Bad Axe 12" StilettoBad Axe 12" Stiletto
Bad Axe 12" Stiletto
The Bad Axe Stiletto is a dedicated dovetail saw. You might think you need a short 8" dovetail saw to cut your finest pins, but actually the Stiletto at 12" will make for longer (and therefore fewer) cuts, which promotes more accuracy. The extra length is balanced beautifully by a shallow blade so it feels right in the hand. Bad Axe Tool Works takes the finest materials and pairs it with...
£287.00 inc VAT
Rob Cosman 3/4 Dovetail SawRob Cosman 3/4 Dovetail Saw
Rob Cosman 3/4 Dovetail Saw
Cutting tiny dovetails (dovetails in 3/8 inch and less thick stock) is a bit challenging if using Rob's regular sized dovetail saw - it can be done, but I wanted a better saw for this application. That is why he designed his 3/4 dovetail saw. As compared to Rob's regular-sized dovetail saw, the 3/4 dovetail saw's thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall...
£255.00 inc VAT

Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen Dovetail Saw with Cherry Handle
Lie-Nielsen believe that their Back Saws are the finest made anywhere. They are an exact copy of a British saw made in 1830. Owning one is like having a piece of woodworking history in your shop. Since dovetailing is a ripping operation, where the kerf is running with the grain, the Lie-Nielsen Dovetail Saw has its teeth filed to a rip profile, unlike other dovetail saws on the market today. Solid...
£185.00 inc VAT
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen Tapered Dovetail Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
£185.00 inc VAT

Veritas Dovetail SawVeritas Dovetail Saw
Veritas Dovetail Saw
When we first saw this saw (!) we were a bit dubious but it has quickly grown on us. It is very comfortable. it is very affordable, it cuts well and can be re-sharpened. Not for the purists maybe but beauty is in the eye of the beholder. This is what those clever chaps from Veritas say about this saw.... The Veritas dovetail saw is an innovative blend of tradition and technology. It incorporates...
£86.50 inc VAT
Veritas Fine Cut Dovetail Saw (20tpi)
Veritas Fine Cut Dovetail Saw (20tpi)
The Veritas Fine Cut Dovetail Saw (20tpi) is best for stock of less than half an inch thick, this finer version of the standard Dovetail saw would complement your existing saw armoury. The Veritas dovetail saws are an innovative blend of tradition and technology, incorporating the critical characteristics of a classic fine joinery saw but made using modern production processes and state-of-the-art...
£89.95 inc VAT

Rob Cosman Dovetail Saw - Ebony Resin HandleRob Cosman Dovetail Saw - Ebony Resin Handle
Rob Cosman Dovetail Saw - Ebony Resin Handle
Rob describes the first of his hand saw offerings, the dovetail saw. After teaching thousands of folks to cut dovetails by hand, Rob has tailored a saw to address the most common problems. With the intent to enable woodworkers to assemble their dovetails straight from the saw this may very well be the missing link! Unique features include: Split lines with the Super Fine 22tpi starting tip,...
£265.00 inc VAT
Thomas Flinn Pax 1776 Dovetail Saw
Back In Stock
Thomas Flinn Pax 1776 Dovetail Saw
Available in lengths 8", 10" and 12" with 20tpi, in Rip (for cutting with the grain). Blade depths are as follows: 8" Blade length = Blade depth 2" 10" Blade length = Blade depth 2" 12" Blade length = Blade depth 2 1/2" These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The dovetails saws are beautifuly...
from £172.00 inc VAT

Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
Thomas Flinn Pax Beech Handled Dovetail & Tenon Saws
The Pax range of saws are made by Thomas Flinn & Co in Sheffield, England. They perform like the 1776 premium range, just don't have all the refinery. So instead of an open Walnut handle, these saws have a closed handle made from steamed Beech with a two-tone gloss finish. They have the same heavy brass back which is folded to give the blade its tension. If you like a heavier saw, then this...
from £90.00 inc VAT
Veritas Small Crosscut SawVeritas Small Crosscut Saw
Veritas Small Crosscut Saw
Used for cutting across or perpendicular to the grain, the 16 tpi crosscut saw blade has teeth filed with alternating bevel angles so it severs rather than tears wood fibers; it tracks better and leaves a smoother finish than a rip-cut blade. The teeth are filed with 15° rake and bevel angles and have 0.003" of set per side.
£92.50 inc VAT

