Classic Hand Tools Limited - Ray Iles Woodworking

Secure Online Shopping

Online Catalogue > Shop by Manufacturer > Manufacturers N-Z > Ray Iles Woodworking

Ray Iles Draw Knife Ref: MA DK

8" cutting edge, Mike Abbott, designed canted draw knife with beech handles. This 8” drawing knife has slightly flared handles which are bent backwards, meaning the handles are at approximately the same angle, whether you are using them back down, or cannel down.

Made in England

Price: £44.93 (Including VAT at 20%)

Quantity:

Ray Iles 8" Draw Knife Ref: RI-DK8
This is a standard carpenter's draw knife, made from 01 high carbon steel and fitted with beech handles and brass ferrules.

Price: £44.93 (Including VAT at 20%)

Ray Iles 6" Draw Knife Ref: RI-DK6

This is a standard carpenter's draw knife, made from 01 high carbon steel and fitted with beech handles and brass ferrules.

Price: £36.77 (Including VAT at 20%)

Quantity:

Rounding Planes - Air Dried Beech Rounders - Ray Iles Ref: RIR

A rounder is also known as rotary plane and is used to create accurate tenons or for rounding spindles for chairs. All of these 6 rounders are made by Ray Iles.

The thick blade is held in place by two washered screws which allows you to adjust or remove the blade for sharpening very easily.

Beech body, lightly linseed oiled.

Having reduced your spindle to a little over the size of the rounder (the size is stamped on the beech body), first secure your spindle in a vice. Then thread the rounder downwards over the spindle and it will create a uniform diameter spindle or tenon.

Chose your rounder size according to the finished diameter you require.

Prices include VAT

Quantity:

Size

9/16" : RIRP 9-16 £40.18
7/8" : RIRP 7-8 £40.18
5/8" : RIRP 5-8 £40.18
3/4" : RIRP 3-4 £40.18
1/2" : RIRP 1-2 £40.18
1" : RIRP 1-0 £40.18
Full set of 6 Rounders : RIRP X 6 £229.04

Ray Iles Replacement Irons Ref: RIRI

Ray Iles range of carbon steel blades for bench and block planes, spokeshaves & special purpose planes.

Stanley Bailey Replacement Irons - these are 50% thicker than standard irons and manufactured from 01 high carbon, oil hardened tool steel. The extra thickness helps eleiminates chatter.

These irons also fit Record & Preston Bench Planes

Prices include VAT

Quantity:

Size

1 3/4" wide plane blade Code RI 175 £25.54
2" wide plane blade Code RI 200 £27.06
2 3/8" wide plane blade Code RI 238 £29.11

Ray Iles Rebate Plane Replacement Iron Ref: RI001

This replacement iron fits Stanley Plane No. 10, 10 1/4, 10 1/2 & Record Plane No.s 010 & 010 1/2.

These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.

Prices include VAT

Price: £20.82 (Including VAT at 20%)

Quantity:

Ray Iles Replacement Iron for Stanley & Record 60 1/2 Low Angle Block Planes Ref: RI003

For the Record 060 1/2 and 0230. Stanley 60, 60 1/2, 61 and 103.

High grade carbon steel hardened to 59 - 61 Rockwell C.

Please specify if you require an older style iron with grooves (RI 003G) or with slots

(see picture - RI 003S)

Prices include VAT

Quantity:

Size

Older style with grooves: RI 003G £15.32
Modern style with slots: RI 003S £15.32

Ray Iles Replacement Iron for Stanley & Record 9 1/2 Block Planes Ref: RI004

For the Record 09 1/2, 015, 016, 017, 018, 019, 0120 and 0220. Stanley 9 1/4, 9 1/2, 9 3/4, 15, 15 1/2, 16, 17, 18, 19, 118, 220 and A18.

High grade carbon steel hardened to 59 - 61 Rockwell C.

Please specify whether you require old style RI 004G (with grooves as pictured) or new style with slots RI 004S

Prices include VAT

Quantity:

Size

Older style with grooves: RI 004G £15.32
Modern style with slots: RI 004S £15.32

073 Shoulder Plane - Ray Iles Replacement Iron Ref: RI005

This replacement Iron fits the Classic Record 073 shoulder plane.

These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.

Prices include VAT

Price: £18.89 (Including VAT at 20%)

Quantity:

Bullnose Replacement Iron Ray Iles Ref: RI007

This replacement iron fits the Record Bullnose No.s 076, 077, 077A & the equivalent plane by Preston. This iron also fits the Record 311.

These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.

Prices include VAT

Price: £16.63 (Including VAT at 20%)

Quantity:

Preston Replacement Spokeshave iron Ref: RI009

This Ray Iles replacement iron fits the Preston Adjustable Spokeshave.

Made from of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C.

Prices include VAT

Price: £12.25 (Including VAT at 20%)

Quantity:

Stanley 66 Replacement Irons Ref: RI011

This replacement cutters fit the Stanley No.66 hand beader. Set of 8, as per original pattern.

These replacement irons are made of high carbon steel which is oil hardened and tempered to 59 - 61 Rockwell C and will have edge keeping qualities equal to the originals.

Prices include VAT

Price: £40.80 (Including VAT at 20%)

Quantity:

Online Catalogue > Shop by Manufacturer > Manufacturers N-Z > Ray Iles Woodworking

Home - Terms & Conditions - Site Map - Shipping - About Us - Contact Us - Visit Us - Privacy Statement