VAT REDUCTION TO 15%
Please note that
some
displayed
prices may still
refer
to vat at 17.5%. This is only a textual reference.
ALL
prices are automatically calculated at 15%
at the check out
Rob Cosman - Shaker Box Making Kit
Shop by Manufacturer
Auriou Rasps & Rifflers
Axes & Woodland Craft Tools
Books & DVDs
Brusso Hinges
Burnishers & Hand Scrapers
Chairmaking Tools
Chisels & Mallets
Dowel Plates
Drawknives
Dust Filtration
Finishes, Glues & Sanding
Gifkins Dovetail Jig
Gift Vouchers
Planes, Blades, Tool Care
Japanese Kitchen Knives
Japanese Hand Tools
Lamello
Manu Laplace Knives
Marking/Measuring & Layout Tools
Clamps
Saws and Saw Files
Sharpening Products
Woodturning Tools
Sauno Wood Kiln
Musical Instrument Makers Tools
Spokeshaves
Woodcarving Tools
Workbenches & Tool Chests
Secure Online Shopping
Online Catalogue
>
Books & DVDs
>
DVDs
>
Rob Cosman DVDs
Technique Series DVDs
Hand-Cut Dovetails - Technique Series #1
Ref: RCDVD1
Hand-Cut Dovetails - bench side instruction on cutting "through dovetails" from tool selection to assembly, 45mins
Price: £21.45
(Including VAT at 15%)
Quantity:
Hand Planing & Sharpening - Technique Series #2
Ref: RCDVD2
Hand Planing & Sharpening - how to sharpen and use hand planes. 45 mins
Price: £21.45
(Including VAT at 15%)
Quantity:
Advanced Hand-Cut Dovetails- Technique Series #3
Ref: RCDVD3
Advanced Hand-Cut Dovetails - bench side instruction on hand-cutting hounds touth, half blind and mitred edge dovetails. 1 hour.
Price: £24.96
(Including VAT at 15%)
Quantity:
Rough to Ready - Technique Series #4
Ref: RCDVD4
Rough to Ready - instruction on how to square, flat & true timber from rough to smooth. 45 mins
Price: £21.45
(Including VAT at 15%)
Quantity:
Drawer Making - The professional approach - Technique Series #5
Ref: RCDVD5
DRAWER MAKING - TRIPLE LENGTH DVD
This is triple value as it is 2 1/4 hours long and takes through the techniques involved in making piston fit drawers.
Price: £32.00
(Including VAT at 15%)
Quantity:
Hand-Cut Mortise and Tenon - Technique Series #6
Ref: RCDVD6
Bench-side instruction on hand cutting the mortise and tenons and through wedged tenon
additional instruction on sharpening tenon saws and mortise chisels.
Double DVD Set, 2 Hours 10 Minutes
Price: £32.00
(Including VAT at 15%)
Quantity:
Mastering The Dovetail Saw - Technique Series #7
Ref: RCDVD7
The New Rob Cosman DVD - Mastering The Dovetail Saw.
Benchside instruction on the proper use and care of your dovetail saws.
45 mins
Price: £21.45
(Including VAT at 15%)
Quantity:
Scraping Wood - Technique Series #8
Ref: RCDVD8
Scraping Wood - Bench side instruction on tuning, sharpening and using scraping tools. Over 1 1/2 hours of personal instruction from the bench of one of today's leading hand tool coaches.
Price: £26.90
(Including VAT at 15%)
Quantity:
Rob Cosman Technique Series DVD Set of 8
Ref: RCDVDSET
ROB COSMAN TECHNIQUE SERIES DVD SET OF 8 DVDS
Over 9 hours of learning from the comfort of your armchair
- Hand Cut Dovetails
- Hand Planing & Sharpening
- Advanced Hand-Cut Dovetails
- Rough to Ready
- Drawer Making
- Mortise & Tenon
- Mastering the Dovetail Saw
- Scraping Wood
RCDdvdset8
Price: £181.50
(Including VAT at 15%)
Quantity:
Master Craftsman Series DVDs
Making Shaker Oval Boxes - Master Craftsman Series
Ref: RCDVD10
Making Shaker Oval Boxes - Bench side instruction on making Shaker oval boxes, trays and carriers. Enjoy this exciting project DVD! 1 hour, 25 minutes
CODE RCDVD10
Price: £26.90
(Including VAT at 15%)
Quantity:
"The Alan Peters Approach" DVD 6
Ref: RCDVD
In the shop with master craftsman Alan Peters, design and construction of fine furniture.
