Ashley Iles MKII Bench ChiselsAshley Iles MKII Bench Chisels
Ashley Iles MKII Bench Chisels
These Ashley Iles MKII bench chisels are so attractively priced - how do they do it? These MKII chisels are a great improvement upon the original MKI's. Hardened O1 high carbon steel with slim tapered blades which gives you access to tight spaces. The backs are also ever so slightly concave (a few thousands of an inch!) This is designed to help with sharpening. Padauk handles with brass ferules. Set...
from £30.00 inc VAT
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 Bevel Edge Chisels
Lie-Nielsen A2 bevel edge chisels - these will hold their edge longer than high carbon chisels and therefore require less frequent sharpening. The chisel edges are square, parallel along the length, and very narrow so you can get into tight places. The backs are ground flat and finished by hand at 400 grit. The bevel is flat ground at 30°, but a higher secondary bevel (about 35°) is advisable,...
from £99.95 inc VAT

Narex Richter Bevel Edge ChiselsNarex Richter Bevel Edge Chisels
Narex Richter Bevel Edge Chisels
Until recently we stocked the Narex 8116 range of bevel edge chisels which were popular amongst students and people starting out in woodworking. Most importantly the steel in the 8116 range was very good but in our opinion the balance and feel would sometimes let them down. I'm glad to say that this new premium range 8150 from Narex is a massive improvement upon the old chisels. Yes they are not...

5

from £33.00 inc VAT
Veritas PM-V11 Bench ChiselsVeritas PM-V11 Bench Chisels
Back In Stock
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...

5

from £94.50 inc VAT

Pfeil Carpenter Chisels
Pfeil Carpenter Chisels
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels. The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished. Bevel angle 25°, razor sharp. 4mm wide to 40mm wide. Overall length 240-260mm.

5

from £23.00 inc VAT
Robert Sorby Gilt Edge Chisels - Rosewood
Last Ones!
Robert Sorby Gilt Edge Chisels - Rosewood
Gilt Edge chisel with rosewood carver handle. Fitted with a tapered brass ferrule for comfort and elegance. These are being discontinued due to the difficulties of obtaining the rosewood.
from £41.99 inc VAT

Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. Fitted with a tapered brass ferrule for comfort and elegance.
from £40.62 inc VAT
Robert Sorby Octagonal Handled Bevel Edged Chisel
Robert Sorby Octagonal Handled Bevel Edged Chisel
Octagonal boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127 - 178mm
from £46.00 inc VAT

Robert Sorby Traditional Bevel Edged Chisel
Robert Sorby Traditional Bevel Edged Chisel
Traditional "carver" style boxwood handle with brass ferule and leather washer. Overall Size 265 - 340mm Blade Length 127-178mm
from £32.69 inc VAT
Lie-Nielsen Set of 5 Bevel Edge Chisels
Lie-Nielsen Set of 5 Bevel Edge Chisels
The ever popular Lie-Nielsen A2 bevel edge chisels as a set. The most popular 5 sizes are included - 1/4", 3/8", 1/2", 3/4", 1". This does not include a tool roll.
£490.00 inc VAT

Blue Spruce Optima Bench Chisels - Set of 4Blue Spruce Optima Bench Chisels - Set of 4
New
Blue Spruce Optima Bench Chisels - Set of 4
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work. Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
£429.00 inc VAT
Blue Spruce Optima Bench Chisels - Set of 6Blue Spruce Optima Bench Chisels - Set of 6
New
Blue Spruce Optima Bench Chisels - Set of 6
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work. Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
£659.00 inc VAT

Blue Spruce Optima Bench Chisels - Set of 9Blue Spruce Optima Bench Chisels - Set of 9
New
Blue Spruce Optima Bench Chisels - Set of 9
Blue Spruce Toolworks new Optima Chisels feature a lapped and polished back with a flatness measured in light bands (the same system used to measure silicon wafers). When you unbox your new Optima Chisels, they’re razor sharp and 100% ready to go to work. Each Optima Chisel is machined from A2 tool steel, then double-tempered and cryogenically treated. The tempering and cryo treatments result...
£980.00 inc VAT
Henry Taylor Bevel Edge ChiselsHenry Taylor Bevel Edge Chisels
Henry Taylor Bevel Edge Chisels
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles and brass ferrules. Made in Sheffield, England for over 150 years. F55 - 1/4" (6mm) F56 - 3/8" (9mm) F57 - 1/2" (12mm) F59 - 3/4" (19mm) F60 - 1" (25mm)
from £24.00 inc VAT

