it ideal for cutting the parallel side walls of end grain boxes. The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and the flat bottomed vessels. The profiles cause this to be very responsive and sensitive in use. 3/4" Box Scraper - 16" with handle
£53.00 inc VAT

Robert Sorby 1/16' Slim Parting ToolRobert Sorby 1/16' Slim Parting Tool
Robert Sorby 1/16' Slim Parting Tool
This Robert Sorby 1/16" handy parting tool is designed to give the cleanest and finest of cuts with the minimum of waste wood. Its 1¼" blade width eliminates the flexing and twisting normally associated with such a thin blade. The double bevel HSS cutting face gives the very finest of cuts. For added security the blade is seated and riveted deep into the handle.
£29.75 inc VAT
Hamlet 1/16' Parting Tool
Hamlet 1/16' Parting Tool
Parting tools are mostly used for cutting through or forming shoulders, and are essential in any workshop.
£28.00 inc VAT

Hamlet 3/16'' Diamond Parting ToolHamlet 3/16'' Diamond Parting Tool
Hamlet 3/16'' Diamond Parting Tool
The Hamlet diamond parting tool is not made from diamonds, sorry to disappoint! It refers to the diamond shaped profile which reduces friction, and therefore heat to avoid unwanted burn marks, or even splitting. The shape also reduces the risk of binding in the cut.
£45.00 inc VAT
Hamlet Parting ToolsHamlet Parting Tools
Hamlet Parting Tools
Parting tools are mostly used for cutting through or forming shoulders, and are essential in any workshop. The 1/8 parting tool (HCT 090) is a popular starter tool.
£34.00 inc VAT

Robert Sorby Standard Parting ToolsRobert Sorby Standard Parting Tools
Robert Sorby Standard Parting Tools
Robert Sorby standard parting tools are used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" (3mm) tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and fillets.
from £40.50 inc VAT
Hamlet Beading & Parting ToolsHamlet Beading & Parting Tools
Hamlet Beading & Parting Tools
These beading and parting tools are used primarily for forming beads and spigots, these tools can also perform the standard parting tool tasks such as cutting through and forming shoulders.
from £32.50 inc VAT

Robert Sorby Beading & Parting ToolRobert Sorby Beading & Parting Tool
Robert Sorby Beading & Parting Tool
The Robert Sorby beading and parting tool is a versatile tool used for parting off as well as producing beads. Its size makes it very stable, but also very sensitive in use. Ideal for creating the spigots to fit in a chuck. 3/8" Beading & Parting Tool - 18¾" with handle.
£47.50 inc VAT
Robert Sorby Bedan Parting ToolRobert Sorby Bedan Parting Tool
Robert Sorby Bedan Parting Tool
The Robert Sorby bedan parting tool is used in the same way as the beading and parting tool the relieved side bevel allows the tool to plunge cut in bowls and boxes with little risk of binding. 3/8" Bedan Parting Tool - 18¾" with handle.
£55.50 inc VAT

Robert Sorby Diamond Section Parting ToolRobert Sorby Diamond Section Parting Tool
Robert Sorby Diamond Section Parting Tool
The special profile of this Robert Sorby diamond section parting tool reduces the risk of binding in the cut. It also reduces the amount of heat build up caused by friction, thereby reducing the chance of burning the bottom of the parted project. 3/16" Diamond Parting Tool - 17" with handle.
£73.50 inc VAT
Robert Sorby Fluted Parting ToolRobert Sorby Fluted Parting Tool
Robert Sorby Fluted Parting Tool
This Robert Sorby fluted parting tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. The long bevel has a milled flute which is the cutting face. The small bevel his the sharpening face. When parting off, this unique arrangement causes...
£60.00 inc VAT
Page: 1 | 2 |