Classic Hand Tools Limited - Robert Sorby Pro-Edge Jigs & Accessories

Secure Online Shopping

Online Catalogue > Shop by Manufacturer > Manufacturers N-Z > Robert Sorby Tools > Robert Sorby Pro-Edge
Sharpening System &
The Universal Sharpening
System > Robert Sorby Pro-Edge Jigs & Accessories

Robert Sorby Pro-Edge Jigs & Accessories

These optional extra jigs, honing wheels and buffing mops may be added to give the Pro-Edge even greater versatility.

Note the Skew Chisel Jig, the Fingernail Gouge Profiler and the Standard Gouge Jig are included in the Pro-Edge Plus (Deluxe).

Robert Sorby Pro-Edge Skew Jig Ref: RS-PESKEW

The Skew Jig allows the turner to accurately and safely sharpen his skew chisels.

Price incl VAT

Price: £11.87 (Including VAT at 20%)

Quantity:

Robert Sorby Fingernail Profiler Ref: RS-446/447UPG

The Fingernail Profiler helps you create that perfectly sharpened fingernail bowl or spindle gouge.

Price incl VAT

Price: £49.78 (Including VAT at 20%)

Quantity:

Robert Sorby Standard Gouge Jig Ref: RS-PEVB

Allows easy sharpening of all standard ground woodworking gouges.

Price incl VAT

Price: £20.53 (Including VAT at 20%)

Quantity:

Robert Sorby Woodworking Chisel Jig Ref: RS-PESQ

Accurately ensures a straight cutting edge on any woodworking chisel.

Price incl VAT

Price: £11.87 (Including VAT at 20%)

Quantity:

Robert Sorby Woodworkers' Square Guide Ref: RS-PESQW

For the popular ProEdge sharpening machine Robert Sorby is pleased to announce the launch of its new Woodworker's Square Guide (ref PESQW). This simple to use jig has been designed as an upgrade to the current woodworking chisel jig (PESQ). The new jig can be adjusted to ensure exact and repeatable 90 degree angles can be achieved every time. A stepped plate raises the tool to be sharpened away from the tool platform. Ideal for sharpening chisels and plane irons.

Price incl VAT

Price: £16.50 (Including VAT at 20%)

Quantity:

Robert Sorby Short Tool Platform with arm Ref: RS-PESPC

Increases access when tools are getting old and worn.

Price incl VAT

Price: £14.62 (Including VAT at 20%)

Quantity:

Robert Sorby Cutter Holder Ref: RS-472

To hold tips and cutters securely.

Price incl VAT

Price: £6.44 (Including VAT at 20%)

Quantity:

Robert Sorby Honing Wheel Arbor Ref: RS-PEARBOR

Price: £11.87 (Including VAT at 20%)

Quantity:

Robert Sorby Honing Wheel - Ref: RS-PEBOND

Price: £23.57 (Including VAT at 20%)

Quantity:

Robert Sorby Pigtail Mandrel Ref: RS-PEPIG

Price: £11.87 (Including VAT at 20%)

Quantity:

Robert Sorby Buffing Mop Ref: RS-PEMOP

Price: £15.43 (Including VAT at 20%)

Quantity:

Robert Sorby Honing Paste Ref: RS-475

Applied to a buffing mop the honing paste creates a highly polished finish on any steel.

Price incl VAT

Price: £6.23 (Including VAT at 20%)

Quantity:

Robert Sorby Pro-Edge Long Grind Jig Ref: RS-PELGJ

Helps you to create three different fingernaiil profiles.

Price incl VAT

Price: £9.95 (Including VAT at 20%)

Quantity:

Robert Sorby Pro-Edge Proset Ref: RS-PROSET

Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.

By placing the gouge into the clamp of the profile arm and then extending the gouge up-to the required stop and locking it into place will allow for precise and repeatable bevel angles to be obtained.

Price incl VAT

Price: £11.75 (Including VAT at 20%)

Quantity:

Robert Sorby Pro-Edge Knife Jig

The latest new product from Robert Sorby is the Knife Sharpening Jig for the ProEdge Sharpening System.

The jig consists of all parts required to convert a ProEdge, a new back plate, raised wear plate, universal arm and knife holder. The kit includes instructions on fitting and should only take a few minutes to fit onto the ProEdge. It is available in two sizes, with a small knife holder for pocket knives, carving knives and blades upto 8" long and with a large knife holder for hunting knives and blades over 8". The jigs are universal so a customer can buy the other knife holder to enable all sizes to be sharpened. The clamp on the knife holder has three screws, two clamping screws and a jacking screw to enable different thickness of blades to be safely held. The adjustable collar on the arm will allow different bevel angles to be sharpened from a steep angle for a woodcarving knife to a shallow angle for a fish filleting knife.

Note - The holders can be used with either the large or small jig, you do not need to buy both jigs.

Robert Sorby Pro-Edge Knife Jig Small Ref: PEKJIGS

Price: £50.99 (Including VAT at 20%)

Quantity:

Robert Sorby Pro-Edge Knife Jig Large Ref: PEKJIGL

Price: £50.99 (Including VAT at 20%)

Quantity:

Robert Sorby Pro-Edge Knife Holder Small Ref: PEKHS

Small Knife Holder can be used for pocket knives, carving knives and blades up to 8" long.

Price incl VAT

Price: £20.09 (Including VAT at 20%)

Quantity:

Robert Sorby Pro-Edge Knife Holder Large Ref: PEKHL

For hunting knives and those with blades over 8".

Price incl VAT

Price: £20.09 (Including VAT at 20%)

Quantity:

Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement

Woodworking Books on Tools and Allied Trades - Roy Arnold Books

DVDs

Paul Sellers - The Artisan Course

Robert Sorby Pro-Edge Jigs & Accessories

Robert Sorby Pro-Edge Knife Jig