Oire Nomi Suminagashi Japanese Chisel
Oire Nomi Suminagashi Japanese Chisel
Overall length 220mm (blade 60mm) These chisels are made from blue steel in the Sanjo region of Japan. They are blacksmith made chisels and will require some fettling (i.e the cutting edge might need to be squared up, but nothing major!), but once this is done you will have a chisel for life. Finding a honing guide that will fit Japanese chisels is somewhat troublesome, we have tested most of our...
from £120.00 inc VAT
Robert Sorby Set of 5 Gilt Edge Chisels - Satinwood
Robert Sorby Set of 5 Gilt Edge Chisels - Satinwood
Robert Sorby Gilt Edge chisel with Satinwood handle. This set of 5 comes in a wooden presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1'' Fitted with a tapered brass ferrule for comfort and elegance.
£249.00 inc VAT

Pfeil Carpenter Chisel SetsPfeil Carpenter Chisel Sets
Pfeil Carpenter Chisel Sets
Introduced in 2010 from Switzerland, Pfeil Carpenters Chisels have strong Elm wood octagonal handles with an oval section. We prefer these to the bench chisels. The blades are forged from K 510 steel, hardened up to 60 RC. Bevel edged with well marked facets. The blades are finely ground and polished. Bevel angle 25°, razor sharp. 4mm wide to 40mm wide. Overall length 240-260mm. The...
from £129.50 inc VAT
Pfeil Bench Chisel Set
Pfeil Bench Chisel Set
Set of 6 Pfeil Bench chisels in a beechwood case. Widths included are 6mm, 10mm, 12mm, 16mm, 20mm and 26mm.
£174.00 inc VAT

Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal Handled Bevel Edged Chisels
Robert Sorby Set of 5 Octagonal boxwood handled Bevel Edge Chisels with brass ferule and leather washer in a cardboard presentation box. Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels Overall Size 265 - 340mm Blade Length 127 - 178mm
£222.00 inc VAT
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Robert Sorby Boxed Set of 5 Traditional Bevel Edged Chisels
Set of 5 Robert Sorby Traditional "carver" style chisels with boxwood handle, brass ferule and leather washer in a cardboard presentation box. Includes 1/4'', 3/8'', 1/2'', 3/4'' and 1'' chisels Overall Size 265 - 340mm Blade Length 127-178mm
£189.00 inc VAT

Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Back In Stock
Robert Sorby Set of 5 Gilt Edge Chisels - Boxwood
Robert Sorby Gilt Edge chisel with boxwood carver handle. This set of 5 comes in a cardboard presentation box and includes the following sizes: 1/4'', 3/8'', 1/2'', 3/4'' and 1'' Fitted with a tapered brass ferrule for comfort and elegance.
£231.00 inc VAT
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
Henry Taylor Short Cranked Bevel Edged Chisels Set of 4
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
£189.00 inc VAT

Henry Taylor Bevel Edge Chisels Set of 5Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor Bevel Edge Chisels Set of 5
Henry Taylor standard bevel edge chisels. The blade length is approx 5" (125mm) with stained hardwood handles with brass ferrules. Made in Sheffield, England for over 150 years. F55 - 1/4" (6mm) F56 - 3/8" (9mm) F57 - 1/2" (12mm) F59 - 3/4" (19mm) F60 - 1" (25mm) As recommended by Simon Frost in September 2021 issue of The Woodworker. Supplied with a...

5

£120.00 inc VAT
Henry Taylor Short Cranked Bevel Edged ChiselsHenry Taylor Short Cranked Bevel Edged Chisels
Henry Taylor Short Cranked Bevel Edged Chisels
These Henry Taylor shorter 4½" blades are easier to control than the standard longer models. Their offset handle design keeps the blades perfectly flat on the workpiece and your hands out of the way, improving cutting accuracy and making work in confined spaces much easier.
from £45.50 inc VAT

Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket ChiselLie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen 1 1/2'' (38mm) Bevel Edge Socket Chisel
Lie-Nielsen have gone big! After many years of it being discussed we have 1-1/2'' version of their beloved chisels. The Lie-Nielsen Chisels are based on the Stanley 750 Bevel Edge Socket Chisels. Socket chisels are not common these days, perhaps because they are expensive to make, but Stanley and others once produced these chisels in a vast array. Socket chisel handles are less likely to...
£157.00 inc VAT