This DVD from Rob Cosman is a tribute to the extraordinary skills of British master craftsman Alan Peters. 53 Minutes Available now!
CODE RCDVD6
Price: £21.45
(Including VAT at 15%)
Quantity:
Rob Cosman/Chris Pye Woodcarving DVD - No. 1 - Sharpening Techniques
Ref: RCDVDCP1
New from Rob Cosman and master woodcarver Chris Pye. Rob is the student as Chris teaches him the basics of how to get carving tools sharpened correctly. This is bench side instruction on how to make a gouge do more than you may have thought possible. Chris starts with a new tool and carfefully guides you through all the steps of preparation to finally achieve that desired cutting edge. You are guided through the maze of available chisels, Chris answers the how's and whys and suggests where to start when it comes to acquiring tools. Included in this dvd are a few of the practises Chris was taught during his apprenticeship that are not widely known. Chris Pye is an excellent teacher and Rob Cosman proves to be an attentive student.
1hr 52 min
Price: £25.93
(Including VAT at 15%)
Quantity:
Rob Cosman/Chris Pye Woodcarving DVD No.2 Letter Carving with Chris Pye
Ref: RCDVDCP2
Chris Pye gives Rob Cosman bench side Instruction on Essential Letter Carving Techniques.
* What tools to use for letter carving
* Cutting straight sections
* Mallet techniques (using a mallet with either hand)
* Adding serifs
* Step by step carving of junctions
* Selecting gouges for curves
DVD - 1 hour 29 minutes
Price: £25.93
(Including VAT at 15%)
Quantity:
Rob Cosman/Chris Pye Woodcarving DVD No.3 Ornamental Carving with Chris Pye
Ref: RCDVDCP3
Bench side instruction of furniture ornamentation - carving corner leaves
This DVD is available from Mid November 2007
DVD - 2 hours
Price: £30.97
(Including VAT at 15%)
Quantity:
Rob Cosman/Chris Pye Master Craftsmen Series All 3 Woodcarving DVDS Special Offer Ornamental Carving with Chris Pye
Ref: RCDVDCP123SET
Over 5 hours of tuition by Master Craftsmen!
Sharpening Techniques + Lettercarving + Ornamental Carving
3 DVD deal - all 3 DVDs (for shipping after mid November 2007)
Price: £69.99
(Including VAT at 15%)
Quantity:
Project Series DVDs
The Wood Hinge Box
Ref: RCDVDPS1
The first of Rob Cosman's Project Series DVDs
The Wood-Hinge Box features:
- tips for accurate stock preparation.
- Rob's box making jigs
- jigs for making dowels
- Rob's dowel-drilling jigs
- shooting boards and planing jigs
- step by step construction of the wood hinge
- tips for proper assembly and gluing
- finishing options
- additional footage on building the jigs.
1 hour 45 minutes.
Rob uses his own design ¼ dowel centre drilling jig in the DVD, this should fit any 3/8 chuck and is ready to use.
Price: £26.90
(Including VAT at 15%)
Quantity:
1/4 Dowel Centre Jig
Ref: COSJIG
As seen on "The Woodhinge Box" this is Rob's 1/4 dowel centre drilling jig.
Should fit any 3/8" chuck, ready to use.
Price: £24.96
(Including VAT at 15%)
Quantity:
Online Catalogue
>
Books & DVDs
>
DVDs
>
Rob Cosman DVDs