Classic Hand Tools

View Cart
   HomeShowsVisit UsAbout UsShippingLinksContact Us
Like us on FacebookFollow us on TwitterRead our Blog
 
 
 
     
   
     

    Secure Online Shopping
   
 

Secure Online Shopping
Online Catalogue >  Shop by Manufacturer  >  Manufacturers N-Z  >  Veritas  >  Veritas Saws and Saw Guides




Veritas Dovetail, Crosscut and Flush Cutting Saws

Veritas Dovetail and Crosscut Saws - These saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art materials.

Each saw has a spine moulded from an advanced material incorporating stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. An over-moulded blade and stainless-steel handle-mounting bolt creates a solid one-piece blade/spine/mount assembly. A single brass fastener secures the bubinga handle. Made of high-carbon steel, the blade of each is 9-1/4" long and 0.020" thick, with a cut depth of about 1-9/16". All three are 14-1/4" long overall. Comfortable, well-balanced saws.
Veritas Small Crosscut Saw Ref: VT0601

Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.


Prices include VAT 


Price: £58.96 (Including VAT at 20%)


Veritas Small Crosscut Saw

Quantity:  


Veritas Dovetail Saw Ref: 05T0501

When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw....

The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates all of the critical characteristics of a classic fine joinery saw, yet is executed using modern production processes and state-of-the-art materials.

The 9-1/4" long, 0.020" thick high-carbon steel blade features 14 rip-cut teeth per inch, having 0.003" of set per side. The teeth have a rake angle of 14°, and an included angle of 60°. Depth of cut is about 1-9/16".

What really stands out is the revolutionary spine; it is injection moulded under high pressure using an advanced material, incorporating stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder.

The blade and stainless-steel handle-mounting bolt are completely over-moulded, creating a solid one-piece blade/spine/mount assembly. A single brass fastener secures the bubinga handle, the shape of which has been derived from antique saws in the Lee Valley collection.

The saw has excellent balance, cuts easily and true, and has a comfortable pistol grip that makes the saw feel as if it’s an extension of your arm. Measures 14-1/4" long overall. 


Price: £58.96 (Including VAT at 20%)


Veritas Dovetail Saw

Quantity:  


Fine Cut Dovetail Saw (20tpi) Ref: 05T0505

Best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury.
 


Price: £58.96 (Including VAT at 20%)


Fine Cut Dovetail Saw (20tpi)

Quantity:  


Veritas Flush Cutting Saws Ref: VK3

Traditionally used for the rapid trimming of plugs and dowels flush with a surface, the Veritas flush-cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face. This is possible because the teeth are set one way only

The 22 tpi Japanese tooth-pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is cutting next to. The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.

The saw is available with teeth cut on only one edge or in a double-edged style that cuts from either side. Each is about 11-1/2" long with 4-3/4" of blade. These work like a charm.
 




Veritas Flush Cutting Saws

Quantity:  


Veritas Flush Cutting Saws
Veritas Flush Cutting Saw Single Edge - VK3401 £20.75
Veritas Flush Cutting Saw Double Edge - VK3601 £24.46


Veritas Dovetail Saw and Guide Ref: VT0203

Hand-cut dovetails remain the mark of the skilled cabinetmaker and a feature that buyers look for in high-end furniture. Veritas has developed a guide and saw system that lets amateurs achieve professional results. The system also allows the seasoned expert to produce dovetail joints more quickly and with less effort.
The Veritas dovetail guides, which clamp in position, hold the saw at the correct place and the correct angle for a perfect cut. 3/4" rare-earth magnets embedded in the anodized aluminum guide and covered with a layer of low-friction UHMW plastic keep the saw perfectly aligned as you cut. You still have to chop out waste from the tails and pins, but the detailed instructions give you tips on how to do this quickly and accurately.

Clamping capacity of the guides covers material from 1/4" to 1" thick.

The guide can be used with any backless saw that has approximately 0.005" of tooth set, but work best with the Veritas dovetail saw that has been designed specifically for them. The 2" x 8-1/2" blade has 22 tpi and 0.005" of tooth set. The dozuki tooth form is effective in both crosscuts and rip cuts.  




Veritas Dovetail Saw and Guide

Quantity:  


Veritas Dovetail Saw and Guide
Veritas Dovetail Saw £21.76
Veritas Dovetail Saw plus 1:8 (Hardwood) Guide - VT0302 £63.50
Veritas 1:8 (Hardwood) Guide Only - 05T0202 £46.99


Veritas Crosscut Carcass Saw Ref: VT0701

The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the grip makes for a comfortable and secure grip. Overall length 415mm (16.1/4").

Price incl VAT 


Price: £58.96 (Including VAT at 20%)


Veritas Crosscut Carcass Saw

Quantity:  


Veritas Rip Cut Carcass Saw Ref: VT0705

The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece blade/spine/mount assembly. The material used for the back incorporates stainless-steel powder for weight, glass fibre for stiffness, and a polymer resin binder. A brass nut fastener secures the comfortably shaped Bubinga handle. The saw has great balance it cuts easily, stays true and the grip makes for a comfortable and secure grip. Overall length 415mm (16.1/4").

Price incl VAT 


Price: £64.50 (Including VAT at 20%)


Veritas Rip Cut Carcass Saw

Quantity:  


Veritas Magnetic Saw Guides Ref: V-95295

This anodised aluminium guide helps keep your saw on the right track and perpendicular to a workpiece. It provides a registration surface about 32mm tall. It is particularly useful when crosscutting tenon shoulders or the edges of a dado, which is where you want your saw to cut straight and true. You can hold the guide onto your workpiece with a hand or secure it with clamps.

The machined reference surface has three embedded magnets and a covering of UHMW low friction material. The magnets help keep your saw in contact with the guide while the pad allows it to glide along the reference face. The bottom of the guide has two high friction strips to resist slipping on a surface. It also has a T-slot to accept a pair of 50mm capacity clamps (optional accessory).

The guide is available in 200 or 350mm lengths.

Price incl VAT 




Veritas Magnetic Saw Guides

Quantity:  


Veritas Magnetic Saw Guide - 200mm £29.99
Veritas Magnetic Saw Guide - 350mm £38.26


Veritas Saw Guide Clamps (pair) Ref: VJ5009

These 50mm capacity clamps are anodised aluminium with solid brass screws and pads. They fit into the T-slot on the underside of the saw guide leaving the upper surface clear. These clamps ensure the guide is secure and firmly held in place resulting in a higher degree of accuracy.

Price incl VAT 


Price: £41.30 (Including VAT at 20%)


Veritas Saw Guide Clamps (pair)

Quantity:  


Veritas Gent's Saws Ref: V-95290

Sharing the same, advanced materials as the Veritas dovetail and carcass saws, these Gent’s saws have 200mm long high-carbon steel blades just 0.4mm thick with 0.08mm of teeth set per side.

The 20tpi ripsaw has teeth with a 14" rake angle and a 60° included angle.

The teeth on the 22tpi crosscut saw have a rake angle of 15°, an included angle of 60° and alternating 15° bevel angles so that they sever rather than tear wood fibres.

Both saws have a cut depth of 41mm. For strength and rigidity, the glass and stainless steel-filled polymer spine is moulded over the blade and handle stud. A brass nut secures the Bubinga handle to the blade.

Price incl VAT 




Veritas Gent's Saws

Quantity:  


Veritas Gents Saw - Rip Cut £53.95
Veritas Gents Saw - Cross Cut £53.95


 

Online Catalogue >  Shop by Manufacturer  >  Manufacturers N-Z  >  Veritas  >  Veritas Saws and Saw Guides