Lie-Nielsen Carcass Saw with Cherry Handle
Lie-Nielsen Carcass Saw with Cherry Handle
The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado. It has 14 points per inch, filed crosscut, for cutting quickly, yet accurately and smoothly. Blade is .020" (.5mm) thick, with a .003" (.076mm) set. Overall length, including handle, is 19" (48.26cm), with an overall height of 4-7/8" (12.38cm). Usable blade dimensions are 14"...
£185.00 inc VAT
Lie-Nielsen Tapered Carcass Saw with Cherry HandleLie-Nielsen Tapered Carcass Saw with Cherry Handle
Lie-Nielsen Tapered Carcass Saw with Cherry Handle
This is the tapered version of the ever popular carcass saw. The taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. The tapered saw is very similar to the standard carcass saw in size, but has a thinner plate of .015". It tapers 1/4"...
£185.00 inc VAT

Rob Cosman Bench Crosscut SawRob Cosman Bench Crosscut Saw
Rob Cosman Bench Crosscut Saw
Every hand-tool woodworker needs a minimum of three backsaws: Dovetail, Tenon, and Crosscut Saws. Rob has designed and manufactured two different professional crosscut saws; his Joinery Crosscut and Bench Crosscut to meet this requirement. Both of Robs crosscut saws are specialized for crosscutting applications. The Bench Crosscut Saw is designed for general crosscutting while his Joinery Crosscut...
£310.00 inc VAT
Veritas Crosscut Carcass Saw
Veritas Crosscut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed crosscut at 14tpi. The teeth have a rake angle of 15°, an included angle of 60° with alternate 15° bevels to efficienlty sever wood fibres rather than tear. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid...
£95.00 inc VAT

Veritas Rip Cut Carcass Saw
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm. The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
£96.95 inc VAT
Bad Axe 14" Hybrid Thin Plate Carcass Saw - The BayonetBad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet
Back In Stock
Bad Axe 14" Hybrid Thin Plate Carcass Saw - The Bayonet
The ''Bayonet'' - yet another strange name from Bad Axe Tool Works, but don't let that put you off. This carcass saw will excel at virtually any carcase joinery you throw at it. The hybrid-cut filing gives you a saw that will give you plenty of opportunities to put it to good use. Bad Axe Tool Works takes the finest materials and pairs it with great craftsmanship to produce...

5

£305.00 inc VAT

Rob Cosman Joinery Crosscut Saw - Ebony Resin HandleRob Cosman Joinery Crosscut Saw - Ebony Resin Handle
Rob Cosman Joinery Crosscut Saw - Ebony Resin Handle
Unique features of Rob’s joinery crosscut saw include; with only .002 set per side this 15tpi saw will slice through wood and leave a ready-to-join surface, right out of the box! you have a choice, we saw, shape, sand and buff to a satin finish, "ebony resin" composite handles with carved finger recesses for extra comfort and control. the extra heavy brass back provides perfect...

5

£270.00 inc VAT
Thomas Flinn Pax 1776 Tenon Saws
Thomas Flinn Pax 1776 Tenon Saws
Available in lengths 10" and 12" with 13 or 15 tpi, in either Rip (for cutting with the grain) or Crosscut (for cutting across the grain) formation. Blade depths are as follows: 10" Blade length = Blade depth 2" 12" Blade length = Blade depth 2 1/2" These Pax 1776 saws are the premium range made by Thomas Flinn & Co in Sheffield, England. The tenon saws are...
from £172.00 inc VAT

