Lie-Nielsen Tongue & Groove Plane - 3/4"
Lie-Nielsen Tongue & Groove Plane - 3/4"
The Lie-Nielsen Tongue & Groove plane cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed. Comes with a 3/16'' (4.8mm) thick A2 steel...
£329.00 inc VAT
Lie-Nielsen Chisel Plane
Lie-Nielsen Chisel Plane
The Lie-Nielsen Chisel Plane is the perfect little tool (6½" x 1¾") for removing glue and trimming dowel plugs. It is very useful for working into corners and to the ends of rebates. The heavy 3/16" thick blade is set at 12 degrees. You adjust the depth of the cut by a nicely machined knurled knob. American cherry handle. !!!!
£199.00 inc VAT

Lie-Nielsen Scrub Plane
Lie-Nielsen Scrub Plane
This plane is based on the Stanley 40 1/2 and is designed to remove large quantities of wood quickly e.g taking rough-sawn boards down to size, before finishing with a Jack Plane and a Smoothing Plane. It is also useful practical for shaping irregular objects or creating an interesting finished surface. The Lie Nielsen Scrub Plane has a cast Iron body, 10¼" long. The blade is massive...
£275.00 inc VAT
Lie-Nielsen No.40B Butt Mortice Plane
Lie-Nielsen No.40B Butt Mortice Plane
The Butt Mortice is a simple to use plane that produces precise mortices of uniform depths with sharp, square corners. The body is cast iron with a bronze blade cap, and the handles are polished cherry. The sole has a long slot that gives a clear view of your work and allows for quick removal of shavings. The plane measures 9 3/4" x 1", with a 3/4" wide blade.
£210.00 inc VAT

Lie-Nielsen No.95 Edge Trimming Block Plane (Right Hand)
Lie-Nielsen No.95 Edge Trimming Block Plane (Right Hand)
The Lie-Nielsen Edge Trimming plane is based on Stanley's No.95 plane, but you get the added choice of either right or left handed versions. It has a fixed fence that holds the iron at a 90 degree angle against the edge of a board. For boards up to about ¾" wide, this tool is a very convenient way to get square edges. Precision machined from a manganese bronze casting. !!!!
£269.00 inc VAT