Lie-Nielsen 16" Tenon Saw with Cherry Handle
Lie-Nielsen 16" Tenon Saw with Cherry Handle
A Tenon Saw is a large backsaw used for making deep, accurate cuts in furniture joinery. It should make straight, fast cuts without binding. Based on a classic Henry Disston model from the early 20th century, our Tenon Saws have Cherry handles, Brass fittings, and stout ¾" x ¼" milled Brass backs. These saws are solid, well balanced and smooth cutting. Filed rip for cutting...
£263.00 inc VAT
Lie-Nielsen Tapered Tenon Saw with Cherry Handle
Lie-Nielsen Tapered Tenon Saw with Cherry Handle
Lie-Nielsen have redesigned their three most popular back saws to feature a slight tapering of the blade from toe to heel. This taper gives you better control over precise cuts. When you reach the gauge line on the front of your stock, the blade is slightly above the line on the back side, which reduces the risk of sawing past your line. In addition, the taper introduces an angled approach to your...
£263.00 inc VAT

Rob Cosman Large Tenon Saw - Rip Cut - Ebony Resin HandleRob Cosman Large Tenon Saw - Rip Cut - Ebony Resin Handle
Rob Cosman Large Tenon Saw - Rip Cut - Ebony Resin Handle
Unique features include; Start the kerf easily with the Super Fine 20 tpi starting tip, then gain the speed you need for heavy cuts with the 12 tpi blade - we eased the angle of the cutting face a few degrees to reduce the grabbing that accompanies larger saw teeth. Very slight .002” (per side) set makes for dead straight saw cuts and smooth ready to glue surfaces - the blade is 12 inches...
£315.00 inc VAT
Veritas Tenon SawsVeritas Tenon Saws
Veritas Tenon Saws
The unique designs of the Veritas carcass saws and dovetail saws have proved to be extremely popular and Veritas have now introduced two superb tenon saws to complement their range. They combine the best characteristics of this fine classic joinery saw with those of state-of-the-art materials and construction methods. The tooth pattern on the thin high-carbon steel blade provides a good balance...
£148.00 inc VAT

Thomas Flinn Pax Hand Saws
Thomas Flinn Pax Hand Saws
Handcrafted of the finest alloy steel these saws are taper ground and breasted (meaning less teeth are in contact with the wood and therefore less friction) and are precisely set and sharpened by hand to ensure the best possible cut without binding. The handle is made from the finest steamed beech with a two-tone gloss finish. With a variation of teeth sizes, there is a Handsaw for every type of...
from £105.00 inc VAT
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
Bad Axe Frame Saw and Kerfing Plane Hardware Kit (no wood)
What's included..... 30 1/2" Saw Plate and 10" Kerfing Plane Plate. Blue Tempered 1095 Spring Steel. Hammer-set and sharpened by hand. Two brackets (with kerf pre-cut), one of which is tapped for the 3/8" eye bolt. 3" x 3/8" eyebolt with jam nut. Striker Plate with fastening screws. Two U-bolts to secure plate to brackets. ''All you have to do is cut and form the wooden components.''
£230.00 inc VAT

Knew Concepts 5'' Fret Saw with Screw Tension
Back In Stock
Knew Concepts 5'' Fret Saw with Screw Tension
The screw tension saw was the origin of the Knew Concepts Fret saw line. It is the economy model. It provides extremely precise blade tensioning simply by turning the knurled tension nut at the top of the frame. Saws come with a dozen Pegas Skip #7 Tooth blades (15 TPI).
£72.00 inc VAT
Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever TensionKnew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension
Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension
The Knew Concepts Mk. IV saws are designed to pull 50-60lbs of tension on their blades, which makes it much stronger, and the blades vibrate less than the standard saws. These saws are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant. The Cam Lever Tension is designed for...
from £96.00 inc VAT

Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension & Swivel Blade ClampsKnew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension & Swivel Blade Clamps
Back In Stock
Knew Concepts Mk.IV Heavy Duty Fret Saw with Lever Tension & Swivel Blade Clamps
The Knew Concepts Mk. IV Fret Saws are designed to pull 50-60lbs of tension on their blades, which makes it much stronger, and the blades vibrate less than the standard saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red, with a laser engraved logo and is extremely scratch and damage resistant. The Cam Lever...
from £120.00 inc VAT
Knew Concepts 6 1/2'' Coping Saw
Knew Concepts 6 1/2'' Coping Saw
On the Knew Concepts Coping Saw the blade is tensioned by a cam-lever and pulls so taut that the blade "sings" when plucked. Chris Schwarz said "...it's more like sawing with an unbendable wire than a floppy steel hotdog (which is what is typical of most saws)". Make turns that are tighter than ever before. The solid steel indexing blade-hooks lock in eight 45° positions...
£170.00 inc VAT

Knew Concepts Birdcage Titanium Fret Saw with Lever TensionKnew Concepts Birdcage Titanium Fret Saw with Lever Tension
Knew Concepts Birdcage Titanium Fret Saw with Lever Tension
The Knew Concepts Birdcage Titanium Fret Saw is the strongest, most rigid Fret Saw available on the market today! Its spine is a welded titanium beam, the blade is tensioned with a Lever that can tension blades so tight they "ping" with notes never heard before, makes turns that are tighter than ever before, and the blade clamps lock at 45° left, 0°, 45° right. Saws come with...
from £225.00 inc VAT
Knew Concepts Slip-on Foam Comfort Grip
Back In Stock
Knew Concepts Slip-on Foam Comfort Grip
The foam grips are available only for the Knew Concepts Mk.III, Mk.IV, and titanium hand saws. The simplest way to reduce the stress on your hands of long hours of sawing is to increase the diameter of the saw’s handle. This is where the Knew Concepts new Comfort Grips come in: they increase the diameter of the saw’s handle without adding weight, while they also make the handle...
£6.00 inc VAT

Classic Series - Japanese Saw Set (4 saws)
Classic Series - Japanese Saw Set (4 saws)
Set of 4 Japanese Saws in linen roll: Ryoba 240mm Kataba 220mm Kataba 300mm Douziki 240mm
£140.00 inc VAT
Replacement Blade for Douzuki Classic SawReplacement Blade for Douzuki Classic Saw
Replacement Blade for Douzuki Classic Saw
A replacement blade for the Douzuki Classic dovetail saw. 0.3mm thick blade with very fine back teeth. Especially suitable for cutting tenon shoulders and precise wood joints.
from £15.00 inc VAT

Replacement Blade for Douzuki Gold SawReplacement Blade for Douzuki Gold Saw
Replacement Blade for Douzuki Gold Saw
Replacement blade for the Douzuki Gold Saw. These blades are robust and with usual wear they should last a long time. More care must be taken with the thinnest blade such as the Douzuki 150 & 210 saws which are designed for very fine cuts. A choice of 4 sizes Douzuki Gold 150 - 150mm blade - 0.2mm thick, spacing 0.83mm, setting 0.35mm WDG150 - A very fine 150mm long blade. Douzuki Gold...
from £19.00 inc VAT
Replacement Blade for Fujiyama Douzuki 240mm Folding Saw
Replacement Blade for Fujiyama Douzuki 240mm Folding Saw
Replacement blade for the Fujiyama Douzuki 240mm Folding Saw. Blade 0.3mm thick. Spacing 1.5mm for cross cut and rip cut.
£21.00 inc VAT

Replacement Blade for Fujiyama Kataba 250mm Folding Saw
Replacement Blade for Fujiyama Kataba 250mm Folding Saw
Blade 0.5mm thick Spacing 1.36mm for cross cut
£15.00 inc VAT
Replacement Blade for Fujiyama Ryoba 240mm Folding Saw
Replacement Blade for Fujiyama Ryoba 240mm Folding Saw
Blade 0.5mm thick Spacing Cross Cut 1.66mm Spacing Rip Cut 2.62-4mm
£21.00 inc VAT

Replacement Blade for Kataba Classic Saw
Replacement Blade for Kataba Classic Saw
Replacement blade for the Kataba Classic Saws. 220mm 0.4mm thick blade 250mm 0.5mm thick blade 300mm 0.6mm thick blade
from £15.00 inc VAT
Replacement Blade for Kataba Gold & Meiko Gold SawReplacement Blade for Kataba Gold & Meiko Gold Saw
Replacement Blade for Kataba Gold & Meiko Gold Saw
Replacement blades for the Kataba Gold and Meiko Gold Saws. Kataba Gold 240 - 240mm blade - 0.4mm thick, spacing 1mm setting 0.45mm WKG240 Kataba Meiko Gold 250 - 250mm blade - 0.5mm thick WKG250M - This is a very clever saw combining x-cut and rip teeth on one edge of a 0.5mm thick blade.
from £16.00 inc VAT

Replacement Blade for Ryoba 240mm Classic Saw
Replacement Blade for Ryoba 240mm Classic Saw
Replacement blade for the 240mm Ryoba Classic Saw. 0.5mm thick blade with trapezoid teeth for crosscuts andt triangular teeth for rip-cut.
£21.00 inc VAT
Replacement Blade for Ryoba Gold Saw
Replacement Blade for Ryoba Gold Saw
Replacement blades for Ryoba Gold Saw. A double edged blade with X-cut & rip edges and traditional style handle. A choice of 4 sizes 220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220 240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size. 270mm blade - 0.6 mm thick...
from £30.00 inc VAT

Replacement Blade for Universal Douzuki Saw
Replacement Blade for Universal Douzuki Saw
Replacement blade for the Universal Douzuki Saw. This saw combines both rip and cross cut on one cutting edge J-WDU245 spacing 1.5 mm (finer) J-WDU248 spacing 1.8 mm (coarser)
£18.00 inc VAT
Golden Series 4 Saw Set
Golden Series 4 Saw Set
Set of 4 Saws in traditional heavy linen roll. The set comprises: Ryoba Gold 240mm - doublesided for cross cut and rip cut Douziki Gold 210mm - a very fine blade (0.2mm thick) Douziki Gold 240mm - a more robust blade Kataba Gold 240mm - single edge cross cut with no spine to allow deeper cuts.
£199.00 inc VAT

Golden Series 2 Saw Set
Golden Series 2 Saw Set
This set comprises the short 150mm blade very fine Douzuki (0.2mm thickness blade) and the Meiko saw which combines cross-cut and rip cut teeth on the saw edge. WDG150 + WKG250M
£69.00 inc VAT
Douzuki Classic SawDouzuki Classic Saw
Douzuki Classic Saw
A dovetail saw with back, very fine teeth especially suitable for cutting tenon shoulders and precise wood joints. A short robust little saw, 0.3mm thick blade.
from £28.50 inc VAT

Douzuki Gold SawDouzuki Gold Saw
Douzuki Gold Saw
The Douzuki has a metal spine to give some rigidity to the blade. Professional quality pull saws with replaceable blades. These blades are robust and with usual wear they should last a long time. More care must be taken with the thinnest blade such as the Douzuki 150 & 210 saws which are designed for very fine cuts. A choice of 4 sizes Douzuki Gold 150 - 150mm blade - 0.2mm thick, spacing...

5

from £38.00 inc VAT
Ryoba Gold Saw
Ryoba Gold Saw
A double edged blade with X-cut & rip edges and traditional style handle. A choice of 4 sizes 220mm blade - 0.4mm thick (spacing of teeth 1.3mm cross 2.0-3.4mm rip cut setting 0.7mm) WRG220 240mm blade - 0.5mm thick (spacing of teeth 1.6mm cross 2.7-3.9mm rip cut setting 0.75mm) WRG240 - This is our most popular size. 270mm blade - 0.6 mm thick (spacing of teeth 2.5mm crosscut, 3.3-5.8mm...
from £55.00 inc VAT

Ryoba 240mm Classic Saw
Ryoba 240mm Classic Saw
Combination saw with trapezoid teeth for crosscuts andt triangular teeth for rip-cut. Universal saw for workshop and carpentry, also ideal for mortice and tenon joints. 0.5mm thick blade, now supplied without rattan on handle.
£37.50 inc VAT
Kataba Classic Saw
Kataba Classic Saw
Fine toothed saw without back for trimming and deep cuts. The flexible blade also makes it extremely suitable for work in hard to reach areas. 250mm 0.5mm thick blade 300mm 0.6mm thick blade Now supplied without rattan on handle
from £29.00 inc VAT
Page: 1 | 2 | 3 |